Instruction/ maintenance manual of the product ER36GISCH/NG Dacor
Go to page of 20
Ins t all a tio n Ins t r uc t ions Epi c ure ® 3 6 - Inch Gas R ange Part No. 106554 Rev . B THIS APPLIANCE HAS BEEN TESTED IN ACCORDANCE WITH THE LA TEST EDITION OF ANSI Z21.
Important Safety Instructions ..................................................... 1 Important Information About Safety Instructions......................... 2 General Safety Precautions ........................................................ 2 Installation Specifications .
1 Impor tant Infor mation About Safety Instructions The Important Safety Instructions and warnings in this Manual are not meant to cover all possible problems and conditions that can occur . Use common sense and caution when installing, maintaining or operating this appliance.
2 Impor tant Safety Instructions General Safety Precautions T o reduce the risk of fire, explosion, electric shock, serious injury or death when installing or using this appliance, follow basic safety precautions, including the following: Read the accompanying use and care manual completely before operating this appliance.
3 Impor tant Safety Instructions Installation Specifications Product Dimensions Do not operate the cooktop without the knobs and trim rings in place. • Non-stick coatings, when heated, can be harmful to birds. Remove birds to a separate, well-ventilated room during • cooking.
4 Installation Specifications W ARNING Observe all governing codes and ordinances during • planning and installation. Contact your local building department for further information. T o prevent an electric shock hazard, the power supply • must meet the specifications stated below .
5 Installation Specifications Any openings in the wall behind the appliance or in the • floor underneath it must be sealed. If cabinet storage space is to be provided directly • above the ra.
6 Installation Specifications Installation Instructions V erifying the Package Contents Unpack the range and verify that all required parts have been provided. If any item is missing or damaged, please contact your dealer immediately . Do not install a damaged or incomplete appliance.
7 Installation Instructions Backguard Kit Installation See page 3 for available model numbers and compatibility . If installing a backguard other than the standard size, install it before pushing the range into place. Install the kit according to the accompanying installation instructions.
8 Attach the self-rimming side panels included with the 1 1) unit by snapping the ball studs on the front into the back of the control panel and kick panel. The finished side of each side panel faces out. Fasten the top of each side panel to the control panel 12) with two of the included #8 x 1/4” T orx screws (A).
9 Door Removal Remove the door to make the range easier to move during the installation process. W ARNING Do not attempt to disengage the hinge catches with • the door removed from the oven. The hinge springs could release causing personal injury .
10 Installation Instructions Gas Connection W ARNING Make sure the gas is turned off at the gas supply • valve before connecting the gas line. V erify that the gas supply meets specifications before • connection. See page 4. Do not apply excessive pressure when tightening gas • connections and fittings.
11 Installation Instructions Moving the Range to Final Location Peel the protective plastic coating off of the range, 1) including the range door . Uncoil the power cord and route it to the electrical 2) outlet so that it does not become trapped behind the range when it is pushed back.
12 Installation Instructions Cooktop Assembly W ARNING Never attempt to operate the range’s cooktop with any of the burner rings, burner caps or grates removed. Remove the burner rings, burner caps and grates from 1) their shipping cartons. Install the burners as shown.
13 V erifying Proper Operation W ARNING Before operating the range, read the accompanying use and care manual completely . Before beginning the test procedure, 1) make sure all range control valves are in the “ OFF” position, and all burner rings, burner cap and grates are properly positioned on the spill tray .
14 W iring Diagram W S4 S3 B W RESET HI-LIMIT (250° F) W W PLUG W BURNER TO BROIL GAS INLET GAS V ALVE BR TO BAKE BURNER W Y W W B B GR W W CORD SUPPL Y B W BR Y CONVECTION FAN MOT OR 41W, 120V BAKE .
15 Notes.
16 Notes.
.
Dacor ● 1440 Bridge Gate Drive, Diamond Bar , CA 91765 ● T el: (800) 793-0093 ● FAX: (626) 403-3130 ● www .Dacor .com.
An important point after buying a device Dacor ER36GISCH/NG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dacor ER36GISCH/NG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dacor ER36GISCH/NG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dacor ER36GISCH/NG you will learn all the available features of the product, as well as information on its operation. The information that you get Dacor ER36GISCH/NG will certainly help you make a decision on the purchase.
If you already are a holder of Dacor ER36GISCH/NG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dacor ER36GISCH/NG.
However, one of the most important roles played by the user manual is to help in solving problems with Dacor ER36GISCH/NG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dacor ER36GISCH/NG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
