Instruction/ maintenance manual of the product 533 3M
Go to page of 6
November 201 1 78-8135-7466-8-B 3 3M ™ SLi C 530/533/ 7 33- 2 Po r t 0 . 6 1 C able E nt r y B r ack e t 3M ™ SLiC 530/533/ 7 33- 2 Po r t -MSM 0 .
2 78-8135-7466-8-B 1.0 Kit Contents Note: V isually inspect all components. If any component is missing or appears damaged, do not install. Call 3M customer service at 1-800-426-8688 for a replacement product. 1.1 Kit Contents SLiC 530/533/733-2 Port 0.
3 78-8135-7466-8-B 3.0 Cable Addition Brack et Assembly Installation 3.1 Remove screw on the 3M ™ Scotchlok ™ Shield Bond Connector 4464 and swing the plate to the side. If the shield connector is installed with rivets, do not perform this step. 3.
4 78-8135-7466-8-B 4.0 Grommet Assembly Installation using the 3M ™ Scotchlok ™ 4460-D/FO-CSM For LBT 4.1 Please refer to instruction manual 78-0013- 2695-4 3M Scotchlok Shield Bond Connector Assembly 4460-D/FO-CSM for LBT for installation instructions.
5 78-8135-7466-8-B 6.3 Using the supplied hose clamp, secure cables to the cable addition bracket and cable management tray frame as shown. T ighten hose clamp between 25 to 30 in.
3M, Scotch, Scotchlok and SLiC are trademarks of 3M Company . Important Notice All statements, technical information, and recommendations related to 3M’ s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed.
An important point after buying a device 3M 533 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 533 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 533 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 533 you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 533 will certainly help you make a decision on the purchase.
If you already are a holder of 3M 533, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 533.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 533. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 533 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
