Instruction/ maintenance manual of the product Tensioned Professional Electrol Da-Lite
Go to page of 8
DA-LITE SCREEN COMP ANY , INC. 3100 North Detroit Street Post Office Box 137 Warsaw , Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 www .da-lite.com e-mail: info@da-lite.com Instruc tion Book for TENSIONED PROFESSIONAL ELEC TROL® T he Da-Lit e Diff er ence .
IMPORT ANT SAFETY INSTRUCTIONS When using your video equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Position the cord so that it will not be tripped over , pulled, or contact hot surfaces.
PRE-INST ALLA TION 2 1. Carefully unpack screen. 2. Make sure to recheck measurements of screen location before installation. 3. Remove instruction cover plate (Fig. 1). Do not remove wrapping paper until screen is installed. 4. Remove the retainer screws from the slat bar before the case has been installed (Fig.
TENSIONED PROFESSIONAL ELECTROL ® INST ALLA TION 3 CEILING TYPE HANGER PICTURE SURF ACE PICTURE SURF ACE 1" x 3" CLEA T 2" MOULDING CEILING MOUNT WITHOUT HANGERS Screen case is placed flush with the wall and ceiling and held in position by moulding securely attached to the wall.
4 TENSIONED PROFESSIONAL ELECTROL ® INST ALLA TION TO JUNCTION BOX MOUNTED IN SCREEN CASE, IN WHICH INTERNAL WIRING TERMINA TES IN WHITE, BLACK, AND RED LEADS. IN MUL TIPLE CONTROL INST ALLA TIONS THE SWITCH IS REPLACED BY THE LOW VOL T AGE CONTROL, OPERA TED FROM PUSH BUTTON ST A TIONS.
5 TROUBLESHOOTING SYMPTOM 1. Screen will not operate. Motor does not hum. 2. Incorrect stopping position in downward direction. 3. Incorrect stopping position in upward direction. 4. Noise. NOTE: Screen will operate with a low pitched hum. 5. Coasting.
6 THIS P AGE IS INTENTIONALL Y LEFT BLANK.
7 Printed in U.S.A. 33871 3/11 LIMITED ONE YEAR W ARRANTY ON DA-LITE PRESENT A TION PRODUCTS Da-Lite Screen Company , Inc. warrants its products to the original purchaser only , to be free from defect.
An important point after buying a device Da-Lite Tensioned Professional Electrol (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Da-Lite Tensioned Professional Electrol yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Da-Lite Tensioned Professional Electrol - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Da-Lite Tensioned Professional Electrol you will learn all the available features of the product, as well as information on its operation. The information that you get Da-Lite Tensioned Professional Electrol will certainly help you make a decision on the purchase.
If you already are a holder of Da-Lite Tensioned Professional Electrol, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Da-Lite Tensioned Professional Electrol.
However, one of the most important roles played by the user manual is to help in solving problems with Da-Lite Tensioned Professional Electrol. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Da-Lite Tensioned Professional Electrol along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
