Instruction/ maintenance manual of the product Tensioned Dual Masking Electrol Da-Lite
Go to page of 8
DA-LITE SCREEN COMP ANY , INC. 3100 North Detroit Street Post Office Box 137 Warsaw , Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 T oll Free Fax: 877-325-4832 www .da-lite.com e-mail: info@da-lite.com Instruc tion Book for TENSIONED DU AL MASKING ELEC TROL® T he Da-Lit e Diff er enc e .
1 IMPORT ANT SAFETY INSTRUCTIONS When using your video equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Position the cord so that it will not be tripped over , pulled, or contact hot surfaces.
2 PRE-INST ALLA TION 1. Carefully unpack screen and remove outer wrapping from case. 2. Make sure to recheck measurements of screen location before installation. 3. Remove center support brackets (on 8' and wider screens only), reverse brackets and reinstall flush with the top of the box.
3 SCREEN ADJUSTMENT CAUTION! THE MASK SHOULD NOT BE FIELD ADJUSTED FOR MORE OR LESS DROP . s ! DOWN BLACK UP DOWN COMMON WHITE COMMON GROUND GREEN GROUND MASK SCREEN UP DOWN MASK MOTOR 4 – WIRE MASK MOTOR UP OFF DOWN 4 – WIRE SCREEN MOTOR SCREEN MOTOR 115V .
4 UP BROWN DOWN COMMON BLACK BLUE UP GREEN 4 – WIRE MASK MOTOR GROUND MASK MOTOR MASK SCREEN UP UP OFF DOWN DOWN BROWN DOWN BLACK COMMON BLUE GROUND GREEN 4 – WIRE SCREEN MOTOR SCREEN MOTOR 220V .
5 SUggESTED METHODS OF INST ALLA TION Offset mounting, recessed above ceiling. For plaster , dry wall, tile or paneling. Bottom of case painted same finish as ceiling. Offset mounting, recessed above ceiling. May be adapted for 3/4" ceiling, but cut to 1/4" thick under screen case and panel.
6 Printed in U.S.A. 77607 Rev . 3/95 TROUBLESHOOTINg SYMPTOM 1. Screen will not operate. Motor does not hum. 2. Incorrect stopping position in downward direction. 3. Incorrect stopping position in upward direction. 4. Noise. NOTE: Screen will operate with a low pitched hum.
7 Printed in U.S.A. 79338 Rev . 03/10 LIMITED ONE YEAR W ARRANTY ON DA-LITE PRESENT A TION PRODUCTS Da-Lite Screen Company , Inc. warrants its products to the original purchaser only , to be free from.
An important point after buying a device Da-Lite Tensioned Dual Masking Electrol (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Da-Lite Tensioned Dual Masking Electrol yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Da-Lite Tensioned Dual Masking Electrol - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Da-Lite Tensioned Dual Masking Electrol you will learn all the available features of the product, as well as information on its operation. The information that you get Da-Lite Tensioned Dual Masking Electrol will certainly help you make a decision on the purchase.
If you already are a holder of Da-Lite Tensioned Dual Masking Electrol, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Da-Lite Tensioned Dual Masking Electrol.
However, one of the most important roles played by the user manual is to help in solving problems with Da-Lite Tensioned Dual Masking Electrol. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Da-Lite Tensioned Dual Masking Electrol along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
