Instruction/ maintenance manual of the product Tensioned Advantage Electrol Da-Lite
Go to page of 8
DA-LITE SCREEN COMP ANY , INC. 3100 North Detroit Street Post Office Box 137 Warsaw , Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 T oll Free Fax: 877-325-4832 www .da-lite.com e-mail: email@example.com Instruc tion Book for TENSIONED ADV ANT A GE® ELEC TROL® T he Da-Lit e Diff er ence .
1 1. Remove 2 screws to open junction box. 2. Hang case and attach to support structure with threaded rod. See suggested methods of installation on page 5. 3. T ighten bolts until trim flange is flush with ceiling. NOTE: For proper operation, screen assembly must be level after installation.
2 ADV ANT AGE ® ELECTROL ® INST ALLA TION 7-3/4" 6-1/16" 3/8" THREADED ROD (NOT INCLUDED) A TTACHED TO MOUNTING BRACKET SELF-TRIMMING FLANGE 6-3/8" 7-3/4" FINISHED CEILING 8" 6.42" 3/8" THREADED ROD (NOT SUPPLIED) HANGER BRACKET SEE DET AIL A 7.
3 TENSIONED ADV ANT AGE ® ELECTROL ® INST ALLA TION FOR 120V SCREENS UP OFF DOWN THIS SWITCH CAN NOT BE USED WITH L VC. 120V WIRING DIAGRAM FOR ST ANDARD W ALL SWITCH SPDT SWITCH WITH CENTER OFF AC .
120V WIRING DIAGRAM WITH OPTIONAL BUIL T -IN LOW VOL T AGE CONTROL GROUND–MUST BE CONNECTED TO BUILDING GROUND RJ-14 PIN-OUTS (T AB IS FACING UP) IMPORT ANT NOTE: The wall switch is REQUIRED to make any limit switch adjustments, EVEN if a third party control system is used.
LOW-VOL TAGE W ALL SWITCH OPTIONAL IR AND RF REMOTE CONTROL MOTOR BLUE (COMMON) BROWN (HOT) GREEN GROUND TO CASE 240VAC 50HZ 240V WIRING DIAGRAM WITH OPTIONAL BUIL T -IN LOW VOL T AGE CONTROL RJ9 UP S.
6 TROUBLESHOOTING SYMPTOM 1. Screen will not operate. Motor does not hum. 2. Screen does not stop at correct position. 3. Noise. NOTE: Screen will operate with a low-pitched hum. 4. Coasting. 5. Fabric hangs crooked. CAUSE (a) Incorrect line voltage. (b) Blown fuse.
LIMITED ONE YEAR W ARRANTY ON DA-LITE PRESENT A TION PRODUCTS Da-Lite Screen Company , Inc. warrants its products to the original purchaser only , to be free from defects in materials and workmanship .
An important point after buying a device Da-Lite Tensioned Advantage Electrol (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Da-Lite Tensioned Advantage Electrol yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Da-Lite Tensioned Advantage Electrol - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Da-Lite Tensioned Advantage Electrol you will learn all the available features of the product, as well as information on its operation. The information that you get Da-Lite Tensioned Advantage Electrol will certainly help you make a decision on the purchase.
If you already are a holder of Da-Lite Tensioned Advantage Electrol, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Da-Lite Tensioned Advantage Electrol.
However, one of the most important roles played by the user manual is to help in solving problems with Da-Lite Tensioned Advantage Electrol. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Da-Lite Tensioned Advantage Electrol along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center