Instruction/ maintenance manual of the product Pro Imager Vertical Masking System Da-Lite
Go to page of 8
DA-LITE SCREEN COMP ANY , INC. 3100 North Detroit Street Post Office Box 137 Warsaw , Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 www .
IMPORT ANT SAFETY INSTRUCTIONS When using your video equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Position the cord so that it will not be tripped over , pulled, or contact hot surfaces.
FRAME ASSEMBL Y 2 TOOLS REQUIRED FOR ASSEMBL Y 5/16" socket or wrench Carpenters level T ape Measure 1. Unpack frame pieces and lay them face down on the floor . The top frame has the roller and motor assembly attached to it. The side frames are the two short pieces.
3 1. T o install the Pro Imager over a Da-Lite Perm-Wall screen you will need to place the supplied wooden spacers between the screen and the wall. D a-Snap and Imager screens do not require any spacers. 2. Refer to figure 3 for hanger bracket location.
PRO IMAGER INST ALLA TION DOWN RED UP BLACK COMMON WHITE BLACK WITH YELLOW B LACK W HITE RED UP D OWN R OCKER S WITCH A C COMMON AC HOT O PERATING SWITCH, S WITCH BOX, AND P LATE FURNISHED W ITH SCREEN.
5 ADJUSTMENT Masking travel is stopped automatically in the up and down positions by limit switches that are properly adjusted at the factory . Should it be necessary to adjust the stop positions, proceed in the following manner using a small flat screwdriver or a 5/32" allen wrench.
6 TROUBLESHOOTING SYMPTOM 1. Screen will not operate or will not go “down” . Motor does not hum. Motor hums. 2. Screen will not move “up”. Motor does not hum. Motor hums. 3. Noise. NOTE: Screen will operate with a low-pitched hum. 4. Coasting.
Printed in U.S.A. 82391 Rev. 7/09 7.
An important point after buying a device Da-Lite Pro Imager Vertical Masking System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Da-Lite Pro Imager Vertical Masking System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Da-Lite Pro Imager Vertical Masking System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Da-Lite Pro Imager Vertical Masking System you will learn all the available features of the product, as well as information on its operation. The information that you get Da-Lite Pro Imager Vertical Masking System will certainly help you make a decision on the purchase.
If you already are a holder of Da-Lite Pro Imager Vertical Masking System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Da-Lite Pro Imager Vertical Masking System.
However, one of the most important roles played by the user manual is to help in solving problems with Da-Lite Pro Imager Vertical Masking System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Da-Lite Pro Imager Vertical Masking System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
