Instruction/ maintenance manual of the product Imager Da-Lite
Go to page of 6
DA-LITE SCREEN COMP ANY , INC. 3100 North Detroit Street Post Office Box 137 W arsaw , Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 T oll Free Fax: 877-325-4832 www .
1 LARGE WALL BRACKET (47" LONG) Quantities vary by screen size: Screens 80" and smaller viewing width = 1 Screens over 80" to 96" viewing width = 2 QUANTITY INCLUDED __________ Screens over 96" viewing width = 3 Installation screws not included SMALL WALL BRACKET (8" LONG) Quantity = 1.
SETTING UP YOUR SCREEN 2 TOOLS REQUIRED: Phillips Screwdriver Carpenter’ s Level T ape Measure FRAME ASSEMBL Y 1. Place the four frame pieces on a clean floor . 2. Slide the frame pieces together at corners. (Note: Frame assembly holes may not appear to fit properly at the corners until all fasteners have been attached.
3 Method 2 1. Secure the large wall bracket to wall studs at the desired height. Make sure the large bracket is level. The top of the frame will be 1/8" above the top of the large wall bracket when mounted. Y ou will need at least 5/8" clearance above the bracket to hang the screen.
4 Da-T ex ® , Dual Vision, Pearlescent, Cinema V ision, Da-Mat ® , High Contrast Da-Mat ® , Audio Vision, High Contrast Audio Vision, High Contrast Cinema V ision and High Contrast Cinema Perf surf.
Printed in U.S.A. 86478 Rev. 1/08 5.
An important point after buying a device Da-Lite Imager (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Da-Lite Imager yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Da-Lite Imager - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Da-Lite Imager you will learn all the available features of the product, as well as information on its operation. The information that you get Da-Lite Imager will certainly help you make a decision on the purchase.
If you already are a holder of Da-Lite Imager, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Da-Lite Imager.
However, one of the most important roles played by the user manual is to help in solving problems with Da-Lite Imager. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Da-Lite Imager along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
