Instruction/ maintenance manual of the product Cinema Contour Da-Lite
Go to page of 6
DA-LITE SCREEN COMP ANY , INC. 3100 North Detroit Street Post Office Box 137 W arsaw , Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 T oll Free Fax: 877-325-4832 www .
1 1. Unwrap the frame pieces. Assemble frame pieces on padding material or other soft, clean surface. This will help keep the frame clean and protect it from scratches. 2. Slide the frame pieces together at corners (Note: Frame assembly holes may not appear to fit properly at the corners until all fasteners have been attached.
2 2. T o install the lower wall bracket, you must measure the overall height of the screen frame and subtract 1-3/8". Using that dimension, measure down from the top edge of the wall bracket and mark the wall for two screw holes. The holes should be centered within the frame and 6" apart.
3 1. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. Y ou will need at least 5/8" clearance above the bracket to hang the screen.
4 METHOD 4 (HIGH POWER ® ) 1. Secure the large wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. Y ou will need at least 5/8" clearance above the bracket to hang the screen.
5 Printed in U.S.A. 87070 Rev. 1/08.
An important point after buying a device Da-Lite Cinema Contour (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Da-Lite Cinema Contour yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Da-Lite Cinema Contour - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Da-Lite Cinema Contour you will learn all the available features of the product, as well as information on its operation. The information that you get Da-Lite Cinema Contour will certainly help you make a decision on the purchase.
If you already are a holder of Da-Lite Cinema Contour, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Da-Lite Cinema Contour.
However, one of the most important roles played by the user manual is to help in solving problems with Da-Lite Cinema Contour. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Da-Lite Cinema Contour along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
