Instruction/ maintenance manual of the product office firewall D-Link
Go to page of 12
Review Package Contents Make sure that the package contains the following items. If any items are missing, contact the reseller. § DFL - 300 Firewall § Manual § Quick Install Guide § AC Power Adap.
Connecting the DFL - 300 cont inued… To setup the DFL - 300, begin by connecting the AC adapter to a power source. The Power LED on the front of the DFL - 300 should now be on. Connect one end of the Ethernet cable to the Internal/LAN port of the DFL - 300 and the other end of the cable into a hub or switch on your network.
Setti ng Up the Computer continued… Highlight the TCP/IP setting for the installed Ethernet Network Adapter. Click Properties At this screen, select the IP address tab. Select Obtain an IP Address Automatically. Click OK If you are prom pted to restart your computer, please do so.
Configuring the DFL - 300 Note: The DFL - 300 requires Internet Explorer 4.0 or higher, or Netscape Communicato r 4.0 or higher. Please open your Web Browser and enter this URL: http://192.168.1.1 This will launch the DFL - 300’s integrated web - based management system.
Configuring the DFL - 300 continued… If your ISP requires you to enter a username/password for a PPPoE connection, choose PPPoE (ADSL User) Fill in your PPPoE username and passwor d provided by your ISP.
Configuring the DFL - 300 continued… If your ISP assigns you a dynamic IP address, choose Dynamic IP Address (Cable Modem User) Fill in the Hostname if provided by your ISP.
Configuring the DFL - 300 continued… If your ISP assigns you a static IP address, choose Static IP Address Fill in the static IP information provided by your ISP. Click Ok at the bottom when done. Now set up the Outgoing Policy. Click on Policy on the left menu.
Configuring the DFL - 300 continued… Click on New Entry and enter the following: Source Address: Inside_Any Destin ation Address: Outside_Any Service: Any Action: Permit Click Ok There should now be an Outgoing Policy created. This policy will allow all computers in the Internal network to access the Internet.
Creating a VPN IPSec Tunnel This example will demonstrate how to create a Virtual Priva te Network (VPN) between two remote locations through the Internet. The VPN policy will use IPSec to securely send/receive encrypted data over the Internet. This example will consist of two DFL - 300 Office Firewalls with a simple setup to enable VPN.
We will begin by configuring the DFL - 300 at Site A . Start by going into the web configuration. Once in, go t o the VPN menu. You should now be under VPN>Autokey IKE . Click New Entry Please fill in the appropriate information for Site A. Name: Site_A From Source: Internal Subnet/Mask: 192.
There should now be a VPN Policy created for Site A. Site A is now complete, we will now configure Site B with the other DFL - 300. Follow the same steps previously with Site A to create a VPN policy. Please change the appropriate IP information. Name: Site_B From Source: Internal Subnet/Mask: 192.
Technical Support D - Link provides free technical support for customers within the United States during the warranty period. U.S. customers can contact D - Link Technical Support through our web site, by e - mail or by phone . D - Link Technical Support over Telephone : (949) 790 - 5290 6 a.
An important point after buying a device D-Link office firewall (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link office firewall yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link office firewall - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link office firewall you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link office firewall will certainly help you make a decision on the purchase.
If you already are a holder of D-Link office firewall, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link office firewall.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link office firewall. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link office firewall along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
