Instruction/ maintenance manual of the product 5000 Cyclades
Go to page of 8
This guide provides a summary of basic AlterPath™ Manager installation ta sks for installers who already know how to install and confi gure Cyclades AlterPath products. The following table lists basic tasks in the order they should be perfo rmed. For more- detailed procedures, go to the listed page numbers.
AlterPath Manager E2000, 2500, 50 00 Quick Start Guide 2 a. The shorter end brackets moun t onto the front of the outer rails. Use the two round screw holes in each front end bracke t to mount it in a fixed positi on to its respective out er rail. b. The longer end brackets mount onto the rear of the outer rails.
2. Making the Ethernet Co nnection 3 Figure 5: APM 5000 Front V iew with Control Buttons Figure 6: APM 5000 Rear V iew with Ports and Power Conne ctor There are two diagrams that show alternate LAN configurations. Choose either the “Single Network Setup” or the “Private Network Setup.
AlterPath Manager E2000, 2500, 50 00 Quick Start Guide 4 Figure 7: Single Network Setup T T o Set up a Privat e Network 1. Connect an Ethernet cable from the “Eth1” port on the AlterPath Manager to a hub or switch that is connected to your public Ethernet LAN.
3. Running t he First Ti me Configuration Wizard 5 . Figure 8: Private Network Setup 3. Running the First T i me Configuration Wizard The First T ime Configuration Wi zard includes parameters such as root and admin passwords, network configura tion parameters, and tim e and date .
AlterPath Manager E2000, 2500, 50 00 Quick Start Guide 6 • No parity • 1 stop bit • ANSI emulation 4. Power on the APM Boot information will scroll up on the screen fo r a short time until the system is ready for initial configuration input data.
3. Running t he First Ti me Configuration Wizard 7 3) 10 Mbps, half du plex 4) 100 Mbps, full duplex 5) 100 Mbps, ha lf du plex 6) 1000 Mbps, fu ll duplex 7) 1000 Mbps, half duplex • Enter the syste.
AlterPath Manager E2000, 2500, 5000 Quick Start Guide Cyclades Corporation 3541 Gateway Boulevard Fremont, CA 94538 USA 1.888.CYCLADES (292.5233) 1.510.771.6100 1.510.771.6200 (fax) http://www .cyclades.com Part Number: P AC0381 Release Date: April 2006 Note: In the following example, user input is shown in bold type.
An important point after buying a device Cyclades 5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cyclades 5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cyclades 5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cyclades 5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Cyclades 5000 will certainly help you make a decision on the purchase.
If you already are a holder of Cyclades 5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cyclades 5000.
However, one of the most important roles played by the user manual is to help in solving problems with Cyclades 5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cyclades 5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
