Instruction/ maintenance manual of the product VoIP Paging/Loudspeaker Amplifier CyberData
Go to page of 14
VoIP Paging/Loudspeaker Amplifier Configuration Guide CyberData Corporation 2555 Garden Road Monterey, CA 93940 (831) 373-2601.
CyberData Corporation Configuration Guide COPYRIGHT NOTICE: © 2009, CyberData Corporatio n, ALL RIGHTS RESER VED. This manual and related materials are the copyrigh ted property of CyberDat a Corporation.
Tech Note CyberData VoIP Paging Amplifier Configuration Guide TN086 August 08 1 Objectworld Comm unications Corp.
© 2007 ‐ 2008 Objectworld Communications Corp. All rights reserved. Published August 25, 2008 Objectworld, Objectworld Unified .
Table of Contents 1 Introduction ............................................................................................................................... ...................... 4 1.1 Network Topology .
1 Introduction The CyberData SIP ‐ enabled VoIP Paging Amplifier provides an easy method for implementing an IP ‐ based overhead paging system for both new and legacy installa tions.
1.1 Network Topology Below is an example of how the CyberData VoIP Paging Amplifier might be configured in your network. 5 Objectworld Comm unications Corp.
2 Known Integration Issues Known integration issues include: • Cannot perform supervised transfers o Performing a supervised transfer .
3 Preparation This section provides instructions about how to apply firmware updates (if necessary) and how to set up the device for manual configuration. 3.
8 Objectworld Comm unications Corp. • 308 Legget Drive • Ottawa, ON • Canada • K2K 1Y6 • T: 613 ‐ 599 ‐ 9698 • F: 613 ‐ 599 ‐ 7457 • www.
4 SIP Configurat ion 4.1 Gathering Information To configure the device, you need the following information. SIP User ID: This is equivalent to the identity address you want to associate with the device.
2. Login as the admin user. 3. Select the Identities tab in the left pane. 4. Go to View > Display identities for all Profiles.
7. Record the User/login name and password from the following dialog because yo u will need it later to configure the device. 4.2 Device Configuration 1.
12 Objectworld Comm unications Corp. • 308 Legget Drive • Ottawa, ON • Canada • 1Y6 • 613 ‐ 599 ‐ 9698 • F: 613 ‐ 599 ‐ 7457 • www.objectworld.com K2K T: 5 Troubleshooting 1.
An important point after buying a device CyberData VoIP Paging/Loudspeaker Amplifier (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CyberData VoIP Paging/Loudspeaker Amplifier yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CyberData VoIP Paging/Loudspeaker Amplifier - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CyberData VoIP Paging/Loudspeaker Amplifier you will learn all the available features of the product, as well as information on its operation. The information that you get CyberData VoIP Paging/Loudspeaker Amplifier will certainly help you make a decision on the purchase.
If you already are a holder of CyberData VoIP Paging/Loudspeaker Amplifier, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CyberData VoIP Paging/Loudspeaker Amplifier.
However, one of the most important roles played by the user manual is to help in solving problems with CyberData VoIP Paging/Loudspeaker Amplifier. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CyberData VoIP Paging/Loudspeaker Amplifier along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
