Instruction/ maintenance manual of the product PB2200 Aigo
Go to page of 20
Part 1 FCC Notes: This equipment gen erates, uses, and can radi ate radio frequ ency energy and , if not installed and used in accordance with the instructions manual, ma y cause interference to radio communications.
Part 2 ALERT TO OUR HONORABLE CUSTOMERS: Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences.
Part 3 BRIEF INTRODUCTION THE USER’S MANUAL The purpose of this manual is to guide the u ser in the initial installation a nd general use of the Posi flex PB-2200 Pro series of POS terminals. It does not explain any app lication s oftware that m ay be supplied with it.
Part 4 THE STANDARD FEATURES CPU: VIA C 7 1 GHz ; HDD: 40 GB or above; RAM: 25 6 MB DDR 2 upgradeable t o 2 GB m ax. Ethernet Networking: The st andard network port works with both 10 Base T and 100 Base T. Serial Ports: There are 4 serial ports in a PB- 2200 Pro sy stem.
Part 5 i) UPS Battery: 2.3 AH 12V lead acid maintenance f ree battery j) 2-in-1 Cash Dr awer Control Cable: Cable CCBLA-238, when added to the CR por t of the PB seri es, can be used t o control two Posiflex printer dri ve type cash dra wers. k) Cash drawer: Printer (Direct) drive type Po siflex cash drawers.
Part 6 INSTALLATION GUIDES IMPORTANT Please do not connect the power cord or turn on the main unit until you have fully read the inst al la t i on gui des and followe d the instructi o ns !! ! TECHNIC.
Part 7 either in the top cover openi ng operation after pressi ng the 2 springs or by leaving or spilling an y improper materials inside after the opening operation. POWER ADAPTOR The power connect or resides in t he lower left corner of main connect or ar ea.
Part 8 WIRELESS LAN (OPTION) When the wireless LAN option is ordered with the PB system, this option is already in stalled in the delivery insid e the back cable cover with its cable connected to one of the USB port. This cable must be disconnected first if installed whenever th e back cabl e cover is opened for any operation.
Part 9 connection of a normal PS/2 key board or th e Posiflex prog rammable key board could become obligatory by some OS. Ther efore, if there will be no keyboard installed for such OS, it is advisory to use an USB int erface type barcode scanner instead of the PS/2 KB interface type.
Part 10 that comes with the preloaded operating system. Please follow the instructio n from your system integrator f or system / software rest oration. F ollow the instructions below for operating system recovery only if your system integrator does not a dvise other wise.
Part 11 USING THE PB SYSTEM BEFORE POWER ON – A Check List It is very important that you check the following op erational points: Ventilation This terminal must NOT be operated in an environment with restricted ventilation.
Part 12 appears, please replace the use d up UPS battery at power off as soon as possible. Emergency treatment: The battery is construc ted maintena nce free and leakproof. Its storage space in PB system also provides very good protection as long as the ambient temperature remains b elow 30 ° C and the ventilation of the PB system remains free.
Part 13 POWER ON/OFF CONTROL The PB terminal implem ents electr onic power control, such that the main powe r to the syst em may be c ontrolle d by many methods as below: 1. Hardware power sw itch 2. Software OFF command 3. Automa tic power ON c ontrol 4.
Part 14 Emergency Power Off In case of serious system halt due to any reason, t he system could fail to be powered off t hrough normal mean s. Press and hold the Power ON/OFF Switch for Em ergency Powe r Off. Releas e the switch after the system powered off.
Part 15 condition and env ironment temperature, check if the fan is stuck by contaminants such as dry grease or th reads and try to correct the situation when the s ystem is off and coo led down. You may pow er up the system aga in after the system cooled down and troub le cau se removed.
Part 16 It may be requi red to push the power switch down to completely remove the front cover. Cleaning for Front Ventilation Use vacuum cleaner to remove any dust or threads accumulation away from both the ventilation holes on fro nt cover and ventilation grids on chassis expose d after rem oval of the front c over.
Part 17 Cleaning for Side Ventilation Use vacuum cleaner to remove any dust or threads accumulation away from outsides of both ventilation grid s on chassis exposed after removal of the front cover as in pictures below and c lose back the top cover when done.
Part 18.
Part 19.
Part 20 警告使用者 這是甲類的資訊產品， 在居住的環 境中使用時， 可能會造成射頻干 擾，在這種情況下， 使用者會被要 求採取某些適當的對策。 T 3 .
An important point after buying a device Aigo PB2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aigo PB2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aigo PB2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aigo PB2200 you will learn all the available features of the product, as well as information on its operation. The information that you get Aigo PB2200 will certainly help you make a decision on the purchase.
If you already are a holder of Aigo PB2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aigo PB2200.
However, one of the most important roles played by the user manual is to help in solving problems with Aigo PB2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aigo PB2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
