Instruction/ maintenance manual of the product PRO 125 Agri-Fab
Go to page of 12
CAUTION: Read Rules for Safe Operation and Instructions Carefully PRO 125# BROADCAST SPREADER PRINTED IN U.S.A. FORM NO. 47438 (Rev. 2/00) OWNERS MANUAL Model No. 45-02101-101 Assembly Operation Maintenance Repair Parts S H IE L D U P - 8 T O 1 8 F T .
2 T ABLE OF CONTENTS MAINTENANCE & STORAGE............................................9 LUBRICATION..................................................................9 PARTS EXPLOSION.......................................................10 REPAIR PARTS.
3 FULL SIZE HARDW ARE REFERENCE CHART L 1 Spacer Tube, Short (1") M 1 Spacer Tube, Long (1-5/16") N 4 Bracket, Swivel O 1 Link, Flow Control P 2 Bracket, Angle Stop Q 1 Spring, Extension R 1 Knob, Hand S 2 Knob, Plastic 1/4" T 1 Grip, Control Arm U 1 Cap, Vinyl V 2 Grip, Handle REF.
4 TOOLS REQUIRED FOR ASSEMBLY (1) Pliers (2) 7/16" Open End or Box Wrenches (2) 9/16" Open End or Box Wrenches ASSEMBL Y INSTRUCTIONS REMOVAL OF PARTS FROM CARTON Refer to carton contents on page 2 and to the hardware chart on page 3 to lay out and identify parts and hardware needed to assemble the spreader.
5 FIGURE 6 FLOW CONTROL LINK VINYL GRIP FLOW CONTROL ARM 1/4" x 5/8" HEX BOLT SMALL HOLE 1/4" HEX LOCK NUT 14. Assemble the leg stand tube to the handle tube (long) using two 1/4" x 1-1/2" hex bolts and two 1/4" hex lock nuts.
6 21. Hook the free end of the flow control rod through the hole in the slide gate bracket located near the bottom of the hopper. See figure 9. FIGURE 8 FIGURE 7 18. Assemble the flow control arm to the flow control mount- ing bracket using one 1/4" x 5/8" hex bolt and one 1/4" hex lock nut.
7 28. Assemble the spreader shield to the front swivel brack- ets using two 1/4" x 3/4" carriage bolts, 5/16" washers and the two 1/4" plastic knobs. See figure 13. 29. Assemble the spreader shield to the rear swivel brackets using t wo 1/4" x 3/4" hex bolts, four 5/16" washers and tw o 1/4" hex lock nuts.
8 OPERA TION ST ARTING THE SPREADER 1. Pull the flow control arm back against the flow control gauge for the "ON" position. This opens the closure plate in the bottom of the hopper and starts the material flow. See figure 15. 2. Always start the spreader in motion before moving the flow control arm to the on position.
9 IMPORTANT: Application rates (shown on chart) are affected by humidity and mixture content of material (granu- lar and pellet). Minor adjustment of the flow rate setting may be necessary to compensate for these variables. The rate chart is calculated for light and heavy application.
10 REP AIR P ARTS FOR BROADCAST SPREADER MODEL 45-02101-101 1 4 23 23 2 5 6 60 46 10 61 12 19 19 20 21 21 33 26 62 27 36 30 31 49 59 18 35 35 B A D C D 17 14 58 48 55 55 43 44 34 41 42 8 38 38 47 45 3.
11 REP AIR P ARTS FOR BROADCAST SPREADER MODEL 45-02101-101 REF. PART QTY. DESCRIPTION NO. NO. 37 1509-069 12 Bolt, Hex 1/4-20 x 1-3/4" Lg. * 38 43866 2 Bolt, Hex 1/4-20 x 5/8" Lg. Gr. 5* 39 1543-069 11 W asher, Nylon 40 43088 9 Washer, Flat 1/4" Std.
REPAIR PARTS 303 West Raymond Sullivan, IL. 61951 (217) 728-8388 / www.agri-fab.com.
An important point after buying a device Agri-Fab PRO 125 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Agri-Fab PRO 125 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Agri-Fab PRO 125 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Agri-Fab PRO 125 you will learn all the available features of the product, as well as information on its operation. The information that you get Agri-Fab PRO 125 will certainly help you make a decision on the purchase.
If you already are a holder of Agri-Fab PRO 125, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Agri-Fab PRO 125.
However, one of the most important roles played by the user manual is to help in solving problems with Agri-Fab PRO 125. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Agri-Fab PRO 125 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
