Instruction/ maintenance manual of the product DGB-500C Cuisinart
Go to page of 15
Grind & Brew ™ Automatic Coffeemaker DGB-500C Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
1 IMPORT ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1. READ ALL INSTRUCTIONS 2. Do not touch hot surfaces.
W ARNING: RISK OF FIRE OR ELECTRIC SHOCK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock to persons.
3 INTRODUCTION Congratulations. Y ou’ve just purchased a coffeemaker that will make you want to retire your alarm clock! W ake up, instead, to the rich aroma of freshly ground, just brewed coffee, with the Cuisinart ® Grind & Brew ™ Automatic Coffeemaker .
4 THE QUEST FOR THE PERFECT CUP OF COFFEE It is generally agreed that there are four basic elements critical to the perfect cup of coffee: Element 1: W ater Coffee is 98% water . Often overlooked, the quality of the water is as important as the quality of the coffee.
5 FEA TURES AND BENEFITS 1. Reservoir Cover Flips back for easy filling. Removable for easy cleaning. A Safety Interlock System prevents operation of the unit if the Reservoir Cover is open. 2. Reservoir Cover Release Button 3. Showerhead (not shown) Distributes water evenly over coffee, reducing temperature loss as water passes through grounds.
6 13. Grinder Basket Lid Use the recess on each side of the lid to remove lid for easy addition of beans. Note: Lid must be in place for unit to operate. 14. Grinder Basket 15. Charcoal W ater Filter (not shown) Charcoal water filter eliminates chlorine, bad tastes and odours from tap water .
7 Control Panel (Detailed programming instructions are on pages 8 and 9) 1. On/Off/Set Auto-Shutoff Switch with LED Indicator: a. Audible T one (not shown): The Automatic Grind & Brew ™ coffeema.
PROGRAMMING YOUR COFFEEMAKER 1. Setting the Clock When the coffeemaker is plugged in, 12:00 will appear until you set the time. Entering “Time Set” Mode: T o set the time, hold down either the “Hours” or “Minutes” button until the clock begins flashing (about 2 seconds).
9 holding either button will allow you to scroll continuously , slowly at first, and then to accelerate to the rate of about three digits per second. As the desired time setting approaches, release the button and then press repeatedly to advance one digit at a time.
(Use 1 level scoop of whole beans per cup. For 1 or 4 cups, use 1-1/2 level scoops per cup. Maximum capacity is 14 level scoops. Do not over fill or the grinder could malfunction and/or the coffeemaker may overflow . This is our suggested recipe. Adjust the recipe to taste.
than 30 seconds or the coffee may overflow the basket. While we offer this feature, we do not recommend that you pour coffee before the cycle has reached completion, since the coffee brewed at the beginning of the cycle has a flavour profile which is very different from the coffee made at the end of the cycle.
Once clean, reverse the above steps. Remove the carafe from the warming plate. Discard any remaining coffee. The carafe and lid can be washed in warm soapy water and rinsed thoroughly , or placed in a dishwasher . The carafe and carafe lid should be placed on the upper rack only .
13 damages caused by accessories, replacement parts or repair service other than those that have been authorized by Cuisinart. These warranties exclude all incidental or consequential damages.
Discover the complete line of Cuisinart ® brand premier kitchen appliances including food processors, mini food processors, hand mixers, blenders, toasters, coffeemakers, cookware, ice cream makers and toaster ovens at www .
An important point after buying a device Cuisinart DGB-500C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cuisinart DGB-500C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cuisinart DGB-500C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cuisinart DGB-500C you will learn all the available features of the product, as well as information on its operation. The information that you get Cuisinart DGB-500C will certainly help you make a decision on the purchase.
If you already are a holder of Cuisinart DGB-500C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cuisinart DGB-500C.
However, one of the most important roles played by the user manual is to help in solving problems with Cuisinart DGB-500C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cuisinart DGB-500C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
