Instruction/ maintenance manual of the product p772L CTX
Go to page of 20
User's Manual P772L LCD Monitor.
i ♦♦♦ Federal Communications Commission (F.C.C.) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ii ♦♦♦ Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
♦♦♦ 1 English TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2 INTRODUCTION ............................................................................................... 3 Product Description .
♦♦♦ 2 English IMPORTANT SAFETY INSTRUCTIONS Please read the following instructions carefully. This manual should be retained for future reference. 1. To clean the LCD Monitor screen make sure the Monitor is in the power off mode. Unplug the Monitor from its power source before cleaning it.
♦♦♦ 3 English INTRODUCTION LCD Monitor Power Cord Product Description Congratulations on purchasing this new generation monitor. Your LCD monitor incorporates high quality display into a small light-weight module. It has power-saving capabilities and emits no X-ray radiation.
♦♦♦ 4 English Installation of the Monitor Arm CAUTION 1. The Monitor Arm is an optional item. 2. The Arm Mounting Device must be VESA Flat Physical Mounting Interface Standard.
♦♦♦ 5 English INTRODUCTION Recommended Use of the Monitor • Power – Use the type of power indicated on the marking label. • Plugs – Do not remove any of the prongs of the monitor's three-pronged power plug. – Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time.
♦♦♦ 6 English LCD Monitor Base Installation Guide 1 . First attach the back cover to the monitor. Carefully match up the three hinges at the top of the cover with the three corresponding slots; slide and lock into place. 3. Using a flathead screwdriver, insert the screws and tighten in the direction indicated.
♦♦♦ 7 English INTRODUCTION Guidelines for Operating the Viewing Angle of LCD Monitor 1. Height Adjustment You can adjust the height of the monitor by securely holding the base with one hand and pulling up the monitor stand with the other. The height of the monitor can be be adjusted from 383.
♦♦♦ 8 English CONTROLS AND ADJUSTMENTS Once you have installed this monitor with your system, please read the instructions in this section, they give you some guidelines on how to use the monitor more efficiently. And lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference.
♦♦♦ 9 English CONTROLS AND ADJUSTMENTS On Screen Display (OSD) Main menu 1. Press " ↵ ↵ ↵ ↵ ↵ " to open the OSD main menu. 2. Use the " ∇ " and " ∆ " buttons to move through the displayed functions. 3.
♦♦♦ 10 English CONTROLS AND ADJUSTMENTS 2. Auto-Tune Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. ADVANCED AUTO TUNE PATTERN PROGRAM USAGE GUIDE • AUTO_TUNE.exe is used for Windows the display mode adjustment.
♦♦♦ 11 English CONTROLS AND ADJUSTMENTS 3. Color You can choose either the 6500°k, 9300°K color temperature mode, User mode or Motion Picture to store your user defined color settings. • User Mode a. Press " ↵ " button to enter User mode.
♦♦♦ 12 English 4. Image Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. • Clock: Press the " ∇ " or " ∆ " button to adjust the width of the screen. • Phase: Press the " ∇ " or " ∆ " button to reduce the noise on the screen.
♦♦♦ 13 English 6. OSD Setting To adjust the OSD position. • H - Position: Press the " ∇ " or " ∆ " button to reposition the OSD window to the right or left. • V - Position: Press the" ∇ " button to move the OSD window downwards and " ∆ " to move it upwards.
♦♦♦ 14 English CONTROLS AND ADJUSTMENTS Power Consumption (120/230 Vac) Energy Declaration This monitor is equipped with a function for saving energy, which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer.
♦♦♦ 15 English TROUBLESHOOTING Troubleshooting If you are experiencing trouble with the LCD display refer to the following. If the problem persists please contact your local dealer or our service center. The monitor does not respond after you turn on the system.
♦♦♦ 16 English 1 11 5 10 16 6 TECHNICAL INFORMATION Compatibility This LCD monitor supports multiple operating platforms such as IBM compatible computers. This section provides you with detailed information on pin assignment of the D-Sub connector and the preset timing chart of the prevailing video standards.
♦♦♦ 17 English TECHNICAL INFORMATION Specifications Note : Specifications are subject to change without notice LCD Panel 17" TFT LCD module with wide-viewing angle, 0.264 (H)x0.264(V)mm pixel [Monitor] Effective display size 17" (43.2cm diagonal) Resolution (max.
An important point after buying a device CTX p772L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CTX p772L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CTX p772L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CTX p772L you will learn all the available features of the product, as well as information on its operation. The information that you get CTX p772L will certainly help you make a decision on the purchase.
If you already are a holder of CTX p772L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CTX p772L.
However, one of the most important roles played by the user manual is to help in solving problems with CTX p772L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CTX p772L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
