Instruction/ maintenance manual of the product BWC300 Crown Boiler
Go to page of 16
.
.
.
.
3 T able 1.1: Summary of PPs Flex V enting Options VENT OPTION # 9 10 CLASSIFICA TION USED IN THIS MANUAL PPs FLEX (MASONR Y) PPs FLEX (MASONR Y) ILLUSTRA TED IN FIGURE 1.
4 W ARNING Failure to ensur e that the chimney is clean, leak tight, water tight, and structurally sound could r esult in severe corrosion damage to the boiler , damage to the vent system, restriction.
.
.
.
.
.
10 Remove the rope or pull tool from the end of the vent. 6) V erify that the Male Adaptor is undamaged. Lubricate the brown gasket in the female end of the Elbow with a few drops of water 7) and insert the Male Adaptor fully into the Elbow .
.
12 Lubricate the gasket in the female side of the Concentric Adaptor with a few drops of water . Apply a bead of sealant to the 20) Concentric Adaptor fl ange and secure to the Exterior W all Plate using the four #6 stainless steel sheet metal screws provided.
.
PN: 980079 Rev . 0 07/10 Manufacturer of Hydronic Heating Products P .O. Box 14818 3633 I. Street Philadelphia, P A 19134 T el: (215) 535-8900 • Fax: (215) 535-9736 • www .
An important point after buying a device Crown Boiler BWC300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crown Boiler BWC300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crown Boiler BWC300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crown Boiler BWC300 you will learn all the available features of the product, as well as information on its operation. The information that you get Crown Boiler BWC300 will certainly help you make a decision on the purchase.
If you already are a holder of Crown Boiler BWC300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crown Boiler BWC300.
However, one of the most important roles played by the user manual is to help in solving problems with Crown Boiler BWC300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crown Boiler BWC300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
