Instruction/ maintenance manual of the product Z31093 Crivit
Go to page of 10
CYCLE COMPUTER OWNER'S MANUAL ENGLISH FRANÇAIS ESPANOL DEUTSCH ITALIANO ˜ Congratulations on your purchase of the new Vetta C-16 cycle computer. Packed with all the features that a professional rider needs to keep track his workouts, the new C-16 has been redesigned to dramatically improve its reliability when used off-road.
SPEEDOMETER ( ) ( or ) Tells you your instantaneous speed. Accurate to 0.5 mph or kmph. AUTOMATIC RIDE TIME STOPWATCH ( ) Stopwatch activated by wheel movement, turning on when you ride and off when you stop. Records true ride time, time spent actually riding, up to 9:59:59.
ACTIVATE FREEZE FRAME MEMORY In any mode, press the left computer key (B) for approximately 1 second. The entire display will flash indicating that the feature is active.
“A” BUTTON (RIGHT) Controls progressing through functions and settings, and advances the screen while programming the computer. “B” BUTTON (LEFT) Controls advancing through the digits while programming the computer and activating the Freeze Frame memory function.
DETERMINING YOUR PROPER WHEEL SIZE Vetta cycle computers are programmed using the circumference of the wheel measured in millimeters. Note that while your computer can be programmed to +/- 1mm for total accuracy, discrepancies of as much as 50mm or more will not have a significant effect on the accuracy of the unit for most normal rides.
PROGRAMMING YOUR WHEEL SIZE STEP 1 Once you select miles ( ) or kilometers ( ) and press the right key (A), the C-16 will automatically advance into the wheel size setting mode. (See SETTING MILES/HOUR OR KILOMETERS/HOUR) STEP 2 The right hand digit (4) will begin flashing.
MAGNET, SENSOR AND BRACKET INSTALLATION We recommend that you install your C-16 in the following manner, starting with the sensor unit on the fork and working up to the mounting bracket on the handlebar. STEP 1 Mount the new Vetta universal S-2 sensor (pat.
PAGE 15 Clamp the bracket around the handlebars and tighten in place. All Vetta cycle computer brackets are designed to work with 26.0 - 26.4mm standard diameter road handlebars. Shims are provided to fit smaller 25.4mm mountain and road bars. Make sure not to over tighten the bracket as this may result in breakage.
Vetta Sports warrants all Vetta products, to the original purchaser, to be free of defects in materials or workmanship for a period of one year from the original date of purchase. Vetta Sports will, at its sole discretion, repair or replace any product deemed defective.
WARRANTY INFORMATION CARD Name Address Phone/Fax Number Place of Purchase RA Number Date of Purchase Problem.
An important point after buying a device Crivit Z31093 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crivit Z31093 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crivit Z31093 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crivit Z31093 you will learn all the available features of the product, as well as information on its operation. The information that you get Crivit Z31093 will certainly help you make a decision on the purchase.
If you already are a holder of Crivit Z31093, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crivit Z31093.
However, one of the most important roles played by the user manual is to help in solving problems with Crivit Z31093. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crivit Z31093 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
