Instruction/ maintenance manual of the product 92558 Agio International
Go to page of 4
QTY DESCRIPTION ORDER PART # QTY DESCRIPTION ORDER PART # QTY DESCRIPTION ORDER PART # M10 X 55MM BOLT 3 M6 X 50MM BOLT 6 M6 X 16MM BOLT 16 M6 NUT 12 6MM WASHER 6 10MM WASHER 5 12MM W ASHER 4 10MM END.
STEP 4 FRAME ASSEMBL Y Connect right side support frame (Q) and left side support frame (R) using the rear support bar (V). Be sure that the hole in the center of the rear support bar is facing up.
STEP 6 SINK ASSEMBL Y (continued) Position the sink top assembly (Z) over the left side, right side and middle support frames, making sure the holes for the bolts are properly aligned. Once in proper position, use M6 x 16mm bolts (C) to attach sink top/basin assembly to the left support frame.
STEP 8 FINAL TOUCHES Drawer assembly. T ilt the front end of drawer up and slide into track. Make sure track and drawer runners are properly aligned. Slide the two bottom trays (GG) into frame as shown in figure 8 . At this time, make sure all nuts and bolts are tightened completely using wrench and hex key wrench.
An important point after buying a device Agio International 92558 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Agio International 92558 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Agio International 92558 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Agio International 92558 you will learn all the available features of the product, as well as information on its operation. The information that you get Agio International 92558 will certainly help you make a decision on the purchase.
If you already are a holder of Agio International 92558, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Agio International 92558.
However, one of the most important roles played by the user manual is to help in solving problems with Agio International 92558. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Agio International 92558 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
