Instruction/ maintenance manual of the product DM-RMC-100 Crestron electronic
Go to page of 28
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Operations & Installation Guide.
This document was prepared and written by th e Technical Documentation departm ent at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and tradem arks are the property of their respective owners.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Contents DigitalMedia ™ Room Controller: DM-RMC-100 1 Introduc tion ................................................................................................................... ............
.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller DigitalMedia ™ Room Controller: DM-RMC-100 Introduction The DigitalMedia ™ (DM) Room Controller (RMC) is a digital media receiver and display controller desi gned to convert DigitalMedia to regular HDMI.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 DM-RMC-100 in a Classroom Application 2 • DigitalMedia ™ Room Controller: DM-RMC-100 Operations & Installation – DOC.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller For more information on this and ot her DM-RMC-100 applications, refer to the latest revision of the Crestron DigitalMedia ™ Design Guide (Doc. 4789), which is available from the Crestron website ( www.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Physical Description This section provides information on the connections, controls and indicators available on your DM-RMC-100. DM-RMC-100 Overall Dimensions (Front View) 1 2 3 4 5 5.15 in. (13.08 cm) 4.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller DM-RMC-100 Overall Dimensions (Rear View) 12 13 14 Connectors, Controls & Indicators # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 1 PWR LED (1) Green LED indicates operating power supplied via DMNet control network.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Connectors, Controls & Indicators (Continued) # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 3 VIDEO LED (1) Red/green dual color LED i.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Connectors, Controls & Indicators (Continued) # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 8 USB (1) USB Type A female USB 1.1 port for mouse, keyboard, game controller, or other USB HID device.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Connectors, Controls & Indicators (Continued) # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 13 LAN 3 (1) 8-wire RJ-45 female; 10BaseT/100BaseTX Ethernet switch port. 14 DMNet 5, 6 (1) 4-pin 3.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller M Port PIN # SIGNAL DESCRIPTION 1 +5V +5V Power 2 I2C_DATA HDCP & EDID Data 3 E_TX- 10/100BaseT Transmit 6 E_TX+ 10/100BaseT Transmit 4 E_RX- 10/100BaseT Receive 5 E_RX+ 10/100BaseT Receive 7 I2C_CLK HDCP & EDID Clock 8 +5V_RTN +5 Power Return 3.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Industry Compliance This unit has been manufactured to comply with UL’s Standards for Safety in Canada and the United States.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Setup Network Wiring When wiring the DMNet network, consider the following: NOTE: DMNet wiring and Cresnet ® wiring are not compatible. • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 • Metal mounting plate (supplied) • 4-Pin connector plugs (supplied) It is assumed that DigitalMedia cable (DM-CBL) has been fed through an installed two-gang electrical box, 85mm European or 1900 electrical box (not supplied) and wiring has been verified.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Mounting DM-RMC-100 into Electrical Box DM-RMC-100 METAL MOU NTING PLA TE (2019091) DRYWALL MOUNTING SCREWS (4) (2007215) Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Hardware Connections for the DM-RMC-100 (Front View) SENS: CURRENT OR MOTION SENSO R HDMI: DISPLAY HDMI USB: MOUSE, KEYBOARD O R GAME CONTROLLER RE.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Hardware Connections for the DM-RMC-100 (Back View) LAN: ETHERNET EQUIPPED DISPLAY OR OTHER DEVICE DM INPUT DMNet NOTE: Ensure the unit is properly grounded. NOTE: For optimum performance, Crestron strongly recom mends using DM-CBL DigitalMedia ™ cable, available from Cr estron.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Uploading and Upgrading Crestron recommends using the latest program ming software and that each device contains the latest firmwa re to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller Firmware Firmware files may be distributed from programmers to installers or from Crestron to dealers. Firmware upgrad es are available from the Crestron website as new features are develope d after product releases.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller DM-RMC-100 Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION DM LINK LED does not illuminate. Device is not receiving DMNet signal. Verify DMNet is properly attached. PWR LED does not illuminate.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Check Network Wiring Use the Right Wire In order to ensure optimum perform ance over the full range of your installation topology, Crestron Certified Wire and only Crestron Certified Wire may be used.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller NOTE: All Crestron certified DMNet wiring must consist of two twisted pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pair is the A conductor and the B conductor.
DigitalMedia ™ Room Controller Crestron DM-RMC-100 Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise may be returned for credit, exchange or service without prior authorization from CRESTR ON. To obtain warranty service for CRESTR ON products, contact an authorized CRESTRON dealer.
Crestron DM-RMC-100 DigitalMedia ™ Room Controller This page is intention ally left blank. Operations & Installation – DOC. 6743A DigitalMedia ™ Room Controller: DM-RMC-100 • 23.
Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6743A 15 Volvo Drive Rockleigh, NJ 07647 (2022552) Tel: 888.CRESTRON 12.08 Fax: 201.
An important point after buying a device Crestron electronic DM-RMC-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron electronic DM-RMC-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron electronic DM-RMC-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron electronic DM-RMC-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron electronic DM-RMC-100 will certainly help you make a decision on the purchase.
If you already are a holder of Crestron electronic DM-RMC-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron electronic DM-RMC-100.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron electronic DM-RMC-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron electronic DM-RMC-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
