Instruction/ maintenance manual of the product KXB100 Crate
Go to page of 8
KXB100 Keyboard Amplifier User ’ s Guide.
KXB100 Keyboard Amplifier IMPORT ANT SAFETY INSTRUCTIONS • READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND W ARNINGS. • DO NOT OPERA TE NEAR ANY HEA T SOURCE AND DO NOT BLOCK ANY VENTILA TION OPENINGS ON THIS APP ARA TUS.
3 Congratulations! Y ou are now the proud owner of the Crate KXB100 keyboard amplifier . This ver- satile and great sounding amp features a 15” Crate Custom woofer and two LeSon dome tweeters housed in a ported tuned enclosure. Each of the four discreet chan- nels has its own level and reverb/effect control.
3 7 5 4 3 5 4 8 6 2 1 9 3 5 4 9 3 5 4 10 9 17 1. MIC IN: Use this balanced XLR jack to connect a low impedance balanced microphone signal to Channel 1 of the amplifier by means of a shielded microphone cable.
9. INPUT : Use this 1/4” jack to connect a keyboard or other line level signal to the corresponding channel by means of a shielded instrument cable. 10. EQUALIZA TION: Use this five-band graphic equalizer to shape the output of the amplifier to best suit your tastes and to compensate for room acoustics.
KXB100 Keyboard Amplifier 19. PRE AMP OUT : Use this jack to send a high impedance unbalanced signal from the amplifier to another amplifier or recording device by means of a shielded signal cable. 20. POWER AMP IN: Use this jack to connect a line level signal directly into the internal power amp circuit.
KXB100 Keyboard Amplifier 7 LOW HIGH PAT C H B AY REV/ EFF REV/ EFF REV/ EFF REV/ EFF TON ES PEAK SEND PRE AMP OUT PWR AMP IN CHANNEL 1 LINE IN INPUT MIC IN LEVEL REVERB RETURN CROSSOVER POWER AMP W / LIMITER WOOFER TWEETERS CHANNEL 3 RETURN EFFECT RETURN CHANNEL 4 EQUALIZA TION BAL.
KXB100 Keyboard Amplifier KXB100 TECHNICAL SPECIFICA TIONS: Maximum Signal Accepted Ch. 1 High Z: 10 volts peak to peak; Low Z: 15 volts peak to peak Ch.’s 2, 3 and 4: 10 volts peak to peak Input Power Requirements 1 15 V AC, 60Hz, 1 10V A 100/1 10V AC, 50/60Hz, 1 10V A 230V AC, 50/60Hz, 1 10V A Nominal Input Impedance Ch.
An important point after buying a device Crate KXB100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crate KXB100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crate KXB100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crate KXB100 you will learn all the available features of the product, as well as information on its operation. The information that you get Crate KXB100 will certainly help you make a decision on the purchase.
If you already are a holder of Crate KXB100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crate KXB100.
However, one of the most important roles played by the user manual is to help in solving problems with Crate KXB100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crate KXB100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
