Instruction/ maintenance manual of the product SEARS 113.179255 Craftsman
Go to page of 16
f SAVETHIS MANUAL FOR FUTURE REFERENCE 8_8 owner's manual MODEL NO. 113.179255 Serial Number Model and serial num- bers may be found on the handle.
r FULL ONE YEAR WARRANTY ON CRAFTSMAN WET/DRY VACS If this Craftsman Wet/Dry Mac fails due to a defect in material or workmanship within one year from the date of purchase, return it to your nearest Sears Store, and it will be replaced or repaired, at Sears option, free of charge.
• Do not attach screws to drywall only. Make sure screws are attached to studs on 16" centers. • Do not sit or hang on storage rack. • Do not exceed maximum weight limit of 40 pounds. • To reduce the risk of injury from acci- dental starting, unplug power cord before changing or cleaning filter.
Introduction This Clean 'N Carry Vac is intended for household use only. IMPORTANT NOTE Please Read Carefully Static Shocks Are Common - In dry areas or when the relative humidity of the air is low, To reduce the frequency of stat- ic shocks in your home the best remedy is to add moisture to the air with a con- sole humidifier.
Replacement Filter Assembly WARNING: For your own safety, never connect plug to power source outlet until all assembly steps are com- plete and you have read and under- stood the safety and operation instruc- tions. Do not operate vac with any parts damaged or missing.
Storage Rack Assembly & Mounting Assembling Upper and Lower Rack Assembling Accessory Bin to Lower Rack Align the tabs in the upper rack with notches in lower rack. Slide upper rack forward until the center hook on the lower rack engages the bottom flange of the upper rack.
Storage Rack Assembly & Mounting (cont.) -- Mounting Storage Rack to Wail • Do not mount over 5' from the ground. • Do not attach screws to drywall only, Make sure screws are attached to studs on 16" centers. • Do not sit or hang on storage rack.
Clean 'N Carry Vac Assembly Vac Assembly 1, Wind the electdcal cord clockwise (from the rear) around the cord wrap area on back of vac motor assembly. Cord Wrap Cord Area 3. Place vac motor assembly onto vac canister assembly. Vac Motor Assembly 2.
Hanging Vac on Storage Rack 1. Set the vac on the floor near the stor- age rack. Measure the distance from center of storage rack to the closest electrical outlet and add 18 inches. _1 DOutlet_ istance __ Inches 2, Uncoil that amount of power cord from the cord wrap.
Hanging Vac on Storage Rack (continued) Electrical Outlet Retainer Cord Storage When your Clean 'N Carry Wet]Dry Vac is not in use, it should be unplugged from the outlet. Excess cord should be wrapped over the hose storage rack and around the accessory storage bin.
Accessories (continued) Hoses (14' & 7' Pos-I-Lock) The Pos-I-Lock Hose has an adapter that can be used to connect the hose to the female port on the vac or to the male end of another hose.
Operation (continued) Vacuuming Dry Materials 1. The filter must always be in correct position to reduce the risk of leaks and possible damage to the vac. 2. When using your vac to pick up very fine dust, it will be necessary for you to empty the vac canister and clean the filter at more frequent intervals to main- tain peak vac performance.
Maintenance Filter WARNING: To reduce the risk of injury from accidental starting, unplug power cord before changing or clean- ing filter. NOTE: This filter is made of high quality paper designed to stop very small parti- cles of dust. The filter can be used for wet or dry pick up.
Repa Pads 5 Gallon Clean 'N Carry Wet/Dry Vac Model Number 113.179255 Always order by Part Number - Not by Key Number WARNING SERVICING OF DOUBLE-INSULATED CLEAN 'N CARRY VAC In a double-insulated Clean 'N Carry Vac, two systems of insulation are provided instead of grounding.
Repair Parts 5 Gallon Clean 'N Carry Wet/Dry Vac Model Number 113.179255 _27 _4 <_ 34 15.
For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME (1-800-469-4663) Para pedir servicio de reparacion a domicilio - 1-800-676-5811 For the repair or replacement.
An important point after buying a device Craftsman SEARS 113.179255 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman SEARS 113.179255 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman SEARS 113.179255 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman SEARS 113.179255 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman SEARS 113.179255 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman SEARS 113.179255, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman SEARS 113.179255.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman SEARS 113.179255. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman SEARS 113.179255 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
