Instruction/ maintenance manual of the product 917.377582 Craftsman
Go to page of 30
Owner's Manual £RRFTSMRN ° 6.75 HORSEPOWER 22" REAR DISCHARGE POWER PROPELLED ROTARY LAWN MOWER Model No. 917.377582 • Safety • Assembly • Operation • Maintenance • Espa_ol • Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co.
Warranty Safety Rules Assembly Operation Maintenance Schedule Maintenance 2 Product Specifications 11 2 Service and Adjustments 14 4 Storage 16 6 Troubleshooting 17 10 Repair Parts 37 10 Parts Orderin.
• Dress properly. Do not operate mower when barefoot or wearing opensandals. Wear onlysolid shoes with good traction when mowing. • Check fuel tank before starting engine. Do not fill gas tank indoors, when the engine is running or when the engine is hot.
These accessories were available when this lawn mower was produced. They are also avaH_d:)io at most Sears retail outlets and service centers. Most Sears stores can also order i_ir parts for you, when you provide the model number of your lawn mower. Some of these accessories may not apply to your lawn mower.
HOW TO SET UP YOUR LAWN MOWER TO UNFOLD HANDLE IMPORTANT: Unfold handles carefully so as not to pinch or damage control cables. • Raise handles until lower handle section locks into place in mowing position. • Remove protective padding, raise upper handle section into place on lower handles and tighten both handle knobs.
KNOW YOUR LAWN MOWER READ THIS OWNER"S MANUALAND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with yourlawn mowerto familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
The operationofany lawn mower can reeultin foreign objects thrown into the eyes, which can resultin severe eye damage. Always wear safetyglasses or eye shields whileoperating your lawn mower or performing any adjust- ments or _alm. We recommend a wide vision safety mask over spectacles or standard safety glasses.
)RIVE CONTROL Self-propelling is controllid by holding the operator presence control bar down to the handle and pushing the drive control liver forward until it clicks; then release the liver. Forward motion will stop when the operator presence control bar is released.
MOWING TIPS • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time.
.A, ENANCE SCNEOULE FILL IN DATES _ _ _ _ _ REGULAR SERVICE Check for Loose Fasteners (p/ ti/ Clean/Inspect Grass Catcher M Clean Lawn Mower O Clean Under Drive Cover (Power-Propelled Mowers) II / Check ddve belt/pulleys E Power.
PRODUCT SPECIFICATIONS MODEL NUMBER 917.377582 SERIAL NUMBER DATE OF PURCHASE HORSEPOWER: 6.75 DISPLACEMENT: 12.56 CU. IN. _ASOLINE CAPACITY/TYPE: 1.5 QUARTS UNLEADED REGULAR OIL TYPE (API-SF/SG/SH): SAE 30 (ABOVE 32°F) SAE 5W-30 (BELOW 32°F) OIL CAPACITY: 27 OZS.
MPORTANT: Blade bolt is grade 8 heat teated. ro SHARPEN BLADE _IOTE: We do not recommend sharpening )lade - but if you do, be sure the blade is _alanced. 3are should be taken to keep the blade _alanced. An unbalanced blade will cause =.ventual damage to lawn mower or .
TO CHANGE ENGINE OIL NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. • Remove engine oil cap; lay aside on a clean surface.
`&CAUTION: Before performing any service or adjustments: • Release control bar and stop engine. • Make sure the blade and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.
Lower Handle Squeezeto _" F remove_ Hairpin Cotter Handle Bracket TO ASSEMBLE GRASS CATCHER • Insert leg of tubular frame through front opening of grass catcher and thread frame into sewn hem of bag. NOTE: Keep bag hem gathered on the straight leg of the tubular frame.
"nmediately prepare your lawn mower for torage at the end of the season or if the unit ,,ill not be used for30 days or more. .AWN MOWER Vhen lawn mower is to be stored for a period ,f time, clean it thoroughly, remove all dirt, trease, leaves, etc.
OTHER • Do not store gasoline from one season to another. • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • If possible, store your unit indoors and cover it to give protection from dust and dirt.
TROUBLESHOOTING CHART CAUSE PROBLEM Excessive vibration Starter rope hard to pull i Loss of drive (Self-Propelled Mowing) Grass catcher not filling (If so equipped) Hard to push •Wom, bent or loose blade. bolt. • Bent engine crankshaft. • Engine flywheel brake is on when control bar is released.
ROTARY LAWN MOWER - - MODEL NO. 917.377582 GEAR CASE ASSEMBLY PART NUMBER 702511 1 I KEY PART NO. NO. 1 17490416 2 137055X004 3 137053 4 57072 6 48373 7 77881 8 137051 9 137074 DESCRIPTION Tapping Screw 1/4.20 x 1-1/4 Engagement Bracket Shifter Seal Gear Case Halves Kit (Includes Key Nos.
CRAFTSMAN ROTARY LAWN MOWER -- MODEL NO. 917.377582 0o 12 13 27 3O 28.
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NO. 917.377582 KEY PART NO. NO. KEY PART DESCRIPTION NO. NO. DESCRIPTION (D 1 165451X479 2 158152 4 150425 5 66426 6 136376 8 145793 9 151023 10 128415 11 150050 .
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NO. 917.377582 .b. O 14 15 '11 /.
CRAFTSMAN ROTARY LAWN MOWER - - MODEL NO. 917.377582 j=. KEY NO. 1 3 4 5 6 8 9 11 12 13 14 15 16 18 25 26 PART NO. 145755 751152 158755 146527 150495 150182 145212 150340 12000058 137054 88080 88118 67725 701037 152903 143603 KEY PART DESCRIPTION NO. NO.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.996704 301 3OO ! 2g_ _310 12 24O 42 75 42.
CRAFTSMAN 4-CYCLE ENGII_ MODEL NUMBER 143.99670, KEY PART NO. NO. DESCRIPTION 1 36177 2 27652 6 36059 9 590568 10 36002 11 36003A 12 32447 12C 36005A 14 28277 15 36006 16 36008 17 31335 18 651018 19 3.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.996704 I KEY PART NO. NO. ---- 640020A 1 632539 5 632593 6 632541 7 650506 14A 632773 25 632675A 27 632544 28 632543 29 632548 30 632709 32 632672 33 632673 36 640022 37 632547 37A 632547 38 632545 38A 632545 39 632549 40 640021 47 632554 DESCRIPTION Carburetor (Incl.
CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.996704 --S KEY NO. 1 2 3 4 5 6 7 8 11 12 13 PART NO. 590702 590599A 590600 59O696 590601 590697 590698 590699 590700 590703 590535 590701 DESCRIPTION Recoil Starter Spdng Pin (Incl. 4) Washer Retainer Washer Brake Spring Starter Dog Dog Spring Pulley & Rewind Spring Ass'y.
46.
47.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro, 7 days a week 1-800-366-PART {1-800-366-7278) Para ordenar piezas con entrega a domicilio - 1-800-659-70.
An important point after buying a device Craftsman 917.377582 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 917.377582 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 917.377582 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 917.377582 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 917.377582 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 917.377582, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 917.377582.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 917.377582. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 917.377582 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
