Instruction/ maintenance manual of the product 358.74824 Craftsman
Go to page of 11
Instruction Manual J CRRFT$1VlRN°I 12 AMP Motor 220 MPH/360 CFM ELECTRIC BLOWERNACUUM Model No. 358.748240 • Safety • Assembly • Operation • Maintenance • Espar_ol FOR HOUSEHOLD USE ONLY WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Warranty Statement 2 Parts Available 10 Safety Rules 2 Storage 11 Assembly 5 Troubleshooting Table 11 Operation 8 Maintenance 9 Spanish 12 Service & Adjustments 10 Parts Ordering Back Cover FULL T.
ELECTRICAL SAFETY AWARNING: Avoid a dangerous environment. To re- duce the risk of electrical shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs, etc. Do not expose to snow, rain, or water to avoid the possibility of electrical shock.
insulation construction consists of two separate "layers" of electrical insula- tion instead of grounding. Tools and appliances built with a double insulation system are not in- tended tobe grounded. No grounding means is provided on this unit, nor should a means of grounding be add- ed to this unit.
• Never use for spreading chemicals, fertilizers, or any other substances which may contain toxic materials. VACUUM SAFETY • Stop the motor and disconnect the power source before opening the air inlet door or attempting to insert or re- move the vacuum tubes.
2. Push the blower tube onto the blower outlet until itsnaps into place (tube is secured by red tube release button). 3. To remove the blower tube, press the tube release button while pulling on tube.
Elbow Tube Tube Release Button Hole Zipper _1 Opening Opening 3. Close the zipper on the bag. Make sure the zipper is closed complete- ly. 4. Align the grooves on the elbow tube with the grooves on the blower outlet. 5. Push the elbow tube onto the blow- er outlet until it snaps into place (el- bow tube is secured by red tube re- lease button).
MINIMUM WIRE GAUGE RECOMMENDATIONS 100 FT. A.IW4G.* *American Wire Gauge Secure the extension cord to the unit by threading the cord through the cord re- tainer (see illustration). Insert the cord receptacle into the recessed plug. CAUTION: Failure to use cord retain- er could result in damage to the unit, extension cord, or both.
z_ 4rLWARNING: You MUST make sure the tubes are secure before using the unit. _WARNING: Do not use the unit without the tubes or collection bag prop- erly attached to avoid flying debris and/ or impeller contact which can cause se- rious injury.
GENERAL RECOMMENDATIONS The warranty on this unit does not cover items that have been subjected to oper- ator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically toproperly maintain your unit.
dlI_WARNING: Perform the follow- ing steps after each use: • Stop unit and disconnect from the power source. • Allow motor to cool before storing or transporting. • Store unit with all guards in place• Position unit so that any sharp object cannot accidentally cause injury.
An important point after buying a device Craftsman 358.74824 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 358.74824 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 358.74824 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 358.74824 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 358.74824 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 358.74824, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 358.74824.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 358.74824. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 358.74824 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
