Instruction/ maintenance manual of the product 320.48291 Craftsman
Go to page of 16
Owner's Manual °! Palm Grip LASER with Laser Trac ® Model No. 320.48291 CAUTION! Before using this product, read this manual and follow all its Safety Rules and Operating Instructions.
Warranty Page 2 Safety instruction Page 3 Description Page 4 Operation Instructions Page 6 Applications Page 11 Maintenance Page 14 Troubleshooting Page 15 Parts List Page 15 ONE YEAR FUt.
WARNING BE SURE to read and understand all instruction in this manual before using this Laser Level. Failure to follow all instructions may result in hazardous radiation exposure, electric shock, and/or bodily injury.
11o DO NOT leave this tool on unattended_ !2. When using the Magstic adhesive material for mounting the tool to a smooth surface, ALWAYS make sure to place the "tool-side" of the adhesive to the tool first and then position the tool on the wall in the desired location.
NEWI Magstic Non-Marring Adhesive Strips. (see Fig. 2) Magstic is an innovative technology that is washable and reusable.. To use, remove the "RED" tab (Toot Side) and apply the Magstic adhe.
Recommended Use Indoors Laser Diode Type Red Laser Diode 635-665nm Laser Class Class Ilia, Maximum Power Output _ 2,.5 mW Power Supply 2 "AAA" 1,5_Volt Batteries Estimated Battery Life 40 Hours of Continuous Run with Alkaline Batteries Optimum Ope;ating Temperature 30°F to 104°F (-1°C to 40°€) .
3"0 TURN THE TOOL ON/OFF The button to turn the Craftsman Palm Grip Laser Level ON/OFF is located on the top housing of the tool, (See Fig° 1) 1o To turn the Palm Grip Laser Level ON, push the "ON/OFF" button down once. 2,, To turn OFF, push the button down once.
The All-Position Leveling Base (See Fig. 7) "Your Palm Grip Laser Level comes with a spherical base which aliows the level to be finely adjusted to the desired angie when using the base on a surface that is not level or plumb, I l g i g U I II U I il U 1 II 8 I II I Fig.
Using The All-Position Leveling Base To use the All-Position Leveling Base in conjunction with the Patm Grip Laser Level, it is best to place the level on the base for preliminary alignment of the laser line on the wail. 1. Without turning the Laser Level on, place it on the Al_-Position Leveling Base.
Using The Level With A Tripod (Not Included) Because the Palm Grip Laser Level is a "for- ward" projection device, it can be placed on any reasonably level flat surface to draw a plumb vertical line, When used in conjunction with any standard tripod (1/4-20 UNC threaded fitting) versatility is further enhanced (See Fig° 1!).
Referencing And Leveling Across Two Adjacent Surfaces The Palm Grip Laser Level can be used to align a single object or objects on two adjacent walls,, The All-Position Leveling Base has a magnetic bo.
Working With Obstructions And User Interference As discussed, the Palm Grip Laser Level is a forward projection device. The nature of the laser light as it is projected from the level is that of a pla.
Using The Palm Grip Laser Level As A Hand-Held Reference Device (See Fig. 16) With the Laser Level body in the palm of your hand, turn it "ON" being careful not to point it in the direction of anyone's eyes including your own° Note that it projects a horizontal or vertical line "forward" in front of your position.
This Palm Grip Laser Level has been designed to be a low-maintenance tool However, in order to maintain its performance, you must always follow these simple directions° 1, ALWAYS handle the tool with.
Batteries are weak Replace with new batteries The tool is too far Move the too! closer to the target from the target Power button is not Check to make sure the power button The Laser line projection i.
? !:_j:_j:::!:=_i:i_ji _¸ Your Home For expert troubleshooting and home solutions advice: manage home www.managamyhome, com For repair - in your home - of all major brand appliances, lawn and garden .
An important point after buying a device Craftsman 320.48291 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 320.48291 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 320.48291 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 320.48291 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 320.48291 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 320.48291, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 320.48291.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 320.48291. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 320.48291 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
