Instruction/ maintenance manual of the product 315.115042 Craftsman
Go to page of 14
Owner's Manual 7 in. Disc Sander Double Insulated Model No. 315.115042 Save this manual for future reference _ CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co.
• Table of Contents .......................................................................................................................................... 2 • Warranty and Introduction ..........................................................
The purpose of safety symbols is to attract your attention to possible dangers, The safety symbols, and the explanations with them, deserve your careful attention and understanding,The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
• PROTECTYOUR HEARING, Wear haaring protection duringextended periods of operation. • DON'T ABUSE CORD. Never cam/tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges, B SECURE WORK. Use clamps or a vise to hold work.
WARNING: Always wear safety goggles or safety glasses with side shieldswhen operating your sander. Failure to do so could result in dust, shavings, loose particles or foraign objects being thrown into your eyes, causing possible serious injury. KNOW YOUR SANDER See Figure 1.
_, WARNING: Your sander should never be connected to power supply when you are assembling parts, making adjustments, cleaning, or when not in use. Disconnecting sender will prevert accidental starting that could cause sedous personal injury. AUXILIARY HANDLE See Figure 2.
SWITCH An important new feature of your sander is the switch design. It has multi-finger control for use when operatingat differentangles or sanding positionsand to help reduce fatigue. It also has a lock-on feature in the switch for added utility and convenience on extended work requirements.
INSTALLING SANDING DISC • Disconnect sanderfrom power supply, • Assemble parts as shown in Figure 9. • Place washer on spindle,then thread rubber back-up pad onto spindle.Lock spindle by depressing spindle lock buttonand hand tighten beck-up pad.
For ease of operation and maintaining proper control, hold your sander only by the handles provided. Also, as men- tioned previously, hold it firmly with both hands at all times. Never grasp the front or sides of the tool body, or by any other means during use.
_. WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Only the parts shown on parts list, page 13. are intended to be repaired or replaced by the customer.
i I i i i i I i i.
CRAFTSMAN DISC SANDER- MODEL NUMBER 315.115042 I I 8 1 I I 11 2 SEE NOTE "A" PAGE 13 OPTIONAL HANDLE ASSEMBLY 3 13 Page12.
CRAFTSMAN DISC SANDER - MODEL NUMBER 315.115042 , i1 I he model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your | CRAFTSMAN DISC SANDER or when orderieg repair parts. J PARTS LIST KEY PART NO.
® Registered Ttadem_k I TM Trademark of Sears, ROebuCk and Co. © Sears,Roebud_ and Co. ® Merca Re_lrada / Metca de F_dca de Se=rs,Roeb ud_ _q d Co..
An important point after buying a device Craftsman 315.115042 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.115042 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.115042 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.115042 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.115042 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.115042, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.115042.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.115042. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.115042 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
