Instruction/ maintenance manual of the product 315.115032 Craftsman
Go to page of 14
Operator's Manual tI:RRFTSMRN'I 6 in. Electric SanderlPolisher Double Insulated Model No. 315.115032 Save this manual for future reference. CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.
• Table of Contents / Warranty / Introduction ....................................................................................................... 2 • General Safety Rules ........................................................................
WARNING: Read and understand all instruc- tions, Failure to follow all instructions listed below may result in eiectdc shock, fire and/or sedous personal injury. SAVE THESE INSTRUCTIONS Work Area • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Service • Tool service must be performed only by quali- fied repair personnel, Service or maintenance performed by unqualifiedpersonnel could result in a risk of injury. • When servicing a tool, use only identical re. placement parts, Follow instructions in the Maintenance section of this manual.
SYM BOL NAM E DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of current W Watts Power no No Load Speed Rotational speed, at no load ] Class II Construction Designates Double insulated Construction Tools .
Size of Sanding Disc Size of Polishing Sonnet Horsepower 6 inches Rating 120 volts, 60 Hz, AC only, 4.5 amps. 6 inches Spindle Size 1/2 inch 20 TPI 1/2 No Load Speed 1,400/min. & 1650/min. WARNING: Always wear safety goggles or safety glasses with side shields when operating your sandedpolisher.
_i WARNING: Your sander/polishershould never be connected to power supplywhen you are assembling parts, making adjustments, assembling or replacing sanding discs or bonnets, cleaning, or when not in use, Disconnecting sander/polisher will prevent accidental starting that could cause serious personal injury.
SANDING DISC SELECTION Selecting the correct size grit and type sanding disc is an extremely important step in achieving a high quality sanded finish. Aluminum oxide, silicon carbide, and other synthetic abrasives are best for power sanding. Natural abrasives, such as flint and garnet are too soft for economical use in power sanding.
PREPARING FOR OPERATION For ease of operation, this tool has a front aL_iliary handle and mar handle. See Ffgure 1. This provides for two-hand operation, which is necessary in order to maintain proper control and keep both hands clear of the sanding disc and sanding area, When operating your sander/polisher, always use both hands.
_1= WARNING: Do not wear loose clothing or jewelry when operating this tool, They could get caught in moving parts causing sehous injury. Keep head away from sender/polisher and sanding or polishing area. Hair could be drawn into sender/polisher causing serious injury, INSTALLING POLISHING BONNETS See Figure 6.
DOUBLE INSULATION is a safety concept in electric power tools, which eliminates the need for the usual three wire grounded power cord and grounded supply system. Wherever there is electric current in the tool there are two complete sets of insulation to protect the user.
CRAFTSMAN SANDER/POLISHER - MODEL NUMBER 3t5.115032 SEE NOTE "A", Page 13 6 4 12.
CRAFTSMAN SANDER/POLISHER - MODEL NUMBER 315.115032 _-- I The model number will ba found on a plate attached to the motor housing. Always mention the model 1 number in all correspondence regarding your CRAFTSMAN SANDER/POLISHER or when ordering I repair parts.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Craftsman 315.115032 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.115032 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.115032 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.115032 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.115032 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.115032, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.115032.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.115032. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.115032 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
