Instruction/ maintenance manual of the product 315.11401 Craftsman
Go to page of 16
Operator's Manual 19.2 VOLT NAILER/STAPLER Model No. 315.114010 Save this manual for future reference • Safety • Features • Operation • Maintenance • Parts List WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
• General Safety Rules ................................................................................................................................................. 3-4 • Specific Safety Rules ..................................................
_hj WARNING: Read and understand all instruc- tions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance section of this manual.
_ WARNING: Never use a battery thathas been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately.
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SPECIFICATIONS Motor .................................................................................................................................................................. 19.2 Volt DC Switch ...............................................
HANDLE LOCK OFF SWITCH BATTERY PACK SHOWNINTOOL BATTERY PACK TACKING SWITCH SHOWN IN CHARGER MOUTH TRIGGER 4-1/2 in, CHARGER REDLED ON INDICATES GREENLEDON AFTERFAST CHARGING CYCLE, INDICATES FULLYCHARGED BATTERY PACK AND IN TRICKLE CHARGE MODE, YELLOW AND GREENLEDS ON INDICATES DEEPLY DISCHARGED OR DEFECTIVE BATTERY PACK.
INSTRUCTIONS When unpacking the tool: • Carefully remove the tool and accessories from the box. • Make sure that all items listed in the packing list are in- cluded. • Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
_)k WARNING: Do not allow familiarity with this tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. BATTERY PACK The battery pack for your toot has been shipped in a low charge condition to prevent possible problems.
TO INSTALL BATTERY PACK • Place battery pack in your tool. Align raised rib on battery pack with groove inside toot. See Figure 2. • Make sure the latches on each side of your battery pack snap in place and battery pack is secured in toot before beginning operation.
NAILS / Fig. 5 APPLICATIONS • This Nailer/Stapler is designed for light duty stapling or nailing into wood. TO STAPLE See Figure 6. • Hold handle firmly with tack mouth flat to workpiece forming a 90 ° angle; depress the lock-off button and pull switch trigger to drive staple.
_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
.
CRAFTSMAN 19.2 VOLT CORDLESS NAILER/STAPLER - MODEL NO. 315.114010 l The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 19.2 VOLT CORDLESS NAILER/STAPLER or when ordering repair | parts.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
An important point after buying a device Craftsman 315.11401 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 315.11401 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 315.11401 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 315.11401 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 315.11401 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 315.11401, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 315.11401.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 315.11401. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 315.11401 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
