Instruction/ maintenance manual of the product 172.10721 Craftsman
Go to page of 10
Model No. 172.107210 Owner's Manual 7-in. Buffer / Polisher ® • W ARRANTY • SAFETY • UNP ACKING • DESCRIPTION • OPERA TION • MAINTENANCE • ACCESSORIES CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product.
3 SAFETY SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger .
5 SAFETY INSTRUCTIONS cont. 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Do not use the power tool if the switch does not turn it on and off.
7 SAFETY INSTRUCTIONS cont. SERVICE SAFETY 1. If any part of this tool is missing or should break, bend, or fail in any way; or should any electrical component fail to perform properly: SHUT OFF the power switch and remove the tool’s plug from the power source and have the missing, damaged or failed parts replaced BEFORE resuming operation.
8 SAFETY INSTRUCTIONS cont. SAFETY RULES FOR BUFFER / POLISHERS cont. 6. T o avoid splashing wax, AL W A YS start and stop the buffer / polisher on or against the surface to be polished. 7. After plugging in extension cord, loop extension cord over tool’s stub length plug.
1 1 Y our Craftsman buffer / polisher has a precision-built electric motor and it should be connected to a 120-volt, 60-Hz AC ONL Y power supply (normal household current). DO NOT operate on direct current (DC). The large voltage drop will cause a loss of power and the motor will overheat.
12 KNOW YOUR BUFFER / POLISHER cont. Before attempting to use your tool, familiarize yourself with all of the operating features and safety requirements. DESCRIPTION cont. OPERA TION Fig. 2 Stub Lengh Cord On/Off Slide Switch Perimeter Handle System Foam Pad Base PRODUCT SPECIFICA TIONS Pad Diameter 7-in.
14 OPERA TION cont. RUNNING YOUR BUFFER / POLISHER AND W AXING VEHICLE 1. After plugging tool into extension cord, loop extension cord over tool’s stub length plug.
17 ACCESSORIES Sears and other Craftsman ® outlets offer a large selection of Craftsman buffer / polisher accessories designed for all your buffing and polishing applications. Look for these Craftsman accessories. They are specially designed to make your 7-in.
P ARTS LIST The model number will be found on the nameplate of the buffer/polisher . Always mention the model number in all correspondence regarding your tool.
An important point after buying a device Craftsman 172.10721 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 172.10721 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 172.10721 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 172.10721 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 172.10721 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 172.10721, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 172.10721.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 172.10721. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 172.10721 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center