Instruction/ maintenance manual of the product 152.22018 Craftsman
Go to page of 19
Owner ’ s Manual 8-in. Wheel 3/4 Horsepower (continuous duty) 3450 R.P .M. (no load speed) 8-in. BENCH GRINDER Model No. 152.220180 Sears, Roebuck and Co.
2 T ABLE OF CONTENTS W ARRANTY PRODUCT SPECIFICA TIONS S ECTION P AGE W arranty ..........................................................................................................................................................................2 P roduct Specifications .
3 SAFETY INSTRUCTIONS GENERAL SAFETY INSTRUCTIONS Operating a Bench Grinder can be dangerous if safety and common sense are ignored. The operator must be familiar with the operation of the tool. Read this manual to understand this Bench Grinder . DO NOT operate this Bench Grinder if you do not fully understand the limita- tions of this tool.
4 MINIMUM RECOMMENDED GAUGE FOR EXTENSION CORDS (A WG) 120 VOL T OPERA TION ONL Y 25’ LONG 50’ LONG 100’ LONG 150’ LONG 0 to 6 Amps 18 A WG 16 A WG 16 A WG 14 AWG 6 to 10 Amps 18 A WG 16 AWG 14 A WG 12 AWG 10 to 12 Amps 16 A WG 16 AWG 14 A WG 12 AWG 2 6.
5 GROUNDING INSTRUCTIONS I N THE EVENT OF A MALFUNCTION OR BREAK- DOWN , grounding provides the path of least resistance for electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that h as an equipment grounding conductor and a ground- ing plug.
6 3. THE DIAMETER OF THE GRINDING WHEELS W ILL DECREASE WITH USE . Adjust the tool rests and spark arrestors to maintain a distance of 1/16” from the wheel. 4. DO NOT ST AND IN FRONT OF THE BENCH G RINDER WHEN ST ARTING IT . Stand to one side of the Bench Grinder and turn it “ON”.
7 CART ON CONTENTS UNP ACKING AND CHECKING CONTENTS (Fig. C) T his Bench Grinder will require a minimal amount of assembly . A 10mm and 13mm open end wrench is provided for mounting the T ool Rest Assemblies and the Spark Arrestor Assemblies. Remove all of the parts from the shipping box and lay them on a clean work surface.
8 KNOW YOUR BENCH GRINDER 1. WHEEL GUARD - Covers the grinding wheels and protects against accidental contact. 2. WHEEL COVER - Covers the grinding wheels and provides access for routine maintenance. 3. MOTOR HOUSING - Contains the electrical motor . 4.
9 ASSEMBL Y INSTRUCTIONS A 10mm and 13mm open-end wrench (included) is required for assembly of the T ool Rest Assemblies and the Spark Arrestor Assemblies. • DO NOT assemble the Bench Grinder until you are sure the tool IS NOT plugged in. • DO NOT assemble the Bench Grinder until you are sure the power switch is in the “OFF” position.
10 WORK LIGHT (Fig. H) The Bench Grinder is provided with a Flexible Work Light to assist in visibility of the workpiece. The Bench Grinder is NOT provided with a light bulb for t he Flexible Work Light. T o reduce the risk of fire, use a 120V , 40 watt T ype A or smaller bulb , medium base.
11 OPERA TING THE BENCH GRINDER The Bench Grinder is designed for hand held grinding, s harpening, and cleaning operations. A L W A YS WEAR EYE PROTECTION! H ot sparks are produced during grinding operations. 1. The Power Switch must be in the “OFF” position.
12 CHANGING THE GRINDING WHEEL (Fig. K) Due to normal wear , both wheels will need to be replaced occasionally . See Fig. K. 1. T urn the power switch “OFF” and unplug the power cord from its power source 2. Rotate the eyeshields to the “UP” position for access to the tool rests.
13 MAINTENANCE OF THE BENCH GRINDER T urn the power switch “OFF” and unplug the power cord from its power source prior to any maintenance. LUBRICA TION The Bench Grinder has sealed lubricated bearings in the motor housing that do not require any additional lubrication from the operator .
14 P ARTS K EY P ART N O. NO. DESCRIPTION QTY . 1 OR90055 M6x80mm CARRIAGE HD SCREW 1 2 OR90152 EYESHIELD 1 3 OR90059 M6mm FLA T W ASHER 1 4 OR90001 M6mm KNOB 1 5 OR90002 SP ACER 1 6 OR90488 SP ARK ARRESTOR-L.
15 8-IN. PROFESSIONAL BENCH GRINDER P ARTS LIST MODEL NO. 152.220180.
16 P ARTS K EY P ART N O. NO. DESCRIPTION QTY . 1 OR90055 M6x80mm CARRIAGE HD SCREW 1 2 OR90152 EYESHIELD 1 3 OR90059 M6mm FLA T W ASHER 1 4 OR90001 M6mm KNOB 1 5 OR90002 SP ACER 1 6 OR90488 SP ARK ARRESTOR-L.
17 10-IN. PROFESSIONAL BENCH GRINDER P ARTS LIST MODEL NO. 152.220600.
18.
® Registered Trademark / TM Tr ademark / SM Service Mark of Sear s Brands, L LC ® Marca Reg ist rada / TM Marc a de Fáb rica / SM Marca de Ser v i c io de Se ars Brands, LLC MC Ma rque de c ommerc .
An important point after buying a device Craftsman 152.22018 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 152.22018 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 152.22018 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 152.22018 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 152.22018 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 152.22018, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 152.22018.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 152.22018. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 152.22018 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center