Instruction/ maintenance manual of the product 240SE Coustic
Go to page of 11
Owner’ s Man ual fo r 240SE, 400SE, & 600SE T wo Channel P ower Amplifiers www .coustic.com.
Welcome … to the Coustic world of power and clarity . The new 240/400/600SE amplifiers deliver the clean- est music you’ve ever heard at any power level in the 12-volt environment. Besides their sleek contoured design, the 240/400/600SE amplifiers have all the latest and most sophisticated audio features.
CONTROLS, INDICA T ORS, AND TERMINALS FRONT P ANEL Figure 1: Front P anel T er minals and Controls 1. FIL TER MODE SELECT SWITCH (MODE) "HPF": Slide switch to this position if the amplifier is used as a mid/tweeter amplifier . "OFF": Slide switch to this position if the amplifier is used as a full-range amplifier .
SYSTEM CONFIGURA TION By purchasing the 240/400/600SE power amplifiers, you are already one step closer to experi- encing the purest and most natural sound quality in the automobile environment.
INST ALLA TION Caution: Please follow all the installation recommendation and instructions in this manual. Installing and/or using the amplifier in methods other than those outlined herein may reduce the performance capability of the amplifier . Any such installation or usage renders the product war- ranty v oid.
Connect the Amplifier to the Speakers. Use thicker speaker wires (e.g. 8 - 10 gauge desirable) for these connections. For Stereo Mode 1. Connect the left negative ("–") speaker output of the amplifier to the negative terminal of the left speaker .
FINAL SYSTEM CHECK INPUT SENSITIVITY ADJUSTMENT The Input Sensitivity Control is located on the Front Panel. The objective of input sensitivity adjustment is to match the output of the source unit with the input of the amplifier . The output voltage of individual source units can vary .
Figure 12: T wo (2) amplifier system Figure 13: 3-Channel system with one stereo amplifier 14 15 www .coustic.com 23 14 5 6 LOUD CD-328 – + LOUD MUTE ASM MONO DISP WB P.
TROUBLE-SHOO TING SECTION SYMPT OM PROB ABLE CAUSE 1 No power Check connections to the amplifier's Ground, B+ & Remote terminals. Check connection at "+" terminal of the battery . Check the remote turn-on terminal. Ensure it receives power when the source is turned on (or when the switch is turned on).
SPECIFICA TIONS: 240SE 400SE 600SE Rated Power @ 14.4 V (0.1 % THD): 2 x 60 W atts 2 x 100 W atts 2 x 150 W atts 4 Ohm Stereo Rated Power @ 14.4 V (0.1 % THD): 2 x 120 W atts 2 x 200 W atts 2 x 300 W atts 2 Ohm Stereo Rated Power @ 14.
7676 S. 46th St. Suite 2020 Phoenix, AZ 85040 TEL: (602) 438-2020 F AX: (602) 438-7313 A Division of Mitek Corporation Copyright © 2000 • All Rights Reserved www .
An important point after buying a device Coustic 240SE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coustic 240SE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coustic 240SE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coustic 240SE you will learn all the available features of the product, as well as information on its operation. The information that you get Coustic 240SE will certainly help you make a decision on the purchase.
If you already are a holder of Coustic 240SE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coustic 240SE.
However, one of the most important roles played by the user manual is to help in solving problems with Coustic 240SE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coustic 240SE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
