Instruction/ maintenance manual of the product HD Contour
Go to page of 20
Contour HD W earable Camcorder Product Guide.
.
1 a b c d f e SD HD or g h i j k l About the Camera a Power Button b Battery Status c Record Button d Rotating Lens e Record Status f Memory Status g HD/SD Switch h USB i Charge Indicator j Battery La.
2 Getting Ready Open the back door . s Insert battery with (+) s aligned and close latch. Align back door slightly s above camera and slide down until it locks in. Power Up Push power button. s Camera beeps and lights turn off. s Y ou are ready to record.
3 Record Start: slide switch forward. s Stop: slide switch back. s Congrats, your fi rst video! s Share Install Easy Edit Software s directly from MicroSD card provided or download at: www .VholdR.com/support/ software. Connect camera to computer s with USB cable.
4 Memory 2GB microdSD card included. Accepts up to 16GB microSD (SDHC s Compatible). Note: Always power off before ejecting card. Use switch under back door to select video resolution. s HD: Amazing clarity 1280 x 720 at 30fps 30 min avg record time/GB Wide angle lens: 135 deg.
5 Status Press power button to check status. Memory / Battery Available s Green > 80% Y ellow 20-80% Red < 20% Error Conditions T ime invalid: Memory/battery fl ash red at power on. s Memory full: (3) beeps, recording stops. s Memory corrupt: (3) beeps, shuts off.
6 Flat Surface Mount Unhook leash on base and loop s through camera. Slide camera onto rails until s completely forward. Adhere mount to fl at s surface (top or side of helmet recommended). Hold base, pull camera s away , rotate to align, and press into mount to reattach.
7 Goggle Mount Slide camera on rails until completely forward. s Press thumb on large tab (top of mount) s and pull camera away . Slide goggle s strap into base. Align vertical s angle of camera. Snap rails back s into mount over strap.
8 Align Press power button to activate lasers. • Aim at your hand, a wall, or other object. • Rotate lens to align lasers horizontally . • Remove and reorient mount rails to adjust mount • angle. Aim a little high for the best shot. Manual_and Info_2009_Proof4.
9 We want to help you have a great Contour HD 1080p experience so please contact us with any questions you have. Hours: Monday – Friday (9am to 6pm PST) T oll Free: 866.397.6920 (USA) International: 206.792.5226 Email: support@vholdr .com Web: www .
10 Cautions and Warranty This Important Product Information Guide contains regulatory , safety , handling, disposal and recycling information, as well as the 180-day limited warranty for your Contour HD Camera. Read all safety information below and operating instructions before using ContourHD Camera to avoid injury .
11 Contour HD uses a rechargeable lithium-ion, 3.7V , 1050mAh battery . Do not use batteries other than those specifi cally designed for the Contour HD . Use of any other battery may invalidate the warranty provided by T wenty20, Inc. and may present a risk of fi re or explosion.
12 FCC Information Contour HD Wearable Camcorder Model: 1200 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
13 television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. s Increase separation between equipment and receiver .
14 Laser notice Contour HD is a Class II laser device. Laser radiation is emitted from the Contour HD when using the lasers for alignment. Please use caution and do not stare directly into the beam or point at others. Repairing or modifying Never attempt to repair or modify Contour HD Camera yourself.
15 TWENTY20, INC. LIMITED WARRANTY T wenty20, Inc. (“Manufacturer”) warrants to the original end user (“Purchaser”) that for the 180 days (“Warranty Period”), the Contour HD Wearable Camco.
16 to Manufacturer for service), and assumes no liability for such loss. Purchaser assumes all liability , and as such releases Manufacturer from any liability , for any accident, injury , damage, dea.
17 TO THE EXTENT NOT PROHIBITED BY LAW , IN NO EVENT WILL MANUF ACTURER BE LIABLE FOR ANY LOST DA T A, REVENUE OR PROFIT , OR FOR SPECIAL, INDIRECT , CONSEQUENTIAL, INCIDENT AL OR PUNITIVE DAMAGES, HO.
All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders. Contour HD is a product of T wenty20 Corporation in Seattle Washington www .vholdr .com ©2009 T wenty20 Corporation. All rights reserved.
An important point after buying a device Contour ContourHD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Contour ContourHD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Contour ContourHD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Contour ContourHD you will learn all the available features of the product, as well as information on its operation. The information that you get Contour ContourHD will certainly help you make a decision on the purchase.
If you already are a holder of Contour ContourHD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Contour ContourHD.
However, one of the most important roles played by the user manual is to help in solving problems with Contour ContourHD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Contour ContourHD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center