Instruction/ maintenance manual of the product MOD HUB series Contemporary Control Systems
Go to page of 8
MOD HUB series A Line of Modular Active Hubs for ARCNET ® Local Area Networks Expansion Modules Installation Instructions #TD471 100-0II.
T rademarks Contemporary Controls, ARC Control, ARC DETECT and EXTEND-A-BUS are trademarks or registered trademarks of Contemporary Control Systems, Inc. ARCNET is a registered trademark of Datapoint Corporation. Other product names may be trademarks or registered trademarks of their respective companies.
INTRODUCTION This document provides instructions for installing and removing expansion modules to be used in the MOD HUB series of modular ARCNET active hubs. More detailed information regarding the MOD HUB Series can be obtained by referring to Contemporary Controls’ MOD HUB Series User Manua l .
Model Number Description EXP-CXS 4-port coaxial star expansion module EXP-CXS/FG3-ST Coax/1300 nm fiber expansion module EXP-CXS/FOG-SMA 2-port coax/fiber SMA expansion module EXP-CXS/FOG-ST 2-port co.
REMOVING MODULES FROM THE MOD HUB Before removing the modules from the MOD HUB, turn the unit off by depressing the power switch located on the front panel of the MOD HUB. Unplug the power cord from the wall outlet. Disconnect the cables from the connectors on the module that is being removed.
T ighten the captive screws on the module panel with your fingers and fasten them in the locking position. Attach the cables running from each device in the ARCNET LAN to the appropriate module connectors on the newly- installed expansion module. Refer to the MOD HUB Series User Manua l , Chapter 2, to test the module for proper working operation.
APPENDICES Appendix A–Declaration of Conformity Applied Council Directives: Low V oltage Directive 72/23/EEC Council Directive as amended by Council Directive 93/68/EEC Electromagnetic Compatibility.
T ype of Equipment: Industrial local area network modular hub and associated expansion modules * Y es — product is certified to this directive N/R — this directive is not required for this product.
An important point after buying a device Contemporary Control Systems MOD HUB series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Contemporary Control Systems MOD HUB series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Contemporary Control Systems MOD HUB series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Contemporary Control Systems MOD HUB series you will learn all the available features of the product, as well as information on its operation. The information that you get Contemporary Control Systems MOD HUB series will certainly help you make a decision on the purchase.
If you already are a holder of Contemporary Control Systems MOD HUB series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Contemporary Control Systems MOD HUB series.
However, one of the most important roles played by the user manual is to help in solving problems with Contemporary Control Systems MOD HUB series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Contemporary Control Systems MOD HUB series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
