Instruction/ maintenance manual of the product SL218 ConnectPRO
Go to page of 11
KVM Switch 1 Table of Contents StreamLine KVM Switches n Introduction Overview……………………………………..………….…….……2 Features…………………………………..….……………….....…2 Configurations………………….
KVM Switch 3 n Hot - key functions allow easy computer access n Keyboard states automatically saved and restored when switching comp uters n Operating system independent, transparent to all applicatio.
KVM Switch 5 Figure 2 : A cascade StreamLine configuration Throughout this manual, Master is the StreamLine KVM switch that connects directly to the drawer. Sla ve is a StreamLine KVM switch that has its CONSOLE port connected to a Master's “ PC x” port.
KVM Switch 7 The connectors (keyboard, mouse and monitor) at the Local port on the rear of the KVM module are not applicable wh en the module is connected to the drawer by the C - 36 connector. When its C - 36 connector is not connected to the drawer, the KVM module acts as a rear - mount stand - alone KVM switch.
KVM Switch 9 T he port number of the curren tly selected computer is displayed in red, same as the front indicator, at the right corner of the OSD menu . The color of a device name is green if it has power and is ready for operation , or the color is white as it has no power.
KVM Switch 11 (<F4>:More Scan Type) determines i f scanned computers must also be eye mark selected. Scan Rate (<F4>:More Scan Rate) sets the display interval when a computer is selected before selecting the next one. n Manual Scan Scan through power - on computers one by one by keyboard control.
KVM Switch 13 Hot - key commands Ho t - k ey command is a short keyboard sequence to select a computer, to activate computer scan, etc. StreamLine interprets keystrokes for hot - keys all the time. A hot - key sequence starts with two left <CTRL> keystrokes followed by one or two more keystrokes.
KVM Switch 15 g Audio Stick An optional multimedia module can be LINKed to the back of each StreamLine for selecting microphone and stereo speaker signals. There are two options for Audio Stick : ON and Of f . When set to ' On ', audio selection follows computer selection.
KVM Switch 17 Change Configuratio n while Running A d evice (a computer or a KVM switch) at any ' PC x' port can be changed at any time after initial power - up.
KVM Switch 19 Troubleshooting : Ensure that all cables are well seated. Check that keyboard/mouse cables are not swapped. Label and bundle the cables for each computer to avoid confusion when connected to the StreamLine .
KVM Switch 21 check if Master recognizes the slave connection. Look for triangle mark and the number before it. The StreamLine fails to function occasionally. Computers do not supply enough power. Make sure a power adapter with minimum of 9V 500mA output rating is firmly connected to the power jack.
An important point after buying a device ConnectPRO SL218 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ConnectPRO SL218 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ConnectPRO SL218 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ConnectPRO SL218 you will learn all the available features of the product, as well as information on its operation. The information that you get ConnectPRO SL218 will certainly help you make a decision on the purchase.
If you already are a holder of ConnectPRO SL218, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ConnectPRO SL218.
However, one of the most important roles played by the user manual is to help in solving problems with ConnectPRO SL218. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ConnectPRO SL218 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
