Instruction/ maintenance manual of the product CTIM-00043 Connect Tech
Go to page of 25
USER MANUAL CANpr o/104 CTIM-00043 (0.02) - January 15, 2010.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 2 800 -426-8979 | 519 -836-1291 Table of Conten ts Copyright Notice ................................................................................................................
CANpro/104 User Manual 3 www.connecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 J3A ................................................................................................................................................
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 4 800 -426-8979 | 519 -836-1291 Copyright Not ice The information contained in this document is subj ect to change without notice.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 5 800 -426-8979 | 519 -836-1291 Introduction CANpro/104 combines the power of two independent NXP SJA100 0 CAN controllers with the compact size and rugged stability of PC/10 4.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 6 800 -426-8979 | 519 -836-1291 Hardware Inst allation – Rev C & Later The Connect Tech CA Npro/10 4 board pr ovides two (2) industry standard SJA1000 C AN Bus controllers i n a PC/104 boar d format which supports bo th I/O and Memory mapping configurability.
CANpro/104 User Manual 7 www.connecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 I/O Space This region is supported by all PC/104 CPU System board vendors, and co mmonly consists of I/O Addresses fro m 0x000 to 0x3FF, although so me Syste m boards support I /O addresses b eyond 0x3FF.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 8 800 -426-8979 | 519 -836-1291 Secondly, the Me mory Spac e ca n be enabled by Applicatio n o r Driver soft ware, after the Operating system has started.
CANpro/104 User Manual 9 www.connecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 1. X = Address bit is ignored (and the correspo nding Jumper is Not Used ). 2. When Memory Space is selec ted, P C/104 Address bits 20 and 2 1 are alway s decoded as logical “0” .
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 10 800 -426-8979 | 519 -836-1291 PeliCAN vs BasicCAN Addressing Modes The SJA1000 can operate in 2 different modes, t he PeliCAN .
CANpro/104 User Manual 11 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 Example #2: Memory Address 0x0C800 0 (this address is belo w the 1-Me g boundary) 0x0C8000 = 0000.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 12 800 -426-8979 | 519 -836-1291 CAN Controller Addressing Table Once the Base Memor y or I/O Address is setup, t he 2 SJA1000 CAN controllers are accessed at the following address offsets.
CANpro/104 User Manual 13 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 Common Memory Space Address Selections Most System boards allo w the PC/104 Bus stack to be al.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 14 800 -426-8979 | 519 -836-1291 Performance E nhancement PC/104 Memory and I/O Bus cycles are typicall y about 700 nS long in total, but the access spee d of the SJA1000 is considerab ly faster.
CANpro/104 User Manual 15 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 Single Interrupt Mode This mode routes the interrupt signal from both SJ A1000 CAN co ntrollers to one PC/10 4 Bus Interrupt signal.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 16 800 -426-8979 | 519 -836-1291 Security ID Feature Some users may wis h to assoc iate the operation of their software with a particular hard ware installation.
CANpro/104 User Manual 17 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 J3B Position Function Jumper Installed Jumper Removed 1 Mem Addr[16] or I/O Addr[9] = 1 Mem Ad.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 18 800 -426-8979 | 519 -836-1291 Hardware Insta llation – Rev A & B Before you begin, take a minute to ensure that your package includes the req uired components that s hould have shipped with your CANpro/104.
CANpro/104 User Manual 19 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 Interrupts and Memory I/O R ange Selecti on CANpro/104’s interrupt lines and I/O ranges are jumper assignable. Interrupt Selection J1 and J2 ar e used for interrupt selection.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 20 800 -426-8979 | 519 -836-1291 Address Mode and Range Selection The first five jumper locatio ns of ju mper block J3 are used for b oard address selection.
CANpro/104 User Manual 21 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 Interrupt Sharing Jumper block J3 also plays a part in the interrupt shari ng. PC/104 suppor ts the sharing of an interrupt between multiple car ds.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 22 800 -426-8979 | 519 -836-1291 Other On-b oard Jumper Selec tion Near each I/O connector a 2 x2 jumper block (either J4 or J5) will allow the config uration of both bus termination and slew r ate limiting for the tra nsceiver.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 23 800 -426-8979 | 519 -836-1291 Connector Pin outs Table 25 : DB-9 Cable Connector Pinouts Pin No.
CANpro/104 User Manual CTIM-00043 (0.01) 1/15/2010 www.connecttech.com 24 800 -426-8979 | 519 -836-1291 Specification s Operating Environment Storage temperature: - 40 C to 125 C Operating temperature.
CANpro/104 User Manual 25 www .co nnecttech.com CTIM-00043 (0.01) 1/15/2010 800 -426-8979 | 519 -836-1291 Limited Lifetim e Warranty Connect Tech Inc. p rovides a Lifetime Warrant y for all Connect Tech Inc. pr oducts. Should this prod uct, in Connect Tech Inc.
An important point after buying a device Connect Tech CTIM-00043 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Connect Tech CTIM-00043 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Connect Tech CTIM-00043 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Connect Tech CTIM-00043 you will learn all the available features of the product, as well as information on its operation. The information that you get Connect Tech CTIM-00043 will certainly help you make a decision on the purchase.
If you already are a holder of Connect Tech CTIM-00043, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Connect Tech CTIM-00043.
However, one of the most important roles played by the user manual is to help in solving problems with Connect Tech CTIM-00043. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Connect Tech CTIM-00043 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
