Instruction/ maintenance manual of the product CM4000 CompuSTAR
Go to page of 8
IMPORTANT: All CM4000 Control Modules need firmware update s to be 2 Way Datalink compatible. Chec k CompuStar.com for the latest firmw are u pdates. CM4000 Alarm/Starter Control Module Installation Manual This manual is for authorized Com puStar Pro dealers.
Additional Items to Install Antenna Usually mounted on th e front windshi e ld. Stay at least 1 to 2 inch es away fr om metal and try to mount be low the tint s tripe. CompuShock Detects impacts to the vehicle. Can be zip-tied to a wire h arness or mounted w ith the supplied hardw are.
Option Programming Tables Option Programming with Remotes and OP500, RPS Unlock and Secure Va let are programmable ONLY when system is Unlo cked/Disarmed.
OPTION GROUP 4 Feature Default Setting - I Optional Setting - II Optional Setting - III Optional Setti ng - IV 4-01 Aux 1 output 0.5sec Latch 20 sec Program 4-02 Aux 2 output 0.
2-05 Cold Start with Thermistor A ssembly - This o ption turns on the cold /hot starting feature s. This op tion works in co njunction with 2-6, 2-8 and 2-9.
Option Programming Using the OP500 Option Pro grammer The OP500 can be used to program any available option . You must disarm the system before using . Y ou no longer need to pr ogram the remotes before using (V.36.2 or gr eater). It is required to progra m options in Special Option Groups 1 and 2.
Relay Diagrams For Con nect or 1 Green/White Loop (CM4000 and CM42 00DX Models) This loop wire deter mines the transmission setting. The default position (uncut loop) is for manual transmissions. When the loo p is cut, the system w ill be ready for automatic transmissions.
Technical Support Contacts Firstech technical support is re served for authorized dealers only. Monday - Friday 888-820-3690 pm Pacific Coast Time) Email (8:00 am – 5:00 support@compustar.c om Web http://www .compustar.com click on “dealer support” W i r e D i a g r a m s Click on the “Installogy Access Client” link found on your desktop.
An important point after buying a device CompuSTAR CM4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CompuSTAR CM4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CompuSTAR CM4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CompuSTAR CM4000 you will learn all the available features of the product, as well as information on its operation. The information that you get CompuSTAR CM4000 will certainly help you make a decision on the purchase.
If you already are a holder of CompuSTAR CM4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CompuSTAR CM4000.
However, one of the most important roles played by the user manual is to help in solving problems with CompuSTAR CM4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CompuSTAR CM4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
