Instruction/ maintenance manual of the product EC LM-2 AGA
Go to page of 20
12/06 EINS 513307 Remember , when replacing a part on this appliance, use only sp are parts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy part s that have not been clearly authorised by AGA-RANGES.
2 CONTENTS SECTION P AGE INST ALLA TION 3 GENERAL NOTES 4 INST ALLA TION 4 APPLIANCE DIMENSIONS 5-6 ELECTRICAL 7 INSTRUCTIONS 7 ELECTRICAL TEST PROCEDURE 7 WIRING DIAGRAM 8 USERS GUIDE 9 SAFETY PRECAU.
Inst allation Section 3 CAUTION: THIS UNIT IS HEA VY , PROPER EQUIPMENT AND ADEQUA TE MANPOWER MUST BE USED IN MOVING THE RANGE TO A VOID DAMAGE TO THE UNIT OR THE FLOOR Remember , when replacing a part on this appliance, use only sp are parts that you can be assured conform to the safety and performance specification that we require.
GENERAL NOTES INST ALLA TION NOTE: THESE INST ALLA TION INSTRUCTIONS SHOULD BE LEFT WITH THE APPLIANCE AND THE USER T O RET AIN FOR FUTURE REFERENCE. The Aga range is delivered unassembled.
AB C D F G H K L RS T 11 6 5 5 11 4 mm 987 889 851 679 1330 756 1 125 12 698 5 EC-LM MODEL Fig. 1.
Fig. 1B EE-LM MODEL AB C D F G H K L RS T 11 6 5 5 11 4 mm 1487 889 851 679 1330 756 1 125 12 698 Fig. 1A 6.
ELECTRICAL CONNECTION INSTRUCTIONS ELECTRICAL TEST PROCEDURE An electrical socket must be provided within 6 feet of the LH side of the appliance and easily accessible to the user to disconnect. Do not position socket above the appliance. Electric Shock Hazard Electrical Grounding is required on this appliance.
Fig. 2B Fig. 2A 8 DESN 513533.
Users Guide 9.
SAFETY PRECAUTIONS This booklet has been prepared in the interest of providing you with basic information on the safe and correct use of your Aga Range. Instructions are provided on the operation and maintenance after-care of the Aga range and we would recommend that you read this Owners Manual before you begin cooking.
DO NOT TOUCH SURF ACE UNITS OR AREAS NEAR UNITS - SURF ACES MA Y BE HOT . Areas near surfaces units may become hot enough to cause burns, do not touch, or let clothing or other flammable materials contact surface unit s or areas near units. GREASE W ARNING: HOT GREASE IS FLAMMABLE.
12 BLACK SIL VER too high too low correct amount of stored heat RED BLACK LINE The heat indicator is above the roasting oven door and has three sections: black, silver and red. When the indicator is on or about the black line in the silver section, the range is at the correct working temperature.
SERVICING OPERA TING YOUR AGA For continued efficient and safe operation of the appliance, it is import ant that servicing checks are carried out at service intervals recommended by your authorised Aga specialist. The following points are intended to help you during the period of change-over from your previous range to the Aga way of life.
FITTING OF OVEN SHEL VES DESN 512403 DESN 512404 Fig. 4 Fig. 5 If this is the first time you have used this type of oven shelf, go through the procedure of changing it with the aid of Figs.
REMOV AL OF OVEN SHEL VES DESN 512405 DESN 512406 Fig. 6 Fig. 7 15.
16 CLEANING AND CARING FOR YOUR AGA REMEMBER: BE CAREFUL OF THE HOT APPLIANCE. DO NOT USE A STEAM CLEANER TO CLEAN THIS COOKER. DO NOT USE ABRASIVE P ADS OR OVEN CLEANER. T op Plate and Front plate The easiest way to clean the Aga top plate and front plate is to mop up spills as they happen.
17.
18.
19.
20 For further advice or information please contact your local distributor/stockist With Aga-Rayburn’s policy of continuous product improvement, the Company reserves the right to change specifications and make modifications to the appliance described at any time.
An important point after buying a device AGA EC LM-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AGA EC LM-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AGA EC LM-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AGA EC LM-2 you will learn all the available features of the product, as well as information on its operation. The information that you get AGA EC LM-2 will certainly help you make a decision on the purchase.
If you already are a holder of AGA EC LM-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AGA EC LM-2.
However, one of the most important roles played by the user manual is to help in solving problems with AGA EC LM-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AGA EC LM-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
