Instruction/ maintenance manual of the product 9971-A50 Coleman
Go to page of 16
Shor eside TM Stainless Steel 2-Bur ner Pr opane Grill Use, Car e & Assembly Manual W ith Lighting Instructions Model 9971 Series ASSEMBLER/INST ALLER: Leave these instructions with the consumer . CONSUMER/USER: Read all instructions and keep in a safe place for future r eference.
2 DANGER 1. Never operate this appliance unattended. 2. Never operate this appliance within 10 f eet (3.05 m) of any other gas c ylinder . 3. Never operate this appliance within 25 f eet (7.5 m) of any flammab le liquid. 4. Heated liquids remain at scalding tempera- tures long after the cooking process.
3 CARBON MONO XIDE HAZARD • This appliance can produce carbon mono xide which has no odor . • Using it in an enclosed space can kill y ou. • Never use this appliance in an enc losed space such as a camper , tent, car or home . DANGER Only persons who can understand and f ollow the instructions should use or ser vice this outdoor g r ill.
4 CALIFORNIA PROPOSITION 65: W ARNING: This fuel, and byproducts of comb ustion of this fuel, contain chemicals known to the state of Calif or nia to cause cancer , birth defects, or other reproductive harm. • CARBON MONO XIDE HAZARD • This grill is a combustion appliance.
5 Maintenance • About stainless steel - Stainless steel e xposed to prolonged periods of high heat will change color and texture . Coleman grills require little preheating. T exture and color change is normal on interior components and will not affect the operation or perf or mance of the product.
Grill Assembl y 1. Install drip tra y below front of grill. (Fig. 1). 2. Inser t tab on heat tent into slot in back br ack et of grill. (Fig. 2) 3. Inser t tab on bottom right side of heat shield to lock into slot on grill brac ket.(Fig. 3) 4. Install the remaining heat shield as shown (Fig.
Grill Assembl y continued 5. Slip center notch on grate o ver tab on inside of g r ill. (Fig. 5) 6. Push down on left side of g rate to lock into tab on left side of grill. (Fig. 6) 7. T ur n regulator v alve knob to OFF . (Fig. 7) 8. Push regulator onto fitting on right side of grill and tur n fitting clockwise until hand tight.
Grill Assembl y continued 9. Remov e plastic cap from top of propane bottle and tur n propane cylinder clockwise into regulator until hand tight. (Fig. 9 & 10) 10. Ne ver oper ate grill with propane cylinder in an inv er ted position. (Fig. 11) 8 Fig.
9 • Do not attempt to operate this grill until you ha ve read and understood all General Saf ety Information in this manual and all assembly is com- plete and leak checks ha ve been perf or med. • Ne ver ignite grill with lid closed. Operation Fig.
10 T o Light NO TE: A gap of 1/8” should be maintained between the end of the wire on the electrode and the b urner tube for pr oper ignition spark. (Fig. 15) 1. Set on sturdy , flat surf ace. 2. Grasp end of wire with a needle nose pliers and carefully bend to adjust to proper spacing from burner tube (Fig.
11 G OOD Y ellow Blue Holes in Burner Blue Y ellow B AD Fig. 18 T o Light continued T o Match Light (continued) 4. A good flame should be blue with minimal y ellow tip . Some yello w tips on flames are acceptable as long as no carbon or soot deposits appear .
12 T o Clean continued 5. Optional Griddle has a non-stick coating. Use only nonmetallic utensils to prolong lif e of non-stick coating. 6. T o reduce sticking and impro ve clean-up , spra y cooking surf ace with v egetable oil prior to lighting grill.
13 1. F or storage or transpor t, regulator ma y be located below g rate. (Fig. 25 & Fig. 26) 2. Make sure lid is latched and carry grill with handle as shown.
14 T roub le Shooting Guide Prob lem P ossible Cause P ossible Solution Burner will not light Igniter electrode cov ered with Clean igniter electrode with igniter grease or residue Igniter/electrode t.
15 Replacement Parts List — 9971 Series No. Description P ar t Number 1 Grill Grate 5010000092 2 Heat T ent (1 pk.) 5010000093 3 Thermometer Assembly 5010000091 4 Regulator 5010000090 5 Rubber Leg P ads (4 pk.) 5010000095 6 Igniter/Piezo/Wire Assemb ly (2 pk.
16 9971-050 (20070628) The Coleman Company , Inc. • 3600 Nor th Hydr aulic • Wichita, KS 67219 U .S.A. 1-800-356-3612 • TDD: 316-832-8707 © 2007 The Coleman Company , Inc. All r ights reserved. Coleman® and are registered trademarks and InstaStar t™ and Shoreside™ are trademarks of The Coleman Company , Inc.
An important point after buying a device Coleman 9971-A50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coleman 9971-A50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coleman 9971-A50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coleman 9971-A50 you will learn all the available features of the product, as well as information on its operation. The information that you get Coleman 9971-A50 will certainly help you make a decision on the purchase.
If you already are a holder of Coleman 9971-A50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coleman 9971-A50.
However, one of the most important roles played by the user manual is to help in solving problems with Coleman 9971-A50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coleman 9971-A50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
