Instruction/ maintenance manual of the product JDD-58 ColdTech
Go to page of 8
COMMERCIAL REFRIGERA T OR OWNER'S MANUAL Back Bar / Direct Draw Coolers Models: JBB-58, JBB-80, JDD-58, JDD-80 This manual contains important information regarding your new C o l d T e c h unit. Please read the manual thoroughly prior to equipment set-up, operation and maintenance.
LIMITED W ARRANTY Jimex Corp. warrants to the original purchaser the ColdT ech unit sold and all parts thereof to be free from defects in material or workmanship, under normal use and service for a period of one (1) year from the date of purchase. In addition to the warranty set forth above, Jimex Corp.
INST ALLA TION/ OPERA TION IMPORT ANT!!! PLEASE READ BEFORE INST ALLA TION 1) If the unit has recently been transported please let unit stand still for a minimum of 24 hours before plugging it in. 2) Make sure that the unit drops down to desired temperature before loading the unit with product.
TEMPERA TURE CONTROLS The temperature controls are factory-set to maintain an average temperature of 38 F in refrigerators and 0 F in freezers. T o maintain a different temperature, simply adjust the control knob located inside the unit. T o decrease the temperature (colder), turn clockwise.
SAFETY / W ARNING Please pay close attention the the safety notices in this section. Disregarding these notices may lead to serious injury and/or damage to the unit. KEY 1) T o minimize shock and fire hazards, be sure not to overload outlet. Please designate one outlet for your unit.
REGULAR MAINTENANCE CLEANING THE CONDENSER COIL For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. ColdT ech recommends cleaning the condenser coil and fins at least once per month. Clean with a commercial condenser coil cleaner , available from any kitchen equipment retailer .
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Compressor not running. Fuse blown or circuit breaker tripped. Replace fuse or reset circuit b r e a k e r . Power cord unplugged. Plug in power cord.
T he New S ymbol of Innov ation™ MEMO RET AIN THIS MANUAL FOR FUTURE REFERENCE Please read the entire manual carefully before installation and operation. If certain recommended procedures are not followed, warranty claims will be denied. Notice: ColdT ech reserves the right to make changes in design and specifications without prior notice.
An important point after buying a device ColdTech JDD-58 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ColdTech JDD-58 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ColdTech JDD-58 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ColdTech JDD-58 you will learn all the available features of the product, as well as information on its operation. The information that you get ColdTech JDD-58 will certainly help you make a decision on the purchase.
If you already are a holder of ColdTech JDD-58, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ColdTech JDD-58.
However, one of the most important roles played by the user manual is to help in solving problems with ColdTech JDD-58. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ColdTech JDD-58 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
