Instruction/ maintenance manual of the product CATX2LCD Code Alarm
Go to page of 2
Model CA TX2LCD Programming Guide The keychain transmitters included with the system have been pre-programmed at the factory , with each button pre-assigned to control a specific function of the system. The system will store codes from up to 8 different transmitters.
Changing the Remote Control Battery The AAA alkaline battery supplied in your remote transmitter should last approximately one year , depending on usage. When the battery begins to weaken, you will notice a decrease in range, or the distance from your vehicle that your remote transmitter will operate.
An important point after buying a device Code Alarm CATX2LCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Code Alarm CATX2LCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Code Alarm CATX2LCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Code Alarm CATX2LCD you will learn all the available features of the product, as well as information on its operation. The information that you get Code Alarm CATX2LCD will certainly help you make a decision on the purchase.
If you already are a holder of Code Alarm CATX2LCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Code Alarm CATX2LCD.
However, one of the most important roles played by the user manual is to help in solving problems with Code Alarm CATX2LCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Code Alarm CATX2LCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
