Instruction/ maintenance manual of the product CA-630 Code Alarm
Go to page of 14
1 Remote V ehicle Control System IMPORT A NT NOTE: The operation of the IV -F65 as described in this manual is applicable to most vehicles. However, due to the engine type and configuration of some vehicles (i.e. diesel engines), some functions AND/OR SAFETY PRECAUTIONS may not apply .
2 Features and Benefits of the CODE ALARM CA- 630 ............... 3 Note: Any feature or function noted with “optional” requires additional installation labor , component s and installation cost. See your dealer for details. Using the Security features .
3 Features and Benefits of the Code Alarm CA-630 T wo Easy-to-Use Weather-Resistant Remote Controls The remote controls included with the Code Alarm CA-630 utilize durable, moisture resistant cases and sealed rubber buttons for reliability and long life.
4 Arming the Security System T o arm the system, exit the vehicle, close all doors, then press* the LOCK button. The horn will “chirp” twice † and the p arking lights will flash twice, indicating the system is armed. The doors will also lock at this time (if equipped and connected).
5 Using the Security and Keyless Entry features (cont.) Activating Trunk Release Feature (vehicle must have power trunk/hatch) Press and hold the UNLOCK button for 2 seconds to open the vehicle trunk or hatch. Using the Progressive Car Finder Feature Press the FIND/P ANIC button on the remote control to locate your vehicle.
6 Y ou can turn off all remote start and Security functions by engaging the V alet/Service Mode: • T o engage V alet/Service mode, turn the ignition key to the ON position (last position before start) and press the LOCK and UNLOCK buttons on the remote control simultaneouly .
7 Using Y our Remote Starter (cont’d) Entering the Vehicle While It is Running via Remote Start 1. Press the UNLOCK button on the remote control to unlock the vehicle’s door(s) and turn off the alarm system (if it is not already off). 2. Enter the vehicle.
8 Automatic Convenience Options The CA-630 performs a variety of automatic functions to enhance security and comfort. Some of these features are programmable a t t he time of installation.
9 System Maintenance Changing the Remote Control Battery The 12-volt alkaline battery supplied in your remote transmitter should last approximately one year , depending on usage. When the battery begins to weaken, you will notice a decrease in range, or the distance from your vehicle that your remote transmitter will operate.
10 Basic Troubleshooting This section outlines some of the basic issues you may experience while becoming used to the IV -F65. If you have a pr obl em that is not covered by this section, please consu.
11 Emergency Disarm Procedure If your remote control is lost or fails to function, use this procedure to disarm the CA-630 and start your vehicle. 1. Use the keys to enter the vehicle. The alarm will sound once the door is opened. 2. Insert the key into the ignition and turn to the ON position.
12 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorize.
13 Plan duration: 3 Y ears from the date of inst allation. Plan amount: Maximum allowable value equal to insurance deductible or up to $2,500 whichever is less. Conditions of the Theft Protection Program: 1. The Thef t Protection Program is non-transferable and non-assignable.
14.
An important point after buying a device Code Alarm CA-630 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Code Alarm CA-630 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Code Alarm CA-630 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Code Alarm CA-630 you will learn all the available features of the product, as well as information on its operation. The information that you get Code Alarm CA-630 will certainly help you make a decision on the purchase.
If you already are a holder of Code Alarm CA-630, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Code Alarm CA-630.
However, one of the most important roles played by the user manual is to help in solving problems with Code Alarm CA-630. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Code Alarm CA-630 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
