Instruction/ maintenance manual of the product CA-310 Code Alarm
Go to page of 7
128-6832 1 of 16 Avoid mounting components or routing wires near hot surfaces Avoid mounting components or routing wires near moving parts T ape or loom wires under hood for protection and appearance .
128-6832 2 of 16 2 INST ALLA TION OF THE MAJOR COMPONENTS Control Module: Select a mounting location inside the passenger compartment (behind the dash), and secure using the two screws provided. The control module can also be secured in place using cable ties.
128-6832 3 of 16 3 WIRING THE SYSTEM Red : +12 VDC CONST ANT BA TTERY SOURCE Connect this wire to a +12 V olt constant source found at the vehicles ignition switch. This wire provides power for the control module. Orange: 300 mA Ground Output When Armed -N.
128-6832 4 of 16 4 Grey: (-) Hood/Trunk Trigger This is an instant on ground trigger wire. It must be connected to the previously installed hood and/or trunk pin switches.
128-6832 5 of 16 Black/White: Illuminated Entry Output 200 mA (-) This wire provides a 30 second ground output whenever the system is disarmed using the OEM transmitter , and pulses ground when the alarm is triggered.
128-6832 6 of 16 5 COMPLETING THE INSTALLATION Adjusting the Shock Sensor : Gently turn the adjustment knob counterclockwise to turn down the sensitivity and turn clockwise to turn up sensitivity .
128-6832 7 of 16 5 B L ACK / R E D 1 - 8 SELECT ABLE PULSED OUTPUT(-) WHITE/BLUE (ARM INPUT).
An important point after buying a device Code Alarm CA-310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Code Alarm CA-310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Code Alarm CA-310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Code Alarm CA-310 you will learn all the available features of the product, as well as information on its operation. The information that you get Code Alarm CA-310 will certainly help you make a decision on the purchase.
If you already are a holder of Code Alarm CA-310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Code Alarm CA-310.
However, one of the most important roles played by the user manual is to help in solving problems with Code Alarm CA-310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Code Alarm CA-310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
