Instruction/ maintenance manual of the product CA-120 Code Alarm
Go to page of 11
128-6530 1 of 10 CA 120 Owners Manual.
128-6530 2 of 10 Page 2 Y our System has many features and available options some of which are selected at time of installation. Consult your installing dealer for options that may have been installed and are not listed. ARMING THE SYSTEM: 1. T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk.
128-6530 3 of 10 P ASSIVE ARMING THE SYSTEM: If the passive arming feature has been selected: T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk. The dash mounted LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun.
128-6530 4 of 10 Page 4 DISARMING THE SYSTEM: As you approach the vehicle, press and release the DISARM button on the keychain transmitter . The p arking lights will flash 2 times, the siren will chirp 2 times, and the dash mounted LED will turn off. If you have the optional door lock/unlock circuit installed, the doors will unlock.
128-6530 5 of 10 Page 5 INTRUSION W ARNING SIGNAL: This system will inform you if an intrusion attempt has occurred while you were away from the vehicle. Upon disarm, the siren will chirp 4 times and the parking lights will flash 3 times. Enter the vehicle and before turning on the ignition switch, observe the LED flash pattern.
128-6530 6 of 10 Page 6 MANUALL Y OVERRIDING YOUR SYSTEM: USING THE V ALET SWITCH/ MANUAL OVERRIDE Y our system can be disarmed without the use of the keychain transmitter . This is necessary , since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails.
128-6530 7 of 10 Page 7 ANTI HI-JACK MODE OPERA TION 1. a) With the ignition switch on, and the doors closed, press and hold both buttons of your keychain transmitter for 1 second to initiate the anti hi- jack mode or open the door any time the ignition is on.
128-6530 8 of 10 ALARM DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = A RMED OFF = DISARMED ON SOLID = V ALET MODE 5 FLASH...P AUSE = TRIGGER ON IGNITION SWITCH 4 FLASH...P AUSE = TRIGGER ON SHOCK SENSOR 3 FLASH...P AUSE = TRIGGER ON DOOR SWITCH 2 FLASH.
128-6530 9 of 10 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased fro.
128-6530 10 of 10 Code Systems, Inc. Limited Lifetime Warranty - Cont Code Systems, Inc. Limited Lifetime Warranty - Cont Code Systems, Inc. Limited Lifetime Warranty - Cont Code Systems, Inc. Limited Lifetime Warranty - Cont Code Systems, Inc. Limited Lifetime Warranty - Cont CODE-SYSTEM, INC.
128-6530 11 of 10 How to file a request for payment: If the above conditions are met, make your request for payment by submitting the following to CODE. The request for payment must be received by CODE no later than sixty (60) days after the vehicle is reported stolen.
An important point after buying a device Code Alarm CA-120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Code Alarm CA-120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Code Alarm CA-120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Code Alarm CA-120 you will learn all the available features of the product, as well as information on its operation. The information that you get Code Alarm CA-120 will certainly help you make a decision on the purchase.
If you already are a holder of Code Alarm CA-120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Code Alarm CA-120.
However, one of the most important roles played by the user manual is to help in solving problems with Code Alarm CA-120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Code Alarm CA-120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
