Instruction/ maintenance manual of the product CA 310 Code Alarm
Go to page of 8
128-6530 1 of 10 CA 310 Owners Manual.
128-6530 2 of 10 Page 2 Y our system has many features and available options some of which are selected at time of installation. Consult your installing dealer for options that may have been installed and are not listed. ARMING THE SYSTEM: 1. T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk.
128-6530 3 of 10 Whenever the system is triggered, the vehicle's parking lights will flash for the full siren sounding period. Optional - whenever the system is triggered, the interior courtesy light will flash for the full siren sounding period.
128-6530 4 of 10 Page 4 If the LED flashes 4 times...pause, 4 times...pause etc., then an intrusion attempt was made by impact or a strong vibration that the shock sensor detected.
128-6530 5 of 10 Page 5 ELIMINA TING/RETURNING THE NORMAL ARM/DISARM CHIRPS Y ou can selectively eliminate the normal arm & disarm chirps using the valet/ override switch, following these steps. 1) T urn the ignition key ON the OFF . 2) Within 10 seconds of turning the ignition key OFF , press and release the valet/override switch 3 times.
128-6530 6 of 10 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased fro.
128-6530 7 of 10 CODE-SYSTEM, INC. Thef t Protection Program The Thef t Protection Program is designed to provide the retail purchaser of a security system provided by CODE-ALARM, INC. (“CODE”) an additional benefit, at no additional cost to the purchaser , should their vehicle be stolen while protected by a CODE-ALARM security system.
128-6530 8 of 10 How to file a request for payment: If the above conditions are met, make your request for payment by submitting the following to CODE. The request for payment must be received by CODE no later than sixty (60) days after the vehicle is reported stolen.
An important point after buying a device Code Alarm CA 310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Code Alarm CA 310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Code Alarm CA 310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Code Alarm CA 310 you will learn all the available features of the product, as well as information on its operation. The information that you get Code Alarm CA 310 will certainly help you make a decision on the purchase.
If you already are a holder of Code Alarm CA 310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Code Alarm CA 310.
However, one of the most important roles played by the user manual is to help in solving problems with Code Alarm CA 310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Code Alarm CA 310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
