

Coby Ele ctronics Corp. 56-65 Rust Street Maspeth, NY 11378
Please read manual before operation



128 MB Integrated Flash Memory
MP3 and WMA Playback
0 05/ 00 8 02 :29 /0 4: 16
Integrated Microphone for Voice Recording
Mp3 player User's Manual
Portable Storage Device (Music, Data, and Pictures)
Integrated USB Plug (no cable required)
Plug and Play (no driver installation required for Windows 2000/ME/XP or Mac OS X 10.2.6 or greater)
Earphones w/neck strap USB Extension Cable
Song Title and Synchronized Lyric Support
Installation CD (for Windows 98 SE) 3 4

1.Read these instructions carefully. Keep these instructions for future reference. 2.Heed all warnings and follow all instructions. 3.Do not expose to water or moisture. 4.Clean only with a dry cloth. 5.Do not install near any apparatus that produces heat such as stoves, radiators, amplifiers, etc. 6.Remove the battery when the device will be unused for long periods of time. 7.Do not use headphones/earphones while cycling, driving, or operating a motorized vehicle. 8.Do not drop or otherwise subject the device to impact. Physical impact may result in loss of data. Users are responsible for creating backups of their data. Coby Electronics cannot be held liable or be otherwise responsible for loss of data. 9.Do not disconnect the USB cable or turn off the device while transferring files to or from your device. Data loss may occur as a resu lt. 10.Do not open or attempt to repair this device. Refer all repairs to authorized service personnel.
Protect your ears:
Hearing experts advise against the constant use of personal stereo equipment played at high volumes. Constant high-volume use can lead to hearing loss. If you experience ringing in your ears or hearing loss, discontinue use and seek medical advice.
For recycling or disposal information about this product, please contact your local authorities or the Electronics Industries Alliance: www.eiae.org
Handling the cord on the earphones will expose you to lead, a chemical known to the State of California to cause [cancer, and] birth defects or other reproductive harm.
Wash hands after handling.



HOLD Switch Volume Control


Joystick Left MODE (Press joystick) Joystick Right

Transferring Files to Your Player
USB Driver Installation (Windows 98 SE Only)
If you are using Windows 98 SE, you install the USB driver and update utility.
To transfer files between your player and a computer:
1.Place the Installation CD in your computer's CD-ROM drive. 2.In My Computer, double-click the disc drive (D:) icon (where D: is your CD-ROM drive). 3.Find and double-click "Win98Driver.exe" to start the installation process. A setup dialog window will appear on the screen. 4.Follow the on-screen instructions. When setup is complete, restart your computer.
1.Connect your player to the computer. 2.Open Windows Explorer on the computer. 3.Select the files you want to transfer from your computer and drag-and-drop them to the removable disk icon (ie, your player). You can also transfer files from your player to a computer.
Do not disconnect your player while it is transferring files.
Doing so may corrupt or damage the firmware and/or files on your player. If your player is accidentally disconnected while it is transferring files and does not work properly, remove and replace the battery, and then turn your player on again.
USB driver installation is not necessary if you are using Windows Me/2K/XP or Mac OS X version 10.2.6 or above. Simply connect your player to the computer; the operating system will then take a moment to set up and a removable disk icon will appear in "My Computer". (For Mac OS X users, a removable disk icon will appear on the "Desktop".)
Deleting Files through a Computer
To connect your player to a computer:
With your player connected to a computer: 1.Open Windows Explorer on the computer. 2.Double-click on the removable disk icon (ie, your player). 3.Use the mouse to select the files you would like to delete. Press delete on your keyboard and click Yes to confirm.
1.Remove the USB cap to expose the integrated USB plug. 2.Plug your player directly into the computer's USB port or use the USB extension cable (included).
To safely disconnect your player from a computer:
1.Double-click the green arrow in the taskbar located at the bottom-right of the computer's screen. A "Safely Remove Hardware" window will appear. 2.In the list of hardware devices, double-click on "USB Mass Storage Device". A "Stop a Hardware Device" window will appear. Click the OK button. You may now safely disconnect your player from the computer.
You can also delete files directly from your player. See "DEL in the section of this manual for more information.
Transferring Files · must · Connecting/Disconnecting Your Player

Playing Music
Play a Music Track
The Hold switch locks/unlocks the joystick and buttons on your player to prevent them from being pressed accidentally.
1.Enter the Music mode (see "Music" in the section of this manual for more information). 2.Press to start playback.
Hold Off:
Slide the HOLD switch in the opposite direction of the arrow marking on your player to unlock the player. Slide the HOLD switch in the direction of the arrow to lock your player. The screen will display the "lock" symbol shown below.
1.To pause playback, press once. Press again to resume playback.
Hold On:
005/008 02:29/04:16
The light of the world
2.To stop playback, press and hold for 2 seconds (ie, until the screen displays "Continue Holding on To Power Off"). Press again to resume playback.
Turning Power On and Off:
Power On:
Press and hold to turn your player on. The screen will display the COBY logo first, and then the remaining storage capacity of your player.
005/008 02:29/04: 16
005/ 00 8 02 :2 9/ 04:16
The light of the world
The light of the world
1.Press to select the next track. 2.Press to select the previous track.
Power Off:
Press and hold . The screen will display "Contin e Holding on To Power Off". Do not release the button until the screen displays "GOOD BYE .
1.Press and hold to fast forward through a track during playback. 2.Press and hold to reverse through a track during playback.
1.Press Volume to decrease the volume. 2.Press Volume to increase the volume.

Main Menu Option
Press and hold MODE to access the Main menu.
In the Main menu, the following options are available: MUSIC, VOICE, REC, FM, SET, DEL, INF, and EXIT.
Press and to change the selection left and right within the menu. Press MODE to confirm a selection. Press Volume + to cancel or return to a previous menu.
Select MUSIC mode to play your digital audio tracks (ie, Mp3 and WMA files). See the section of this manual for more information.
REC
FM
SET
Normal, Repeat One, Repeat All, Shuffle, Preview
EQ -
Select VOICE mode to play your voice recording files. Playback operation is the same as in MUSIC mode. See the section of this manual for information on how to record from the integrated microphone.
Normal, Rock, Jazz, Classic,
REC
BACKLIGHT LIGHT COLOR
MENU
Disable, 1 Mins, 2 Mins, 5 Mins, 10 Mins,
LANGUAGES
- English, Spanish, German,
DEL
Delete Music or Voice file

FM
Select REC mode to create voice recordings with the integrated microphone.
Select FM mode to listen to FM radio station broadcasts. To exit FM Tuner mode, press MODE briefly.
There are 2 methods of tuning into stations: LISTEN (preset stations) and SEARCH (manual scan).
Select REC from the Main menu. The player will start recording immediately. The screen will display a Recording symbol to indicate that recording is in progress.
Press to change between LISTEN and SEARCH.
LISTEN is the default method of tuning. Your player can store 30 station presets (CH01CH30). CH00 indicates that the current station has not been preset.
Press to pause recording. The screen will display a Recording Paused symbol to indicate that recording has been paused. Press again to resume recording. Press the MODE key to stop recording. The recorded file will be named "VXXX.WAV" where XXX corresponds to the numerical sequence in which the recording was made. (Numbering starts from 001.)
Press to select the next preset station. Press to select the previous preset station.
SEARCH allows you to manually scan and tune to all radio frequencies.
Press or to decrease or increase the frequency, respectively. Press and hold or to seek the previous or next frequency with a broadcast signal, respectively.
To play your recordings, select VOICE from the Main menu. See "Voice" in the section for more information.
To record FM broadcasts, see the FM Tuner Operation section.

Delete Files
To store preset stations, you must be in SEARCH (manual scan) mode.
To store your preset stations manually:
Select DEL mode to delete files from your player. You may also delete files using a computer; see the
1.Tune to the station you want to store as a preset. 2.Press and hold MODE. The LCD will display "Store". 3.Press or to select a preset channel number. 4.Press MODE to store the preset. The LCD will display "Success".
section of this manual for more information.
Deleting Files Through a Computer
In the Delete Menu, the following options are available: MUSIC, VOICE, or EXIT. Select MUSIC to delete your music files; select VOICE to delete your voice recording files.
To store your preset stations automatically:
while in Manual mode. The player will automatically scan and store as presets all radio frequencies with a broadcast signal.
The recording process for FM broadcasts is the same as for voice recording. See the section of this manual for more information.
Once you have made your selection, your player will list each music or voice file to be deleted one-by-one.
Tune to the station you want to record. Press and hold to start recording the FM radio broadcast. Press again to pause recording. Press MODE to stop and save the recording. The recorded file will be named "FXXX.WAV" where XXX corresponds to the numerical sequence in which the recording was made. (Numbering starts from 001.)
Select YES to delete the current file being displayed. The screen will display a quick confirmation that the file has been deleted and then move to the next file.
Select NO to skip the current file being displayed and move to the next file. Select Exit to return to the previous Delete menu.
To play your FM broadcast recordings, select MUSIC from the Main menu. See "Music" in the section for more information.
Store Preset Stations · Press and hold · Record FM Broadcasts

Settings Menu
Select Backlight to set the duration of time (in seconds) that the backlight will remain on. The options are 5, 10, 30, Always, or Off.
Select SET mode to access the Settings menu of your player. In the Settings menu, the following options are available: MODE, EQ, CON, BL, COL, PWR, REC, LRC, LAN, and EXIT.
Select Lightcolor to set the color of the backlight:
Color 1, Color 2, Color 3, Color 4, Color 5, Color 6, Color 7 or Auto. The Auto setting will change the backlight color each time a button is pressed.
Select Playmode to set the Play Mode options.
Normal: Play tracks in normal order. Repeat One: Play the current track repeatedly. Repeat All: Play all tracks repeatedly. Shuffle: Play all tracks in random order. Preview: Play the first few seconds of each track.
Select Power to set the amount of time (in minutes) your player can be idle before it turns off automatically. The options are 1, 2, 5, 10, or Disable.
Playmode options may also be set by pressing the MODE key while playback has been stopped.
Select Record Set to set the recording quality option of your player.
Select Equalizer to set the Equalizer options. The options are Normal, Rock, Jazz, Classic, Pop, or Bass.
Normal: Lower quality, small file size. Middle: Medium quality, medium file size. High: High quality, largest file size.
Select Contrast to set the contrast level of the LCD screen. A setting of 0 is lightest; a setting of 10 is darkest.

A-B Repeat mode allows you to define a segment of an audio track to be played repeatedly on a loop.
Select Lyric to set your player's lyric display On or Off.
Lyric display requires a ".LRC" lyric file. Lyric files may be found on the internet or can be created with a Lyric file editor. Lyric files should have the same name as its corresponding music file and be placed in the same directory (eg, "SongTitle1.lrc" and "SongTitle1.mp3").
During music or voice file playback, press the MODE key briefly to set the start point of the audio segment loop. The screen will display "A-".
Press the MODE key briefly again to set the end point of the audio segment loop. The screen will display "A-B".
Select Languages to set the language that your player's menus will be displayed in. Options are English, Spanish, German, French and Portuguese.
This audio segment will now play repeatedly in a loop.
Press the MODE key briefly again to resume normal playback.

Firmware Upgrade

Firmware updates may be found at . Check this site periodically for new updates. Firmware updates may add new functionality to your player.
To upgrade your player's firmware: 1.Download the latest firmware for your player from . Save this file to the computer. 2.Connect your player to the computer. 3.Double-click the downloaded file*. In the window that appears, double-click the file "stupdaterapp.exe". This will launch the firmware update application. 4.A dialog box will appear. Click "OK".
6.Click "Start" to begin the firmware update.
Do NOT disconnect your player while it is updating.
7.The update is complete when the green status bar has been filled. Click "Close". 8.Disconnect your player from the computer.
Your player will turn on automatically and update its firmware.

For more information on how to safely connect to and disconnect from a computer, refer to the
Connect to a Computer
section of this manual.
* You must have a file compression utility installed on your computer.

Troubleshooting
This troubleshooting guide aims to save you time in case you experience any inconvenience with this digital audio player. If you are still having difficulty, please contact Technical Support.
Poor FM reception 1. Ensure that your earphones are plugged into the headphone jack. (The cord of the earphones work as an FM antenna.) 2. Adjust the position of your earphone cords and player. Turn off nearby electronic devices.
My player does not work.
1.Ensure that the battery is charged. 2.Ensure that the battery has been properly installed.
There's something wrong with the LCD screen. 1.Remove, and then replace the battery. 2.Please call Technical Support for a Hot-key reboot.
File transfer failure.
1.Ensure that the USB driver has been installed correctly on the PC. 2.Ensure that the USB cable is attached securely to both the PC and your player. 3.Ensure that your player's memory capacity limit has not been reached. 4.Ensure that the battery is charged.
Telephone:800-681-2629 or 718-416-3197
You can also reach us online at or by e-mail at . www.cobyusa.com techsupport@cobyusa.com
Poor sound quality or no sound.
1.Ensure that the volume level is not set to "0". 2.Ensure that your headphones are attached securely to the headphone jack. 3.Poor sound quality may result from corrupt or poorly encoded music files. Try downloading the music file again or encoding the file at a higher bitrate. The recommended minimum bit rate for this player is 128 kbps for Mp3 files and 64 kbps for WMA files.


1.2"x0.9"(WHD)
USB Rev. 2.0 Full Speed

0.01%-0.1%
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.