Instruction/ maintenance manual of the product FST Series AG Neovo
Go to page of 12
5 Wire Analog Resistive T ouchscreen FST Series Product S pecifications.
2 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s T able of Contents 1. Product Speci fications ................................................................................................... 3 1-1. Product Applic able ..
3 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 1. Product Specifications 1-1. Product Applicable § This specification is applied to the 5 wire analog resistive touchscreen: FST Series. 1-2. Structur e § Dimensions, structure, and shape ar e referred on the drawing attached.
4 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 1-6. Appearance § Scratch, dust (W = width, L = length, D = average diam eter = (longest + shortest) /2) Item Size (mm) Length (mm) Accept able Numbers T otal 0.1 ≥ W>0.
5 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 2. T esting Regulation 2-1. T esting Regulation § If the regulation is not specif ied, the test is performed und er the supplier ’s regulation. § T ests are performed under the room temperature u n less specified.
6 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 2-4. Electrical Characteristics § T erminal Resistance T est Condition: T op and bottom electrod es are measured at the terminal.
7 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 3. Reliability Condition 3-1. T emperature Conditi on § T emperature Condition T est Following test are performed in the c .
8 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 5. Handling Notes 5-1. Precautions § This product is intended for use in st andard applic ations (computers, office automation, and other of fice equipment, industrial, communications, and measur em ent equipment, personal and household devices , etc.
9 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 5-5. Mounting Notes § Gap between the Bezel and T ouchscreen A gap of approximately 0.5mm is neede d between the bezel and the top electrode. It may ca use une x pected input if the gap is too narrow .
10 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 6. W arranty 6-1. W arranty Period § The w arranty period is limited to 3 years from the dat e of shipping. The warranty for the initia l defection such as appearance defection is limited to 1 month.
1 1 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s 7. Revision history Rev1.0 (May 1 1, 2005) Initial release Rev1.1 (July 13, 2005) 4-1.Recommended Connector is changed RE-H052SD-1 130 to RE-H05 2SD-1 1 10. 6-1.W arrant y Period is c hanged 5 years to 3 years.
12 Rev . 2.0 ©2005 - 2006 DMC Co., Ltd. FST Series Product S pecification s FST Series Product S pecifications Rev . 2.0, October 13, 2006 © 2005 - 2006 DMC Co., Ltd. This document can be freely distributed, but any alternation to this document is prohibited.
An important point after buying a device AG Neovo FST Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AG Neovo FST Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AG Neovo FST Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AG Neovo FST Series you will learn all the available features of the product, as well as information on its operation. The information that you get AG Neovo FST Series will certainly help you make a decision on the purchase.
If you already are a holder of AG Neovo FST Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AG Neovo FST Series.
However, one of the most important roles played by the user manual is to help in solving problems with AG Neovo FST Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AG Neovo FST Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
