Instruction/ maintenance manual of the product CX-CD250 Coby
Go to page of 2
INTRODUCTION Please read and follow the instruction manual carefully be- fore operating in order to avoid any damage to the unit. 1.By using AC power Insert one end of the AC power cord into the AC socket on the rear of the unit and the other end into a standard wall socket.
This unit is equipped with ALC (Automatic Level control) cir- cuitry that automatically sets the recording to the optimum level. Adjusting the VOLUME control does not effect the recording. We recommend that the unit be powered by AC (house current) when recording since this function uses the most power .
An important point after buying a device Coby CX-CD250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coby CX-CD250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coby CX-CD250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coby CX-CD250 you will learn all the available features of the product, as well as information on its operation. The information that you get Coby CX-CD250 will certainly help you make a decision on the purchase.
If you already are a holder of Coby CX-CD250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coby CX-CD250.
However, one of the most important roles played by the user manual is to help in solving problems with Coby CX-CD250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coby CX-CD250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
