Instruction/ maintenance manual of the product ESD-9210 Cobra
Go to page of 16
Operating Instructions for Y our Cobra ® 10 Band ™ Extra Sensor y Detection ® RADAR/LASER DETECTOR MODEL ESD – 9210 Nothing comes close to a Cobra™ X K Ka V S.
X K Ka V S windshield bracket mount ON-OFF/VOLUME control radar , VG-2 and safety/strobe indicators SmartMute™ indicator signal strength, laser and CITY/HIGHW A Y mode indicators 12V DC POWER JACK .
Important Information A1 T able of Contents Important information about... Federal Laws, Safety Alert ® /Strobe Alert ™ , Safe Driving, Security of Y our Vehicle, Customer Support ....................................................................
3 1 INST ALLA TION Where to Mount Y our Unit Y ou will get optimum performance from your ESD-9210 if you mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear .
1 INST ALLA TION Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear , level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook-and-loop fastener .
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 7 6 X K Ka V S X K Ka V S City mode Highway mode When changing the settings on your ESD-9210, please keep in mind: • Buttons can have multiple functions.
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS Muting an Alert Y our ESD-9210 allows you to quickly turn off an audio alert by momentarily pressing the MUTE button. If you press the MUTE button a second time during the alert, the audio alert will be turned back on.
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 11 10 Setting the SmartMute ™ Activation Point Y our ESD-9210 must be installed in your vehicle. Caution: Do not attempt to set the rev point while driving. Y our vehicle should be parked and idling .
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS Vo ice/T one Setting Y ou can set your ESD-9210 to sound alerts with either a voice or a tone. Y ou change settings by using the MUTE button. In V oice Alert™ mode you will first hear several tones, then a voice message announcing the type of signal detected, followed by more tones.
4 DETECTION 15 4 DETECTION 14 Signals Detected The tables on the following pages show you the types of signals your ESD-9210 will detect, as well as the voice and visual alerts it provides for each one.
4 DETECTION 4 DETECTION 17 16 PLEASE NOTE : There are different tones for each Safety Alert ® VG-2 Alert ® Safety Alert ® T ype of Signal emergency vehicles road hazards trains V oice ” emergency.
5 5 UNDERST ANDING RADAR & LASER Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.525 GHz K band 24.150 GHz Ka band 33.400-36.
6 MAINTENANCE & SERVICE 6 MAINTENANCE & SERVICE 21 20 If you suspect that your unit requires service, please call 773-889-3087 BEFORE shipping it to Cobra . ® This will ensure that you receive service as quickly as possible. If you are asked to send your unit to the Cobra ® factory , please follow these steps: 1.
23 7 W ARRANTY 22 COBRA ELECTRONICS CORPORA TION warrants that its Cobra ® 10 Band™ Radar/Laser Detectors, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first consumer purchase.
10 ORDER FORM 25 For credit card orders fill out order form and fax to: 773.622.2269 or call 773.889.3087 (Press 1 from the main menu) 8:00 am - 6:00 pm, M-F , CST . Make check or money order payable to: Cobra Electronics 6500 West Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept.
Printed in Korea Part No. 480-017-P ©2002 Cobra Electronics Corporation 6500 W est Cortland Street Chicago, IL 60707 USA The Cobra ® line of quality products includes: CB radios microT ALK ® radios.
An important point after buying a device Cobra ESD-9210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cobra ESD-9210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cobra ESD-9210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cobra ESD-9210 you will learn all the available features of the product, as well as information on its operation. The information that you get Cobra ESD-9210 will certainly help you make a decision on the purchase.
If you already are a holder of Cobra ESD-9210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cobra ESD-9210.
However, one of the most important roles played by the user manual is to help in solving problems with Cobra ESD-9210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cobra ESD-9210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
