Instruction/ maintenance manual of the product Janus Aesthetix Audio
Go to page of 11
Janus PREAMPLIFIER OWNER'S MANUAL Aesthetix Audio Corporation 5144 N. Commerce Ave. Suite A ♦ Moorpark, Ca. 93021 Phone: (805) 529-9901 ♦ Fax: (805) 529-9902.
INTRODUCTION Thank you for purchasing the Janus preamplifier. The Janus is a groundbreaking audio component which combines sonic quality, innovative features and build quality with lineage directly traceable to the reference Callisto line stage and Io phono stage.
CONNECTIONS Important: Ensure the rear panel power switch is in the off position whenever changing connections. Also ensure that the power amplifier is off. 1) Connect one or more source components to the Janus' inputs. Both balanced and single-ended connections are provided for each input.
INPUT SELECTION Press any of the five input selection buttons to select the desired input. Tape input selection will monitor the output from a cassette deck. Press PHONO to select the high gain phono preamplifier. VOLUME Volume is controlled by pressing the left side of the display glass for down, the right side for up.
Follow these steps to configure an input for bypass: 1) Select desired input. 2) On the front panel only (not remote control), depress the bypass button and hold it in the depressed position. The bypass LED will light. 3) While holding the bypass button, press the input button again.
DISPLAY In normal operation, the level setting is displayed and various indicator lights will be illuminated. When the display button is pressed, all lights will extinguish. Pressing any button will turn on the display and indicator lights for 5 seconds, and then extinguish.
The correct loading will be achieved when music has the right balance of dynamics, high frequency extension and lack of glare or brightness. Generally speaking, less loading (higher ohms) results in more high frequencies and m ore dynamics but can be too bright with some cartridges.
Advanced display functionality This unit contains the ability to sense the ambient light level in the room and adjust the display and LEDs accordingly. While the factory settings will work for mo st situations, there may be times when adjustm ent to the settings is useful.
Pressing button #1 will turn on LED#1, which indicates that pressing the “up” or “down” buttons will change to a different light level setting, for which the LED brightness could then be changed by pressing button #2. Changes to the LED brightness will only be visible for the current light level.
Specifications Fuses: External fuse (in IEC power connector) 2 amp slow blow (117v) 1 amp slow blow (230v) Spare fuse included in IEC power connector. Tubes: Phono Section V1 & V2 12AX7LP V3 12AX7.
90 DAY LIMITED WARRANTY TERMS AND CONDITIONS (3 Year optional extended service cont ract) 1. Aesthetix warrants the product designat ed herein to be free of manufacturi ng defects in mate rial and workmanship, subject t o the conditions herein se t fort h, for a period of 90 days from t he date of purchase by the original purchaser.
An important point after buying a device Aesthetix Audio Janus (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aesthetix Audio Janus yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aesthetix Audio Janus - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aesthetix Audio Janus you will learn all the available features of the product, as well as information on its operation. The information that you get Aesthetix Audio Janus will certainly help you make a decision on the purchase.
If you already are a holder of Aesthetix Audio Janus, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aesthetix Audio Janus.
However, one of the most important roles played by the user manual is to help in solving problems with Aesthetix Audio Janus. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aesthetix Audio Janus along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center