Instruction/ maintenance manual of the product LCD26168 Clover Electronics
Go to page of 176
1 INSTRUCTION MA NUAL 26” Wide LCD Screen All in One System Built-in 16Ch DVR MODEL: LCD26164, LCD26168, LCD261616 V e r . 0 41309, 102609 Copyright © 2009 Clover Electronics U.
2.
Conte nts 3 CONTENTS AB OU T TH IS MA NU A L .. .................. .................. ........ ...... .................. ............... .................. ...... ... ....... 9 1.U NP AC KIN G . .................. .................. ............... ..
Stand-a l one DVR Instruction Manua l 4 6-6.1. FULL SCREEN....... ............ ..................... ..................... ................... ........... .................. .................. 37 6-6.2. SPLIT SCRE ENS .......... ..................... .
Conte nts 5 6-1 1. COPY ........... ........................... ............................ ........................... ....................... .......... 6 8 6-1 1.1 . Copying devices .......... ............ ..................... ...................
Stand-a l one DVR Instruction Manua l 6 7-6. RECORD................. ........................... ............................ ....................... .......................... 101 7-6.1. Record I CON Display ...... ............ ..................... .
Conte nts 7 8-4.2. Connection ........ ............ ..................... ..................... ..................... ................... ........ ........... .......... 142 8-4.3. Capture ............ ..................... ................... .......
Stand-a l one DVR Instruction Manua l 8.
9 About this manual This is the Instruction Manual for 26” Wide TFT -LCD monitor built-in 16Ch DVR system, Model LCD26164, LCD26168 and LCD261616. The last digit(s) of the model numbers (e.g.: 4, 8 and 16) represent the number o f cameras included in the system.
Stand-a l one DVR Instruction Manua l 10.
11 1. Unpacking Care should be taken when unp acking to avoid damaging the system. Please check that the following items are in cluded: Note : Contact your dealer immediately if any components are missing.
Stand-a lone DVR Instructio n Manual 12 1-1. 26” Wide LCD Panel Built-in 16 Ch Digital Video Recorder LCD261 64 is the most reliable and functional embedded DVR system available today .
13 2. Features ▶ 26” Wide Screen - High resolution TFT -LCD 1,366(H) x 768(V ), Contrast ratio 700:1, Response time 8 msec ▶ Multi Functional Record - Powerful, multiple Record Modes available: Manual (Continuous), Timer , and Motion Detection Recording.
Stand-a lone DVR Instructio n Manual 14.
15 3. What to do at the time of Installation The system should be inst alled in the following order; 1. Make sure all the required hardware is availa ble. - 26” wide TFT -LCD monitor built-in 16 Ch DVR - Up to 1 6 camera s capa city (Refer to the retai l box for t he number of camer a included in the system).
Stand-a lone DVR Instructio n Manual 16.
17 4. Specifications I T E M DESCRIPTIONS T elevision System NTSC P AL Refresh Rate 60 fields/sec 50 fields/sec Video Resolution 720x480 720x576 Video Inputs 8- 6pin Din Cameras and 8- BNC Cameras Video Input Signal Composite 1.0 Vp-p 75 Ohms Video Output 1- Composite output VIDEO SIGNAL Video Output Signal Composite 1.
Stand-a lone DVR Instructio n Manual 18 Display 26” TFT LCD ac tive matrix Pixel Pitch 0.4215 mm Active Display Ar ea 575.76(H) x 323.71(V) mm Display Colors 16.
19 5. Installation CONTENTS 5-1. CONTR OLS AND CONNECT ORS ........... ........................... ............................ ................... 20 5-2. NOTE FOR INST A LLA TION ................ ............................ ........................
Stand-a lone DVR Instructio n Manual 20 5-1. Controls and Co nnectors z Front [ Fig. 5-1 Front /Side View] POWER LED 8 9 REMOTE CONTROL SIGNAL RECEIVER 1 2 3 4 5 6 7.
5. Installation 21 1. REC Key - Press this key to start recor ding. - In order to stop recording, press this key again or click the REC button on the MENU w ind ow and then the following message will be appeared. Click the OK button or press the ENTER key.
Stand-a lone DVR Instructio n Manual 22 z Rear [Fig 5- 2 Rear Vie w ] POWER INPU T & POWER SWITCH CAMERA IN EACH 12VDC. MAX 0.25A. 3W CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 SLAVE V / O A / O ETHE.
5. Installation 23 5-2. Note for Installation Install the system according to the instructions described in this manual. The 26” LCD monitor built-in 16Ch DVR and Indoor Cameras are designed for indoor us e and s hould not be used ou tdoors.
Stand-a lone DVR Instructio n Manual 24 5-3. System Connection [Fig 5-3 System Connect i on].
5. Installation 25 5-4. Installation 5-4.1. Camera Connection ▫ Connection of 6pin MINI DIN Came r as Connect the supplied cameras to the Camera Input (6p i n mini DIN jack) on the back of the system as shown in [Fig.
Stand-a lone DVR Instructio n Manual 26 5-4.2.1. Connection of Composite M onitor If ne cess ary , connec t the compos ite Video Outp ut (yel low RCA ) and Audi o Outp ut (whi te RCA) to Video IN and Audio IN on a composite monitor or TV (RCA c able: not included).
5. Installation 27 5-4.4. RS485 Connection ▫ Connect the cable to the “RS485 PORT” on the terminal block of the system. Refer to [Fig 5-7 ] for connection of Connector PIN 5-4.5 Connection to an Ethernet Net work (Optional) ▫ Connecting the cable to Ethernet.
Stand-a lone DVR Instructio n Manual 28 CAMERA IN EACH 12VDC. MAX 0.25A. 3W CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 SLAVE V / O A / O ETHERNET 12345 678G ALARM IN RS485 ALARM OUT - + GND N/O COM N/C CH 9 CH 10 CH 11 CH 12 CH 13 C H 14 CH 15 C H 16 5-4.
29 6. How to operate CONTENTS 6-1. GENERAL INFORMA TION .... ....................... ............................ ........................... ......... 31 6-2. OPERA TING INTERF ACE ....................... ............................ ................
Stand-a lone DVR Instructio n Manual 30 CONTENTS 6-7.4. LIVE AUDIO ......... ..................... ................... ............ ................... ........... ................... ............ ...... 41 6-7.4.1. COMMUNICA TION BETWEEN MO NITOR AND CLIENT COMPUTER VIA INT ERNET .
6. How to Operate 31 6-1. General Information ▫ Y ou can operate a ll functions of the system by use of the buttons located on the side panel, remote controller and a mouse. Additionally , you c an remotely control this unit via RS485 or the Ethernet port located on the back of the unit.
Stand-a lone DVR Instructio n Manual 32 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the side p anel or buttons on the remote controller and clicking th e mouse. A lot of users mostly prefer to use a mouse on these kinds of products such a s DVRs, computers and computer-a ided devices.
6. How to Operate 33 6-3. IR Remote Controller 1. PO WER / STANDBY 2. REC 3. STA TUS 4. ZOOM 5. FREEZE 6. No.1~ 16 Channel (Fu ll S creen) o r I R I D N u m b e r 7. Disp lay format (Split) 8. IR I D Set 9. MENU 10. E SC 11. UP 12. DOWN 13. L EFT 14. RI GHT 15.
Stand-a lone DVR Instructio n Manual 34 6-4. Power On/Off 6-4.1. POWER ON On the rear p anel: T urn on the POWE R switch on the rear p anel (See Fig.5-2 ). The LED on th e front panel is lit when the POWER sw itch is ON. By S t and-b y Power Mode Button Press this button on the side panel (See Fig.
6. How to Operate 35 ▫ Press the ENTER ( ↵ ) button to tu rn the power OFF . By clicking the mouse : ▫ Right-click on the screen in the live mode to display the MENU window. ▫ Click the POWE R OFF button on the MENU window (See Fig.6- 3 ) and then the me ssage (See Fig.
Stand-a lone DVR Instructio n Manual 36 6-5. Menu Windo w Right-click on the screen in the LIVE or the RECORD mode and then the MENU w i ndow will be appeared as shown in Fig.
6. How to Operate 37 6-6. Display Screen 6-6.1. FULL SCREEN [Fig.6-5 FULL screen] RECO RD ICON CURRENT TIME AUDIO ICON COPY IC ON SE Q UENCE ICON CAMERA TI TL E LIVE AUDIO.
Stand-a lone DVR Instructio n Manual 38 6-6.2. SPLIT SCREENS FULL SCREEN QUAD SCREEN SEQUENCING SCREEN 16 SPLI T SCREE N 4page SEQUENCING SCREEN 2page SEQUENCING SCREEN 9 SPLIT SCREEN.
6. How to Operate 39 6-7. LIVE 6-7.1. FULL SCREEN ▫ A Full SC REEN is avail able in t he LIV E mode o r the RE CORD m ode. ▫ Click on a certain camera’s screen in the LIVE mode or in the RECORD mode, then a FULL SCREEN will be disp l ayed. ▫ Click the FULL screen to re turn to the SPLIT S CREEN.
Stand-a lone DVR Instructio n Manual 40 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mod e. Each of the channels will be d i splayed in sequence and t he dwell time can be adjusted in the camera set up menu (Refer to 7-4.
6. How to Operate 41 6-7.4. LIVE AUDIO ▫ Setup LIVE AUDIO when the system is not connected through the DvrMaster or I nternet Expl orer an d the OS D is turn ed ON. ▫ If cameras (up to 16 cameras) have audio fun ction, it will sound in the live mode.
Stand-a lone DVR Instructio n Manual 42 6-7.4.1. COMMUNICATION BETWEEN MONITOR AND CLIENT COMPUTER VIA INTERNET ▫ This system is normally in listening mode between the LCD monitor and your comput er through the Internet (DvrMaster or Internet Explorer).
6. How to Operate 43 6-7.5. ZOOM The image on the scre en will be zoo m ed up to 2 tim es when the ZOOM button is clicked in the LIVE mode (This function is avai lable on the full screen mode only). ▫ Right-click on the screen in the LIVE or the RECORD mode and the MENU w i ndow will be appea red as shown in Fi g.
Stand-a lone DVR Instructio n Manual 44 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click th e OSD button on the MENU w i ndow to tur n the OSD (On Screen Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared.
6. How to Operate 45 6-7.7. PAN / TILT ▫ Click the PAN/TIL T butt on on the MENU window in the LIVE mo d e to access the PAN/TILT came ras. ▫ Click the (EXIT) button to return to th e MENU window.
Stand-a lone DVR Instructio n Manual 46 ▫ Channel Selection and Sc r een Convers ion To change a channel, press the CHANNEL button on the remote controller or click the CHANNEL butto n on the [ Fig.6-16 PAN /TILT CONT ROL window]. It will b e converted a full screen.
6. How to Operate 47 ▫ PRESET It is a function to preset the PTZ camera(s) which you wish to monitor frequently. Pres et Setu p - Select a position of camera you wish to preset and click the SET button in Fig.6-1 6-1. - Click the number( s) for the current position of came ra.
Stand-a lone DVR Instructio n Manual 48 6-7.8. SYSTEM STATUS ▫ Click the SY S TEM STAT US button on the MENU window to see the system status as shown below (Fig.6-17). ▫ Click th e (EXIT) button to return to the MENU window. [Fig.6-18 SYSTEM ST A TUS window] [Fig.
6. How to Operate 49 6-7.9. POWER LOSS LISTS The lis t indica tes the time/ date when the syst em powe r is turne d OFF. ▫ Click the POWER LOSS LISTS button on the SYSTEM STATUS window to view the POWER LOSS LISTS. ▫ Each of the pages contains 10 lists.
Stand-a lone DVR Instructio n Manual 50 ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the POW ER LOSS LISTS will b e deleted. T o cancel, click the CANCEL button [Fig.
6. How to Operate 51 6-7.10. VIDEO LOSS LIST The list indicates the video los s channe l and the time / date when the video signal is disconnected. ▫ Click the VI DEO LOSS LISTS button on the SY S TEM STATUS window to view the VIDEO LOSS LISTS. ▫ Each of the pages contains 4 lists.
Stand-a lone DVR Instructio n Manual 52 ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click t he OK bu tton, the VIDEO LOSS LI STS will be deleted. T o cancel, click the CANCEL button [Fig.
6. How to Operate 53 6-8. VIDEO ENHANCE ▫ Click the DISPLA Y button in the MENU window to enhance the picture quality on each of channels (Contrast and Brightness) and VGA outp ut ( Contrast, Brightness and Saturation). The VIDEO ENHANCE menu will show up (See Fig.
Stand-a lone DVR Instructio n Manual 54 6-8.1. CAMERA INPUT CONFI G (CONTRAS T / BRIG HTNESS) ▫ Click a CAMERA INPUT button in the VIDE O ENHANCE menu. ▫ The CONTRAST and BRIGHTNESS sliders will be displa yed along with camera pictur e as shown in Fig.
6. How to Operate 55 6-8.2. VGA OUTPUT CONFIG (SCALE / CONTRAST / BRIGHTNESS / SATURATION) ▫ To Setup the SCALE / CONTRAST / BRIGHTNESS / SATURA TION of VGA Output, click the VGA OUTPUT in the VIDEO ENH ANCE menu and then the VGA ENHANCE menu will dis play as shown i n Fig.
Stand-a lone DVR Instructio n Manual 56 6-9. Record This system provides W atchdog function. When power goes off during recording and the power turns on, the system w i ll automatically start recording. 6-9.1. Manual (Continuous ) recording ▫ Click the SETUP icon on the MENU window in the LIVE mode.
6. How to Operate 57 The MOTION ( ) o r SENSOR ( ) as shown in Fig.6-29 should be turned ON in this recording mode. ▫ Press the RECORD button on the side pane l o r click the RECORD icon on the MENU win dow . 6-9.3. Timer Recording ▫ Click the SETUP icon on the MENU window in the LIVE mode.
Stand-a lone DVR Instructio n Manual 58 6-9.4. Timer Event Recording ▫ Click the SETUP icon on the MENU window in the LIVE mode. ▫ Click the RECORD bu t ton in the SETUP menu and the RECORD w indow will be displayed. ▫ Select the TIMER RECORDING ( ) between the MANUAL RECORDING ( ) and the TIMER RECORDING ( ) as shown i n Fig.
6. How to Operate 59 [Fig.6-33 Hour/Minute S electi on T able] 6-9.5 Audio Recording ▫ Click the Audio Re cording button, or i n the RE CORD m enu as shown i n Fig. 6- 34. If the “ O ” is sele cted, the corresponding channel’s audio will record along with video signals.
Stand-a lone DVR Instructio n Manual 60 6-9.7. Recording Icons The Recording Icons depends on recording modes are displayed in the upper left hand corner of the screen. ▫ To turn the Recordin g Icon OFF, click the DISPLAY ON in the RECORD menu and then it will be turned OFF.
6. How to Operate 61 6-10. REPLAY 6-10.1. QUICK REP LAY It is available only by pressing the QICK SEARCH button on the remote controller. ▫ Press the PLAY b utton, and th e recent recorded list will be played. 6-10.2. REPLAY ▫ Click the REPLAY icon on the MENU window , then the REPLAY window as shown in Fig.
Stand-a lone DVR Instructio n Manual 62 6-10.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DVD-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding devices will be displayed as shown in Fig.
6. How to Operate 63 ▫ Select the hour on the S tart T ime Select Window (See Fig.6-40) by clicking the mouse on the Hour (0 – 23 hour) you wish to start to play . The green a ctive buttons indicate the HOUR that recorded data exists, and the red active buttons indicate the sele cted S tart HOUR.
Stand-a lone DVR Instructio n Manual 64 6-10.2.3. Replaying Replaying st art time set-up can be possible within a recording time e xtent. ▫ Replay buttons (NORMA L / MOTI ON / SENS OR) NORMAL PLAY: Click the button to play all the recorded data. MOTION PLAY: Click the button to play the record ed data b y MOTION only .
6. How to Operate 65 ▫ How to control the buttons while replaying ① Sear ch Slider It is possible to playback by clicking the slider on the bar and dragging it. ② PLA Y / P AUSE Click the but ton to paus e. Click the bu tton to repla y when in the pau se mo de.
Stand-a lone DVR Instructio n Manual 66 ⑤ S peaker ON / OFF Turn speaker ON or O FF . ⑥ Sp e a k e r Vo l u m e Adjust the Audio Volume by clicking the ▲ or the ▼ button when the AUDIO is t urned ON. 6-10.2.4. Disappeara nce of Replay control buttons During replaying, the replay control buttons appear on the bottom of the screen.
6. How to Operate 67 - Click the mouse on one out of chann els during replaying to view a full screen. - Click the mouse on the full screen during replaying to return to the split screen.
Stand-a lone DVR Instructio n Manual 68 6-11. COPY ▫ Click the COPY icon on the MENU w i ndow, and the COPY window as shown in Fig.6-46 will be displayed.
6. How to Operate 69 ▫ Connect the USB devices to the DVR ▫ Click the SET UP icon on the MENU w i ndow, and the SETUP menu will be displayed. ▫ Click the DI SK MANAGER in the SETUP menu, an d the DISK MENAGER will be displayed. ▫ Click the mo use on the USB button in th e DISK MANAGER, and you will be asked.
Stand-a lone DVR Instructio n Manual 70 ① All channe ls, HOUR se lection button. Click the arrow button in the upper lef t corner as s hown in Fig.6-48 to set the full extent of the recording and all the channels simultaneously . ② HOUR selection button Select the sta rt time to copy by clickin g the mou se on HOUR (0-23: in the military hour).
6. How to Operate 71 By using the S t art/End set-up bar: The starting time to cop y can also be set by clicking th e slider on the bar and dragging it or just cli ck the bar . 6-11.3. Set the Copy End Time (Copying e xtent) Refer to the above explanation (See section 6.
Stand-a lone DVR Instructio n Manual 72 6-11.4. Copying the recorded da ta during replaying The system, LCD26164 allows users to copy the recorded data during replaying. ▫ Start replaying (See section 6-10). ▫ Right-click on the replaying screen, then the COPY DATA screen will be displayed (See Fig.
6. How to Operate 73 ▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See section 6-11.1). Sele ct COPY Mode On ly when the device and media are ready to copy , the Rea dy on the corresponding device and media will be displayed. USB COPY Save the recorded data in USB Device.
Stand-a lone DVR Instructio n Manual 74 ▫ As soon as one of the above buttons is clic ked, cop yi ng will star t along with displaying the icon shown in Fig.
75 7. SETUP 7 CONTENTS 7-1. SETUP ................ ........................... ....................... ........................... ............................ 7 8 7-2. SYSTEM ....................... ........................... .......................
Stand-a lone DVR Instructio n Manual 76 CONTENTS 7-4. CAMERA ............ ........................... ....................... ............................ ........................... . 92 7-4. 1. C AMERA ON/OFF ....... ...................... .........
7. Setu p 77 CONTENTS 7-7. NETWOR K ................................ ........................... ............................ .......................... 1 1 9 7-7. 1. IP M ODE ................................. ............................ ............
Stand-a lone DVR Instructio n Manual 78 7-1. SETUP It is possible to set up the menus in the LIVE mode and partly in the RECORD mode. ▫ Click the “SETUP” button on the MENU window and the SETUP menu will be displayed. ▫ Click th e “EXIT” button to return to the previous mode.
7. Setu p 79 7-2. SYSTEM ▫ Click the “SYS TEM” bu tton in the SE TUP m enu, and the SYS TEM menu s hown i n Fig.7 -3 will be displayed. ▫ Click th e “EXIT” button to return to the SETUP menu.
Stand-a lone DVR Instructio n Manual 80 7-2.1. SYSTEM NAME ▫ Click the “SYSTEM NAME” button in the SYSTEM menu, then the On Screen Keyboard will display as shown in Fig 7-5. ▫ Delete the existing SYSTEM NA ME with the button on the On S creen Key board.
7. Setu p 81 7-2.2. LANGUAGE ▫ Click the “LANGUAGE” button in the SYST EM men u, then the LANGUAGE submenu will display. ▫ Click one of L anguages among English, Korean, Chinese, Japanese, Russian, Finish, Spanish, Portuguese and German. ▫ Click th e “EXIT” button to return to the SYSTEM menu.
Stand-a lone DVR Instructio n Manual 82 hour/minute/second selection table by clicki ng the mou s e. ▫ DATE FORMAT There are three fo rm ats to display th e time and date as follows. • MM / DD / YYYY: For U.S .A. • YYYY / MM / DD : For Asian cou ntries.
7. Setu p 83 7-2.4. SYSTEM CONFIG ▫ Click the “SYSTEM CONFIG” button in the SYSTEM m enu, and then the SYSTEM CONFIG menu will be displayed (See Fig.
Stand-a lone DVR Instructio n Manual 84 7-2.4.1. FACTORY DEFAULT ▫ Click the “ FACTORY DEFAULT ” b utton in the SYSTEM CONFIG menu, and you will be asked as shown in Fig.7-15. ▫ Click the “OK” button in Fig.7-15 to rese t to the Factory Defa ult Values, and then the system w ill save the factory default valu es (settings).
7. Setu p 85 7-2.4.2. LOAD CONFIG / BACKUP CONFI G You can save up to four different settings in the B ACKUP CONFIG and load the file s in the LOAD CONFIG to ch ange the settin gs to the system. ▫ LOAD CONFI G This function is to lo ad the changed settings to the syste m.
Stand-a lone DVR Instructio n Manual 86 ▫ BACKU P CONFI G This function is to save the c urrent settings to load the se ttings to the system. Sa ve the current settings in the BACKUP CONFI G in order to load it to the syste m in the near future whenever you change the settings.
7. Setu p 87 7-2.5. PASSWORD ▫ ON/OFF Select ON or OFF b y clicking the mouse. If the ON is se lected, the password has to be entered to get in to the SETUP mo de, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the DVR Maste r .
Stand-a lone DVR Instructio n Manual 88 7-2.6. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on each of the syste m s.
7. Setu p 89 7-2.7. FIRMWARE UPDATE There are two ways to update the firmware through USB memory and the DvrMaster (GUI). We recommend users to update the firmw are only in the LIVE mode. ▫ By USB memory - Format the USB w ith your computer and save the firmware file on it (not including folder).
Stand-a lone DVR Instructio n Manual 90 7-3. DISK MANAG E R ▫ Click th e “ ” button in the SETUP menu and the DISK MANAGER w i ndow will be displayed (See Fig.
7. Setu p 91 7-3.1. HDD WRITE FAIL If HDD is in full and the OVERWRITE on the HDD is turned OFF in the re c ording mode, the system will activate the relay output (See section 5-4.3) for a siren or other device. ▫ Click the HDD WR ITE FAIL button in the DISK MANAGER w indow and select RELAY 1 OUT or DISABLE.
Stand-a lone DVR Instructio n Manual 92 7-4. CAMERA ▫ Click the “C AMER A” butt on in the SETUP menu an d the C AMERA m enu wil l be dis playe d (See Fig.7-29). To change the settings in the CAMERA menu, stop recording by clicking the RECORD icon on the MENU window.
7. Setu p 93 7-4.1. Camera ON/OFF ▫ Click on each of the channels to sele ct the “ O ” or “ X ” in the CAMER A menu. If the “ O ” is selected, the co rresponding video channels (CAM 01 thro ugh CAM 16) will be displayed on the screen.
Stand-a lone DVR Instructio n Manual 94 7-4.3. Buzzer In order to a l ert u sers, the Buzzer will sound at that time video sign al lost. ▫ Click on each of the channels you wish to turn th e buzzer “ON” or “OFF”.
7. Setu p 95 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT button on the corresponding channels in the CAMERA me nu, then the PAN/TILT window will be displayed as shown in Fig.7-36. ▫ Click the (EXIT) button to return to the CAMERA menu. [Fig.7-35 P AN/TIL T button] [Fig.
Stand-a lone DVR Instructio n Manual 96 ▫ Pan/Tilt Vendor sele ct Click the “PAN/TILT” button in the PAN/TILT w i ndow, then the vendor lists will show up.
7. Setu p 97 ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT w i ndow and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps on the Baud Rate pop-up window by clicking the mouse.
Stand-a lone DVR Instructio n Manual 98 ▫ Stop Bits Click the “STOP BITS” button in the PAN/TILT window and select 1 or 2 on the Stop Bits pop-up window by clicking the mouse.
7. Setu p 99 7-4.6 Display ▫ Click the DISPLAY button in the CAMERA menu and select the ON or OFF. If the “ON” is selected, the camera na m e (camera title) in th e LIV E mode will be displayed on the screen. If the “OFF” is selected, th e camera name (camera title) in the LIVE mode won’t be displayed.
Stand-a lone DVR Instructio n Manual 100 7-5. AUDIO ▫ Click on the AUDIO b utton in the SETUP menu and then the AUDIO men u will be displayed on the screen. ▫ Click th e (EXIT) button to return to the SETUP menu. 7-5.1. Microphone Volume ▫ Adjust au dio volume by clicking the ▲ or ▼ button.
7. Setu p 101 7-6. RECORD ▫ Click the “RECORD” button in the SETU P menu and then the RECORD menu will be displayed as shown in Fig.7-54. ▫ Click the UP/DOWN button on the right hand side of the RECORD menu to switch the page. ▫ Click th e (EXIT) button to return to the SETUP menu.
Stand-a lone DVR Instructio n Manual 102 7-6.2. All Manual / Timer recording button ▫ Click th e All Manual / T imer recording button in the RECORD menu, then the All Manual / Timer recording button will be d isplayed as shown in Fig.
7. Setu p 103 7-6.3. All Motion ON / OFF, Sensitivity Setting ▫ Click the butt on in the REC O RD menu, then the ALL MOTION setup pop-up w indow will be displayed as show n in Fig.7-59. ▫ By click ing the mo use, s elect the on the pop-up window (See Fig.
Stand-a lone DVR Instructio n Manual 104 7-6.4. All Sensors ON / OFF ▫ Click the button in the RECORD menu, then the ALL SENSOR setup pop-up window will be displayed as show n in Fig.7-62. ▫ By click ing the mo use, s elect the on the pop-up window (See Fig.
7. Setu p 105 [Fig.7-64 Record S ize pop-up window] 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Second s: Recording Speed) button on each of the channels in the RECORD menu, then the Recording Speed pop-up window will be displayed as shown in Fi g.
Stand-a lone DVR Instructio n Manual 106 30 25 15 12 10 8 7 6 5 5 3 3 2 2 1 1 NTSC OFF PA L OFF 7-6.7. Recording Quality ▫ Click the QUALITY bu tton on each of the c hannels in the RE CORD menu, then the QUALITY pop-up window will be displayed as show n in Fig.
7. Setu p 107 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording ), which ke eps record ing continuo usly if the OVERWRITE is set ON in the DISK MANAGE menu.
Stand-a lone DVR Instructio n Manual 108 7-6.9. Recording by Motion Detection When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for e ach of the channels) and de tected motion of objects, the system begins recording automatically.
7. Setu p 109 ▫ Pre- Alarm T ime Set up Allows y ou to record a se ction of video just pr ior to Mo tion or Sensor activation. Click the mouse on the PRE in the MOTION me nu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.
Stand-a lone DVR Instructio n Manual 11 0 ▫ Region The Mot ion De tect ion Are a displ ays in blue on t he scr een, an d it tu rns to doubly-boxes when the motion is detected. The white color on the screen represents none of detection area. There are three kinds of REGION settings as below .
7. Setu p 111 By All Set Right-click on the setting window for Motio n Detection Area (Fig.7-75), and then the pop-up setting window for Motion Detectio n Area will be displayed (Fig. 7-76). By cl icking the mous e, sel ect the button on the pop-up settin g window.
Stand-a lone DVR Instructio n Manual 11 2 - All Clear Right-click on the setting window for Motion Detection Area (Fig.7-75), and then the pop-up setting wind ow for Motion Detecti on Are a will b e displayed (Fig. 7- 76). By clicking the mouse, select th e button on the pop- up settin g window in order to clear the Motion Detect Area.
7. Setu p 11 3 By Window Se t Right-click on the setting window for Motion Detection Area (Fig .7-75), and then the pop-up setting window for Motion Detectio n Area will be displayed (Fig. 7-76). By clic king the mouse, select the button on the pop-up setting window.
Stand-a lone DVR Instructio n Manual 11 4 - Window Cle ar Right-click on the setting window for Motio n Detection Area (Fig.7-75), and then the pop- up setting window for Motion Detection Area will be displayed (Fig.
7. Setu p 11 5 By Each Ce ll Right-click on the setting window for Motio n Detection Area (Fig.7-75), and then the pop-up setting window for Motion Detectio n Area will be displayed (Fig. 7-76). By cl icking the mous e, sel ect the button on the pop-up setting window.
Stand-a lone DVR Instructio n Manual 11 6 Note : Please pay attention to the follow i ng directions in order to use the Motion Detection function properly: • Adjust the sensitivity level and motion area to fit your requirements. • Do not use this function in an area where many objects are co ntinuously moving.
7. Setu p 11 7 7-6.10. Recording by Sensor (PIR Sensor) ▫ Click the mouse on the button for each of the channels in the RECORD menu, and then the SENSOR men u will be di splayed on the scree n as shown in Fig. 7-84. ▫ Click th e (EXIT) button to return to the RECORD me nu.
Stand-a lone DVR Instructio n Manual 11 8 ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click the mouse on the PRE in the SENSOR menu and choose one of the values among 1 through 30 seconds in the pop-up table by clicking.
7. Setu p 11 9 7-7. NETWORK ▫ Click the “NETWOR K ” button in the SETUP me nu, and th en the NETWORK menu will be displayed on the screen as shown in Fig.
Stand-a lone DVR Instructio n Manual 120 7-7.2. GATEWAY, S UBNE T, IP ADDRESS ▫ Click the GAT EWAY / SUBNET / I P ADDRESS butto n in the STATIC IP MODE, then the On Screen Keyboard will appear.
7. Setu p 121 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the ne t work viewer. I t can be set from 1 to 65535 values. ▫ Click the PORT button in the Ne twork menu , then the On Screen K eybo ard will show up.
Stand-a lone DVR Instructio n Manual 122 7-7.5. MNS (MAC NAME SERVER) As a sort of DDNS, two servers in our company are being operated so that our client can access DVR with a Dynamic IP address. If one of servers stops operating, the other one will automatically start w orking.
7. Setu p 123 ▫ IP ADDRESS / PORT DO NOT CHANGE THE IP ADDRESS AND PORT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO ACCESS YOUR DVR WITH A DYNAMIC IP ADDRESS. IF Y OU CHANGE THEM, Y OU CAN’T NOT ONLY USE OUR MNS (MAC NAME SERVER), BUT ALSO YOUR NETWORKING WILL BE DISCONNECTED.
Stand-a lone DVR Instructio n Manual 124 ▫ SERVER - Choose the SERVER button in the DDNS menu by clicking the mou s e or pressing the buttons on the remote controller and select the DYNDNS.ORG (or NO-IP.ORG) provided by www.dyndns. org (or www .no-ip.
7. Setu p 125 7-7.7. HOW TO SETUP AND USE THE DDNS 7-7.7.1. Router. It has to be set as a virtual server (or port forw arding) in order to utilize the DDNS. There are a lot of manufacturers on the market. Please read the provided manual thoro ughly before setting or visit our website at www .
Stand-a lone DVR Instructio n Manual 126 7-7.8. EMAIL NOTI FICATION ▫ Email notification e nables to notify eve nts (sen sor, motion, video loss, powe r on/off, power loss, record on/off, record fail, replay or copy start/stop) by sending emails to one or two email accoun t s.
7. Setu p 127 ▫ EMAIL ADDRESS SETUP - Click one of email address bo xes and then the On Screen Keyboard will show up as shown Fig.7-105. - Delete the curre nt email address with the button a n d enter an email address by using the On Screen Keyboard.
Stand-a lone DVR Instructio n Manual 128 ▫ EVENT Setu p - Click the check boxes below to choose the events you need. - To delete, click the check box again.
7. Setu p 129 Note : If the motion is selected in Fig.7-108, you may receive numerous ema ils from the DVR systems due to a couple of factors such as continuous moving objects, a strong and changing lighting source, low resolution and noises of cameras.
Stand-a lone DVR Instructio n Manual 130.
131 8. Remote Host Program 8.
Stand-a lone DVR Instructio n Manual 132 CONTENTS 8-1. REMOTE PROG RAM OVER VIEW ................... ....................... ........................... ............. 133 8-2. INST ALLING TH E PROGRAM TO PC ...... ........................... .........
133 8-1. Remote Program Overvi ew The Remote Host Program allow s you to view live video, search archived video, control PTZ cameras and to set up the exact same menus as the DVR does. The DVR system can have up to 10 simultaneous Remote Connections. Each user can performs on the DVR system and will not af fect the other users.
Stand-a lone DVR Instructio n Manual 134 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as f ollow s . How to install the pro gram 1. Start the operating system (Window s 2000/XP/VISTA). 2. Insert the program CD into CD-ROM drive.
135 8-3. Internet Explorer When you are trying to use this function, it is high ly recommended that the pa s sword should be turned ON in the SYSTEM menu not to enab le unauthorized personnel to access your DVR system (See section 7-2.5). Up to 10 users can remo tely access yo ur DVR with the H OST N A ME.
Stand-a lone DVR Instructio n Manual 136 [Fig.8-3 DVR Master - Windows Internet Explorer] • Click on the following me ssage. This site wants to inst all the following add-on: ‘DVR Master’ from ‘Clover Electron ics USA ’. If you trust the website and the add-on and want to insta ll it, c lick here….
137 8-4. Remote Host [Fig 8-5. DVR Mast er] ○ 12 ⑧⑨⑩ ○ 16 ○ 13 ○ 14 ○ 15 ④ ⑥ ⑤ ⑦ ① ② ③ ⑪.
Stand-a lone DVR Instructio n Manual 138 Table. Desc rip t ion of Rem ote Host Progr am But ton ① Minimization Button ② Close But ton ③ Current Time ④ Connection But ton ⑤ Setup Button ⑥ Player Executio n Button ⑦ Captur e Button ⑧ Multi- Mode ⑨ Termi nal Mode ⑩ E-map Butt on ⑪ Splits the screen in 4, 9 & 16ch.
139 8-4.1. Setup ① Version number It represents the current version number of the Firmware. ② Copy Refer to Section 8-4.10 in regards to copying methods after selecting one between the Quick Copy a nd the Live + Co py.
Stand-a lone DVR Instructio n Manual 140 ③ Network Image ▫ Size Choose a Size (Resolution) among D1, Half D1 and CIF you wish to displa y on the DVR Master by clickin g the mouse. This setting does not affect the DVR. ▫ Quality Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the DVR Master by clickin g the mouse.
141 [Fig.8-7 Firmware Files].
Stand-a lone DVR Instructio n Manual 142 8-4.2. Connection There are two ways to access the DVR through the DVR Master as follow s. ▫ With Set Direct setting - Click the “CONNECT” button on the DVR Master and the “Connect Dialog menu” as shown in Fig.
143 - Choos e a Dom ain Nam e in the N ame Li sts and t hen clic k the “C ONNECT ” butt on in or der to access the DVR . - T o register the Domain name (Host Na me), refer to section 7-7.
Stand-a lone DVR Instructio n Manual 144 8-4.4. Status If the Status button on the DvrMaster is selected by clicking the mouse, the DvrMaster displays the DVR’s status related to connections of cameras, s ensors, relay outputs and remaining HDD (Hard Disk Drive) capacity available for re cording.
145 8-4.5. Replay It is possible to replay the recorded data from the DVR system by using the Replay button in Fig.8-10 in the Multi mode only (refer to section 8-4.9.2). - Click the Replay button as shown in Fig.8-10 to playback the recorded data from th e DVR system, and then the Replay T ime Setup Window will be displayed.
Stand-a lone DVR Instructio n Manual 146 ▫ Play back C ontro l Playba ck control b uttons : Button for fast rewinding up to 128 times by repea tedly pressing. : Button for viewing previous frame in still image. : Play button. : Button for viewing the next frame in still image.
147 8-4.6. COPY It is possible to copy the recorded data fro m the DVR system to a client PC by using the Copy button in Fig.8-13 in the Multi mode only (refer to section 8-4 .9.2). - Click the Copy button as shown in Fig.8-13 to copy the recorded data from the DVR system to a PC, and th en the Copy Time S etup Window w ill be displayed.
Stand-a lone DVR Instructio n Manual 148 “ALL” in yellow represents that all the cameras are se lected. The camera channel number(s) in yellow repr esents that the corresponding channel(s) are selected . - Click the Copy ( ) button and th en the cop ying progressive bar as shown Fig.
149 8-4.7. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the DvrMaster as shown Fig.8-16 a nd the current screen size will be enlarged to fit th e monitor’s scr een size, but the re solution will be lowered. ▫ Click the “FULL SCREEN” b utton again to go back to the NO RMAL SCREEN.
Stand-a lone DVR Instructio n Manual 150 8-4.8. Speaker / Microphone Buttons of Remote Host Program ① Audio Input channel selection: Select the same audio channel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking the mouse.
151 8-4.9. Connection mode There are two kinds of connection mode (See Fig.8-19) on the DvrMaster . Select one of them by cl icki ng the mo use dep endin g on you r appli catio n.
Stand-a lone DVR Instructio n Manual 152 8-4.9.2. Multi mode It is impossib le to control (Recording on/o ff, Se tup, System Status, Display and OSD) the DVR system in the Multi mode except Replaying and Copying (See section 8-4.5, 8-4.6 on page 145-147), but th e image o f channe l 16 will alw ays display on the monitor and the DvrMaster.
153 8-4.10. Copy in the Terminal mode There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the Multi mode. The recorded data will be saved in the Backup Files (Open Windows Explor.
Stand-a lone DVR Instructio n Manual 154 [Fig.8-22 Co pying in the T erminal mode] [Fig.8-23 Copy Completion ].
155 8-4.11 E-Map E-Ma p enabl es us ers to d ispla y the ca meras on the di gital ma p for bet ter m onito ring. The digital map should be a BMP f ile and you can make it (the higher resolu tion the better) or use the E-map samples saved in the E-ma p folder (See Fig.
Stand-a lone DVR Instructio n Manual 156 - To rename, right-click a saved eMap list and click “Rename” on the pop-up window as shown in Fi g.8- 27 . - To delete, right-click a saved eMap list and click “Delete eMap” on the pop-up window as shown in Fig.
157 8-4.11.3. Usage of camera position The small squares with channel numbers on the map indicate the camera position. The blue screen represents that the corresponding camera is not connected to the DVR system. - Doub le-c lick the im age t o display a full s creen.
Stand-a lone DVR Instructio n Manual 158 8-4.12 Pan / Tilt & Preset Y ou can control the PTZ camera thro ugh DvrMaste r . This featu re is basically id entical to w hat the DVR system has.
159 8-5. PLAYER [Fig.8-33 Player] Char t. Butto n of P l ayer P r ogram ① Status w indow ( Play mode, D ate, Time) ② Calendar ③ Search button for replaying ④ Convert to AVI File ⑤ Configurat.
Stand-a lone DVR Instructio n Manual 160 ① Status w indow (Play mode, D ate, Time) It indicates th e play mode , date and time . ② Calendar It shows the date currently being replayed. [Fig.8-35 Calendar] ④ Search button for Replaying - Click the Search button on the Play er and the Browse for Folder will be disp layed.
161 - Click the Conve rt AVI button on the Player and the Convert AVI w i ndow w ill be displaye d (See Fig.8-36. - Click on the SELECT butto n for Source on the Convert AVI window and th e Convert AVI window or the DVR Player will be displayed (See Fig.
Stand-a lone DVR Instructio n Manual 162 [Fig.8 - 39 Select one of the Channels] [Fig.8-40 St art Convert Button] How to play the A VI fi l es By using Windows media player: - Click the OPEN button on the Convert AVI w indow and double click one of the AVI files to play.
163 ⑤ Configuration [Fig.8-41 Configuration wi ndow] - If the “Fit to window” is sel ected in Fig.8-4 1, it w ill automatically fit to the P layer window in Fig.8-33 (720x480) even though the recorded data is CIF (360x240) in the playback mode. - If th e “Open Data Fo lder” i s clic ked in Fig.
Stand-a lone DVR Instructio n Manual 164 ⑧ Video Enhance Re fer t o section 6 -8 on pa ge 53. ⑨ Division button Select one of the following divisions while repl aying. ⑩ Playback (Replay) Speed Control Move the slider with the mouse to control the replaying speed.
165 ⑪ Search slider for replaying The s lider can be mov ed left and right by clicking the slider on the bar and dragging it or ju st click the bar to search the recorded data.
Stand-a lone DVR Instructio n Manual 166.
167 APPENDIX CONTENTS RECORDING TIME T ABLE ........................... ............................ ........................... ................... 168 FA C T O R Y DE F AUL T SETTINGS ..... ...................... ............................ .......
Stand-a lone DVR Instructio n Manual 168 Recording time table HDD : 750GB , Based on 16 cameras Recording Resolution : CI F(360 X 240) DA YS 30 fps 15 fps 10 fps 7. 5 fps 5 fps 3 fps 2 fps 1 fps (480fps) (240fps) (160fps) (120f ps) (80fps) (48fps) (32fps) (16fps) Each CH (16CH/fps) BEST 18.
169 Factory default settings (1) LIVE SCREEN 16 SPLIT OSD ON (2) TIME / DATE DISPLA Y : ON TIME FORMA T : 24 HOUR DA TE FORMA T : YYYY/MM/DD (3) LOAD / BACKUP CONFIG NONE LISTS (4) USER ACCOUNT PASSWO.
Stand-a lone DVR Instructio n Manual 170 SEQ DISPLAY DWELL : 1 SEC (8) AUDIO AUDIO 1 : RELA TED CAMER A CH 1, RECORD O FF , LEV EL 5 AUDIO 2 : RELA TED CAMER A CH 2, RECORD O FF , LEV EL 5 AUDIO 3 : R.
171 PRE : 1 sec. HOLD : 1 sec. SPOT : OFF (10) NE TWORK TYP E : DY NAMIC PORT : 1 13 SERVER 1 MOD E : DISABLE SERVER 1 IP ADDRESS : 65.60.84.25 SERVER 1 POR T : 300 SERVER 2 MOD E : DISABLE SERVER 2 IP ADDRESS : 221.149.149.1 17 SERVER 2 POR T : 300 SERVER SITE NAME : SXXX XXX (MAC ADDRESS) (11) VIDEO - CAMERA INPUT BRIGHTNESS : 128 (Ma x.
Stand-a lone DVR Instructio n Manual 172.
173 FAQ CONTENTS I CANNOT LOGIN ..... ........................... ....................... ............................ ........................... ....
Stand-a lone DVR Instructio n Manual 174 I can not login ▶ Plea s e check if the link LED of DVR and LAN port of PC are lit. ▶ Plea s e check if the IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR (Available on LIVE mode and RECORD mode.
175 Limited 1Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 1 year on parts and labor from the date of original purchase.
Stand-a lone DVR Instructio n Manual 176 How to obtain Factory Service • Original purchaser must fill out the warranty card and mail it to the factory with the model number, serial number and the date of purchase. • We will re pair or replace, and return the system to the ow ner under this limite d warranty.
An important point after buying a device Clover Electronics LCD26168 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clover Electronics LCD26168 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clover Electronics LCD26168 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clover Electronics LCD26168 you will learn all the available features of the product, as well as information on its operation. The information that you get Clover Electronics LCD26168 will certainly help you make a decision on the purchase.
If you already are a holder of Clover Electronics LCD26168, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clover Electronics LCD26168.
However, one of the most important roles played by the user manual is to help in solving problems with Clover Electronics LCD26168. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clover Electronics LCD26168 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
