Instruction/ maintenance manual of the product HDV045 Clover Electronics
Go to page of 117
1 | Pa g e INSTRUCTION MANUAL Stand-Alone 16Channel DIGIT AL VIDEO RECORDER MODEL HDV043, HDV045 V er . 01031 3 Copyright © 201 1 Clover Electronics U.
2 | Pa g e Preface This manual contains user instructions on how to operate the Di gital Video R ecording devices (D VR Unit), R emote Contr oller , Client Application, Mo bile Applicatio n and Centr al Monitorin g Software Application.
3 | Pa g e Note o f Caution – Befor e Y ou Start! Wa r n i n g C h e c k i f t h e p o w e r i s s w i t c h e d o f f b e f o r e installation or additional repair . Never plug in while the device is in operation. Other wise it m i g h t b e s e t o n f i r e o r p u t y o u a t t h e r i s k o f fire, electr ocution and damage.
4 | Pa g e When strange noise or smell is sensed, immediately plug out and send inquir y to ser vice center or seller . D o n o t i n s t a l l d e v i c e i n h u m i d p l a c e f i l l e d w i t h dust. It might be the cause o f electrocution and fire.
5 | Pa g e When HDD saving data gets old enough, video d a t a t o b e s a v e d m a y s u f f e r s o m u c h d a m a g e t h a t i t m a y b e i r r e p a r a b l e . I f s c r e e n a p p e a r s brok en while regenerating data saved in HDD , i t m e a n s H D D w o n ’ t w o r k a n y l o n g e r .
6 | Pa g e Check Components Components DVR Stand Alone Digital Video Recorder Battery 1.5V (A AA) 2 pcs. Screw For HDD mounting Software CD Manual and Client program Adapter DC 12V 6.
7 | Pa g e Ta b l e o f C o n t e n t s ▒ Chapter 1. Features & Components ▒ .................. ............... ................... ........... ........ ........... 10 1-1. Features ................................................. ...........
8 | Pa g e 3-7. Button Setup ............................................. .................................. ............................. .................................. 45 3-8. RS-485 ................................................... .........
9 | Pa g e 9-2. Calendar Search .......................................... ..................... .......................................... ............................ ... 70 9-3. Date/Time Search .................................................. ..
10 | Pa g e ▒ Chapter 1. Features & Components ▒ 1-1. Features The highly advanced and h igh-performance video recorder is desi gned to make it easier to install and use with safety.
11 | Pa g e 1-2. Name and Functi on of Front Pa nel (HDV043) [ 1 ] P O W E R L E D [ 2 ] R E C O R D L E D [ 3 ] U S B P o r t [ 4 ] M E N U B u t t o n [ 5 ] Q U A D B u t t o n [ 6 ] R E C B u t t o.
12 | Pa g e 8 Function Butt on Search Display search menu Split Mode Select split mode Sequen ce Automatic screen shif t Sc hed ule R ec ordin g Sc hed ule reco rdin g Emergency Recor ding Emerge ncy Re cording 9 Front USB P or t USB Connecting slot 10 ODD Av ailabl e to connect ODD 1-3.
13 | Pa g e Rear Port Specificat ion and Connection E xamples Power input Input at 12 volt DC with positive polarity at 5 Amp VGA (Video Graphics Array) Port VGA port uses D-subminiature or D-sub, DE-15F (E rated sized D- Sub with 15 pin Female) port.
14 | Pa g e VGA Pin Configuration Table Signal Type Pin Number Descrip tion RED 1 Red video (75 ohm, 0.7 V p- p) GREEN 2 Green video (75 ohm, 0.7 V p-p) BLUE 3 Blue video (75 ohm, 0.
15 | Pa g e Main Monitor Output Connect a monitor that supports BNC Inputs or use a “BNC Twist Lock” to Composite Video adapter if your monitor only supports Composite Video Inputs. Figure 4 Main Monitor Conn ection The display resolution for Monitor is at 720x480.
16 | Pa g e Camera Input The camera connections are the input ports fo r the video signal (s) use d with the DVR. You may use an y video source (75ohm) that outputs via a BNC connect o r ( T w i s t L o c k T y p e ) .
17 | Pa g e RS-232 Serial Connector The RS-232 COM port is used to co nnect the DVR to a PC (optiona l updating procedure) or to connect an external device lik e a D VR controller (optional). The required settings to use the RS-232 port can be config ured in the DVR settings.
18 | Pa g e Optional Alarm Sensor Extension Box There is an optional Alarm Sensor Extension Box that connects to RS-232 port provided in our DVR unit..
19 | Pa g e RS-485 Connections The RS-485 ports are used to connect external PTZ cameras to th e D V R . T h e r e i s s i n g l e available port with this DVR. E xternal controllers may be used , however you will not have the ability to control the PTZ cameras remotely if you do so.
20 | Pa g e Sensor Input Connecting the Inputs: Each alarm input can be controlled/swi tched by a device such as a motion/IR sensor, door contact sensor, and similar devi ces. Each device can either be wired as N/O or N/C (Normally Open/Normally Closed).
21 | Pa g e Figure 11 Ethernet Cable Colo r Code EIA/TIA E568B Configuration Signal Type Pin Number Description LAN Tx+ 1 Ethernet Transmit Positive LAN Tx- 2 Ethernet Transmit Negative LAN Rx+ 3 Ethe.
22 | Pa g e Figure 13 Cro ss Over Cable You may now connect directly into PC and DVR unit to communicat e directl y. Your DVR gateway address and PC’s gatew ay address must be same address. T hen you must assign TCP/IP address that belongs to same subnet address as DVR and P C.
23 | Pa g e Example 2. Connecting DVR unit to Route r This is most common connection for DVR it is advised that your DVR follow the rules of network policy (Please consult with your network administrator) . In this example we are going to assume that route r is g iving (leasing) TCP/IP address.
24 | Pa g e ▒ Quick Setup ▒ 1. Placement Step 1. Preparation Remove unit from out of the box and place it on the table top a s seen below. Figu re 16 Ta ble to p plac ement 2.
25 | Pa g e Step 2. Connect monitor to DVR unit Depending on what type of monito r you a re connection connect ei ther to VGA or BNC monitor of your choice. If you have both types of monitor you may connect both of them. Figure 18 VGA or Monitor Connection Step 3.
26 | Pa g e 3. Quick Power On Power input – connectio n port for DC 12 volt Step 1. Included DC Power adapter is located in accessory box. Step 2. Take the adapter and connect it with power cord. Step 3. Connect the DC 12V male connector to female DC 12V port.
27 | Pa g e 4. Initial Boot After turning on the DVR unit it will go into a boot sequence. At the initial boot section there is no user interaction with DVR unit however plea se obser ve to see if DVR unit is properly booting.
28 | Pa g e 6. Labeling Camera Sometime camera location may be identi fied easier by giving log ical name to the camera. Here are steps to give logical n ame label inst ead of hav ing def ault label. Here you may choose camera(s) that you want to give logical nam e an d repeat to ot her camera(s) as needed.
29 | Pa g e 7. Enable Recording Main and primary function of DVR is to record video. Below sec tion is showing how to configure all cameras to record immediately .
30 | Pa g e 8. Prepare Network Step 1. Select “Network” item on upper main category then by de fault “IP ADDRESS” tab should appear as shown on screen below. Figure 22 IP Address Pa ge Make sure that DHCP is selected i f you have a router that lease s IP address to network.
31 | Pa g e ranging from 169.254.1.0 ~ 1 69.25 4.254.255 then you have been a ssigned pseudorandom IP address and it is a indication t hat there a re no DHCP service a vailable for DVR devic e. Static IP setting is used when your ISP (Internet Service Provi der) gi ves ro utable I P the y are call Public IPv4 address.
32 | Pa g e ▒ Chapter 2. Basic Information ▒ 2-1. Menu Display It’s available to make setup with menu button on front pan el, a mouse and a remote ☞ Display Setup Menu with a front panel button There are ‘Menu’ button on the front of unit.
33 | Pa g e 2-2. Description of Icon [1] The icons on the live sc reen indica te the status. R e c o r d i n g V i d e o L o s s M o t i o n D e t e c t i o n S e n s o r [3] Status Bar 1. Display date and time 2. ER means Emergency Record ing and SR means Schedule Recording .
34 | Pa g e 2-3. Remote Controller I t i s a v a i l a b l e t o c o n t r o l e v e r y f u n c t i o n w i t h a r e m o t e . C o n t r o lling several DVRs with a remote is available.. [1] ID : Press to select a remot e controller ID in case of usin g one remote controller to multi DVRs.
35 | Pa g e 2-4. How to Set Remote Controller ID In order to use remote controller, the ID must be same both DVR and remote controlle r. By assigning DVR ID, it allows the user to control multiple DVRs w ith one remote controller. [1] Check current system ID and c an be changed by user.
36 | Pa g e 2-5. How to Display Setup Menu It is available to display menu with front panel buttons, remot e and mouse. [1] Front panel button : Push “MENU” button on the front panel.
37 | Pa g e 2-6. Zoom In/Out Magnify the image at live or pla yback. [1] How to magnify with a mouse Locate the mouse pointer on t he place you want to magnify. A nd click the left button of mouse and drag it. You can cancel by dragging wi th mouse left b utton clicked.
38 | Pa g e ▒ Chapter 3. System Configurati on ▒ 3-1. Information [1] Remote ID : Assign the ID of remote controller, so that use r can separately control multip le DVR un it with one contro ller. (ID range: 0 ~ 99) [2] Mouse Resolution : Mouse sen sitivity level can be adjusted at user’s convenience.
39 | Pa g e 3-2. Time/Date [1] Time : Set time [2] Date : Set date [3] Date format : Select a T ime/Date display format. [4] Daylight Saving Time : Set “ ON” to apply daylight saving ti me. Enter Month/Week/Day to begin an d also enter Month/Week/Day to end.
40 | Pa g e • Time server : Input the URL of server (Def ault : kr.pool.ntp .org ) • Synchronize Period : Select the period to sync ronize between DVR and ti me serv er • Power On : Try to sync once power on. • 12Hour : Try to sync every 12 hours.
41 | Pa g e 3-3. Password [1] ID : Available to register ma x 8 account(“Admin” and “User1 ~7) • admin : Administrator ID • User1~7 : User ID [Note] Default passw ord of all ID is “11111111” .
42 | Pa g e 3-4. Hard Disk As it is related to recording, i f an y setting is wrong, system error or abnormal rec ording could happen. [1] Hard Disk List : It provides the information for Hard Disk, external USB Hard Disk and format.
43 | Pa g e [6] Advanced : Select whether a H ard Disk is used as Main disk or Mirror disk. • Hard Disk 1~3 : Select with which purpose it will be used. • E-SATA : Select with which purpose it will be used. • Apply : Save the setting [Note] After setting, select “Apply” to save.
44 | Pa g e 3-6. Upgrade [1] USB (Firmware Upgrade) : In order to upgrade system firmwar e with USB memory stick, the firmware file must be saved in the USB storage first and th en insert to DVR to start USB upgrade from the menu. [2] Configuration Backup : Sav e a configuration fil e of DVR.
45 | Pa g e 3-7. Button Setup After a certain time passes, s creen is automatically locked. • Auto key lock : There is no ke y input during specific time, sys tem lo cks the button automatically. In order to unlock, input the password. ( 10 sec . 30 sec.
46 | Pa g e ▒ Chapter 4. Display ▒ 4-1. OSD (On Screen Display) [1] Camera Title : ON / OFF [2] Status Bar : ON / OFF. [3] Login Display : Select a login option • As Per Last Login : Display live image after system rebooting . • Cover All Camera : Do not display live im age after system reb ooting.
47 | Pa g e 4-2. Auto Sequence • Auto Loss Skip : If there is no video input, it skip video loss channel. • Display time : Select a display duration while sequencing (1 se c. ~3 0 sec.) [Note] Sequence doesn’t work on event pop-up. 4-3. Spot Out Control extra spot output on rear panel.
48 | Pa g e 4-4. Video Output Setup You can choose a type of video output. This model supports HMDI , VGA and composite output. [1] Video Output Setup • HDMI+VGA(S) : Set HDMI as main output and VGA as Spot Out. • VGA+Composite(S) : Set VGA as main output and Composite as Sp ot Out.
49 | Pa g e ▒ Chapter 5. Network Setup ▒ 5-1. IP Address It is the system setup for remote monitoring or backup an d it n eeds the network setup of DVR. The user must know whether their internet is dynamic IP(DHCP) o r fixed IP. Please check it to your ISP before setup.
50 | Pa g e 5-2. Notification E-Mail Setup It’s a basic setup to send E-mail, so if it is not correct, e-m ail couldn’t be delivered. So be careful to make Setup correctly. [1] SMTP Server : Enter Mail Ser v er address to use as SMTP S erv er. If you don’t know the Server address, contact a person who manages SMTP Server you us e.
51 | Pa g e 5-3. E-mail Notification Select which type of notificat ions you are going to use. Notification type : You can sele ct the type for E-mail notifica tion.
52 | Pa g e 5-4. Web Server Built-in web server make user can connect the DVR remotely on the Internet Explorer [1] ON/OFF : Sel ect ‘ON’ to use remote N/W connection through w eb.
53 | Pa g e 5-5. Free DDNS Free DDNS is used for remote connection through private DDNS se rvice. Firstly, go to http://www.dyndn s.com and create an a ccount. The n, if your system is installed with a router, you must make DM Z setting in the router setup fo r the IP your system has.
54 | Pa g e 5-6. Dual Codec Setup It i s avai lable to tr ansmi t dat a thr ough e xtra netwo rk tr ansmis sion codec. There are two ways of setting. Split Resolution is a transmi ssion mode for sp lit screen and Popup Resolution is a transmission mode for one channel full screen.
55 | Pa g e ▒ Chapter 6. Camera ▒ 6-1. Camera Title Input a camera title using by virtual keyboard. Press a space bar to change a langua ge..
56 | Pa g e 6-2. PTZ Setting [1] Channel: Select a channel [2] ON/OFF : Enable or dis able to use PTZ. [3] MODEL : Select the P TZ protocol or, model [4] ID : Select the PTZ ID. (F or more detail, refer to the ma nual of PTZ device.) 6-3. PTZ Advanced Setting [1] Reverse Control (Pan) : Set the Pan works reverse direction .
57 | Pa g e The touring number is selec table 1~16. [1] Touring number : Select the number. [2] Preset number : Select the preset number saved before. [3] Touring interva l (/SEC) : Select the touring dwell time. [NOTE] PTZ protocol selection Protocol is PTZ moving driver.
58 | Pa g e 6-4. How to Use PTZ [How to call the PTZ menu] • Mouse menu: Click the right but ton of mouse and select the ‘P TZ’. • Remote controller menu: Click the “PTZ” from remote controlle r. (1) Select PTZ Button on the remote controller • When you select PTZ button, + shape icon appear.
59 | Pa g e • PanTilt : Control the direction by the direction key in remot e controller. • Prese t : Input the preset number to be moved or saved and se lect this menu. ( P r e s e t S a v e ) ( P r e s e t m o v i n g ) • Tour : It tours as per the saved preset number.
60 | Pa g e ▒ Chapter 7. R ecord ▒ 7-1. Record Setting Set resolution, quality, rec ordi ng speed a nd audio. Each settin g affects the size and picture quality.
61 | Pa g e 7-2. Schedule Record Set schedule record per day of the week, time and channel. And setting per hour is also available. █ N (Grey) : No record █ C (Green) : Continuous record █ M (Bl.
62 | Pa g e • All Ch to Copy : Copy the curre ntly set recording schedule to a ll channels. 7-3. Holiday Record Set holiday record with different option. [1] 7 different holiday setup can be made. After s electi ng re cord t ype fro m H1 to H7, s et ti me wit h dra gging mous e or r emot e direction.
63 | Pa g e.
64 | Pa g e ▒ Chapter 8. Event Setup ▒ 8-1. Sensor It is for sensor setup. [1] Sensor Input : S elect the sensor input channel. [2] On/Off : Select the sensor usage. [3] Input Type: Sele ct t he sensor input type. • N/Open (NORMAL OPEN) : The contact is normally opened but close when the signal is generated.
65 | Pa g e 8-2. Motion Detection It is the motion d etection setup menu. [1] Channel : Select the mot ion detection channel. [2] On/Off : Select the motion detection usage. [3] Sensitivity : Select the sen sitivi ty of motion detection. P lease apply it after the actual testin g.
66 | Pa g e.
67 | Pa g e 8-3. Event Action Event record will be made as per the setup. [1] Motion : It is the setup for PTZ, pop-up, relay out, buzze r in motion detection. • Channel : Select the channel to apply. • Preset channel : Select the pr eset camera being applied for t he event.
68 | Pa g e [2] Sensor : It is the setup for PTZ, pop-up, relay out, buzzer in sensor triggering. • Preset channel : Select the pr eset camera being applied for t he event. • Preset number : Select the preset number to move. • Popup Channel : Select the u sage Popup usage by ON/OFF.
69 | Pa g e ▒ Chapter 9. Search ▒ 9-1. Search Menu It supports the various ways of search mode such as Calendar, D ate/Time, Event, etc. [1] How to call menu : Select the “SEARCH” from remote controll er and right button of mouse. [2] Search mode selection · Calendar search: It searches by calendar.
70 | Pa g e 9-2. Calendar Search It searches using by the calendar. [1] If there is the recorded dat a on DVR, it shows red color on recorded date. Using the direction key, you can change th e YE AR/MONTH/DATE. [2] If there is the recorded dat a, it shows red color so, press the enter button on selected date.
71 | Pa g e ( Channel displa y could be differe nt per model 4ch/8 ch/16ch) 9-3. Date/Time Search If you know the specific date/ T ime, input the time to search. [1] Record begin : It shows the record began time. [2] Record end : It shows the record end time.
72 | Pa g e 9-4. Event Search It searches event recorded da ta. [1] Record begin : It shows the record began time. [2] Record end : It shows the record end time. [3] Channel : Select the channel to sear ch. [4] Play Begin : Input the time to search. [5] Play : If you click “Play”, it playback the selected time.
73 | Pa g e 9-5. Go to First / Go to Last It searches the first or last recorded image. 9-6. Search Control [Control by Mouse] Description of search button [1] X1 playba ck [2] Pause [3] Stop [4] Reve.
74 | Pa g e 9-7. Audio Audio can be listened in Live or Search. . [1] Menu recall : If you select t he “AUDIO” during the live or playback, the audio out menu show up. The menu call is possible by remote controller or mo use. [2] Mode selection • OFF : No audi o use.
75 | Pa g e ▒ Chapter 10. Backup ▒ 10-1. Backup Selected image can be backup to the external devi ce(USB). Conne ct the USB pen drive to the DVR and select ‘BACKUP’ butt on from remote cont roller or, c lick the right button of mouse. [1] Select the recognized backup device.
76 | Pa g e ( Channel display could be differe nt per model 4ch/8ch/16ch) [4] Select the minute. Once you select “Start“, the time will b e automatically input. [5] Backup end time selection • If the backup end time is the sa me hour, select the minute an d click, “end“, the time will be automatically input.
77 | Pa g e [6] Camera : Select the channel to be backup.( Selected cha nnel will be shown as red) [7] Backup Start : If all setup is c ompleted, click the ‘Backup start’ button then, backup star ts. It shows the backup capacity/ USB pen drive capacity“ so, if everything is OK, click ‘OK’.
78 | Pa g e • Format Backup Disk : Select wh ether the viewer program will b e backup together with data file.- Executable format : Viewer program will b backup togethe r [9] Backup Start : The backup star t after click ‘OK’ [10] How to use the viewer progr am( If you click the backup fil e, it runs automatically).
79 | Pa g e ▒ SPECIF ICA TION S ▒ F D S - 4 4 0 S D I Operating S ystem Embedded Li nux Compression H.264 Audio compre ssion G723.1 Video S t andar d NTSC / P AL Video In/Out Input 4Ch Output 1 x HDMI / 1 x VGA / 1 x SPO T(BNC) R esolution Max.
80 | Pa g e ▒ Chapter 11. Mobile Applications ▒ Mobile and R emote Client A pplication s 1. iPhone iPhone Application Installatio n 1. Access the “App Store” from your iPhone or iTunes applicatio n. 2. Search for “MPRMS”. 3. Choose to download and install the application (there is no charge to use our MPRMS application).
81 | Pa g e Adding a DVR To Your iPhones MPRMS Application Launch the M PRMS Application, and press “N ew” E n t e r t h e “ R e g N a m e ” ( R e g i s t r a t i o n N a m e ) . T h i s c a n b e a n y n a m e t o i d e n t i f y t h e s p e c i f i e d D V R .
82 | Pa g e MPEG4 DVRs’ = FDS-110 MJPEG DVRs’ = MJPEG Enter t he login information of the DVR. The login in formation M U S T M A T C H t h e l o g i n i n f o r m a t i o n on the DVR.
83 | Pa g e DVR ID: Enter the User I D for accessing the DVR. P ass wor d: Enter the password for accessing the DVR. Enter the DVR IP Address & P or t Number (Y ou can also enter the domai n name address h ere) DDNS Use Please disregard this configuration option if yo u are using DVR withi n the Un ited S tates.
84 | Pa g e Connect remot e access.
85 | Pa g e “CH SELECT” to sel ect camer a number . PTZ : select when controlling pan-tilt The screen displays only video excluding time, r esolution and t he name of channel. The feature is designed to transmit still photo in cer tain inte r vals when video streamin g is interrupted due t o network load.
86 | Pa g e Search from iPhone Select “ search” the ic on below . [1] S elect Date/ Time Af ter selecting a date, select “SEARCH” . [2] Search key op eratio n.
87 | Pa g e P l a y r e v e r s e P a u s e P l a y Switch to Li ve Controlling Relay-Out from iPhone R elay can be controlled r emotely .. Time selection : Set the duration time o f alarm output Off : Alarm off Infinity : Keep the alarm output continued PTZ control from iPhone PTZ control is av ailable on iPhone.
88 | Pa g e (1) Select (2) Cancel (3) Automatic camera focus (4) Call the PTZ menu (5) Direction button (6) Camera focus control (7) Camera zoom control (8) Select the channel (9) R elay out b utton (.
89 | Pa g e 2. Android Phone Program Install ation for Android T o i n st a l l th e p r o g ra m o n t he P h on e, e x ec ut e t he ‘ M A R K ET ’ p r o gr am and download the ‘MPRMS’ to install. If the installation is completed, you will see the ‘MP RMS’ icon on the main SCREEN.
90 | Pa g e ( S e l e c t t h e i c o n ) ( E x e c u t e d P r o g r a m ) Register the product i nformation for Android R egister the product inf ormation for remote monitoring.
91 | Pa g e (1) ( 2 ) ( 3 ) (1) Ente r the na me, Pr oduct ID (User) a nd P asswo rd. N a m e : E n t e r a n y n a m e y o u w a n t . User : Enter the “User ID” register ed to the DVR. P a s s w o r d : E n t e r t h e “ P a s s w o r d ” r e g i s t e r e d t o t h e D V R .
92 | Pa g e Select to edit th e registered info. Select to delet e the regi stered info. Close T OOL menu (As a dual function , it ends the connection) Remote connection for Android Select the register ed list for connection. Once you click the r egistered devic e, it sh ows th e brie f information l ike the 1 st pictu re below .
93 | Pa g e ( S e l e c t t h e l i s t ) ( D e t a i l e d i n f o . ) Live view on Android It shows the currently monitor ed images with real-time. (1) Numeric Button : Press a numeric button to select a channel .
94 | Pa g e On the bottom line o f screen, there is a main menu. Select the menu to ch ange the function Go back to t he previous step or close the monitoring program Move to live mode (Chan nel change, 1 Frame and OSD display is a v ailable) Go to PTZ mode Go to PTZ preset mode Go to search mode Go to alarm mode See the regis tered i nfo.
95 | Pa g e PTZ control for Android Y ou can control the PT Z camera remot ely . ( S e l e c t P T Z m o d e ) ( P T Z m o d e s c r e e n ) (1) Go to PTZ mode Select the PT Z connected channel and click the PTZ bu tton. (2) H ow to co ntr ol PT Z The PTZ c amera moves to the selected direction .
96 | Pa g e I R I S O p e n / C l o s e . C a l l t h e P T Z m e n u A u t o F o c u s O K b u t t o n f o r P T Z O S D m e n u C a n c e l o r t h e u p p e r m e n u o n P T Z O S D m e n u PTZ Preset for Android Y ou can set the mov ement of PTZ camera previously and ma ke the automatic PTZ movement.
97 | Pa g e Search on Android ( 1 . S e l e c t t h e s e a r c h m o d e ) ( 2 . S e l e c t “ T i m e S e a r c h ” ) ( 3 . S e l e c t t h e d a t e a n d t i m e ) (1) Select th e search mode (2) S elect “Time Sea rch”: Select “ Time Sear ch” to ente r the sear ch conditions.
98 | Pa g e Relay Out for Android R elay can be controlled re motely . (1) R elay : Select On or Off (2) Number : Select the relay number . (3) Time : Select the duration time.
99 | Pa g e Information displa y option on Android It sh ows the inf ormation of current connection . ( S e l e c t i n f o ) ( D i s p l a y t h e c o n n e c t i o n i n f o ) [ D i s p l a y I n f o ] Belo w is the exampl e for an explan ation. • I P : 61.
100 | Pa ge End the connec tion for Android ( S e l e c t t h e b a c k b u t t o n ) ( S e l e c t t h e Y e s b u t t o n ) There are several ways to finish the program. 1. If you click ‘BACK’ , it asks like “Do you want to disconnect ?” Then, you may click Y es.
101 | Pa ge 3. Windows Mobile Install the program to Windows Mobile Copy the program, MPRMS and sav e it to the mobile phone. Execute the program for Windows Mobile After save the progra m into the any folder , y ou can see the “MP RMS_Setup. cab” file as below picture .
102 | Pa ge Y ou can see the icon o f “MPRMS” . Register the Product Information on Windows Mobile For mobile viewing, you must re gister the network information o f the DVR. As for the network set ting of DVR, please refer to the user ’ s manual of DVR.
103 | Pa g e [2] Fi ll in t he required in formation . Enter info. lik e the picture above. • NAME : Inpu t any name you want. • ID : Enter the DVR’ s login ID . • P ASS : Enter the DVR’ s login p assword. • MODEL : Select the spec. of the model among H.
104 | Pa ge • U s e D D N S : S e l e c t i f y o u a r e a d y n a m i c I P u s e r . • ADDR : Keep the default valu e of the DDNS ser ver address (Default: www .adtcapscctv .net) • PORT : The port v alue will be changed automatically . Keep th e value as i t is.
105 | Pa ge • Connect : Click the “Connect” to see the video. • Info Setup : T o chang e the DVR information, click the “Info Setup ” . • 1 Only : When selected, it t ransmits a st ill image with the c er tain inter val in case th e video streaming is interrup ted due to the netw ork load.
106 | Pa g e T o connect the other DVR, click the “DVR” and select the r egist ered DVR in the “DEVICE ” . After selecting the DVR, click the “Connect” t o see the video.
107 | Pa ge PTZ Control fo r Windows Mobile C l i c k “ P a n T i l t ” t o c o n t r o l t h e P T Z c a m e r a . P r e s s t h e d i r e c t i o n button to move the camera position. [NO TE : In or der to st op moving, user must press the “ST OP” button.
108 | Pa ge Preset Y ou can save the c amera loca tion previously and then send t h e c a m e r a t o m o v e t o a s p e c i f i e d pre-position. • P 1 ~ P 1 6 : S e l e c t n u m b e r s t o s a .
109 | Pa ge Remote Alarm Control for Windows Mobile Click “ Alarm” to contr ol alarm output. • Select a number (1~16) : Rel ay out por t. (Default : 1) • Time : Set the durat ion time. • ON/OFF : Press to start or stop. ( E x a m p l e : I f t h e d u r a t i o n t i m e i s s e t w i t h 5 s e c .
4. Internet Explorer Versio n 7 and later The monitoring by the web browse r is available as the web ser ve r is built i n the DV R. Initial Connection I f y o u h a v e a c t u a l T C P I P a d d r .
111 | Pa ge In the first connection, install “ ActiveX” . If the ActiveX is i n s t a l l e d , t h e n D V R I P a n d D V R P o r t i s s e t a s a default val ue by itself . So if you enter the user ID and pa sswo rd, you can conne ct to the DVR.
112 | Pa ge Display Configura tion (1) D isplay area : Whenever you cl ick , the selected c hanne l or split screen is displayed. ( 2 ) D V R N a m e : E n t e r a n y n a m e y o u w a n t . W h e n y o u r e c o n n e c t th e DVR in the same pc, the name is saved.
113 | Pa g e • D i r e c t o r y : S e l e c t s t h e f o l d e r t o s a v e . • F i l e n a m e : E n t e r t h e f i l e n a m e t o s a v e . • Channel: Select the channel to back up. (10) JPG : Capture the current pictur e with jpg file and sh ow the saved folder with popup message.
114 | Pa g e INDEX Acronym Definition DHCP , 30 DMZ, 31 D-sub, 13 DT E , 2 0 DVR, 2 ISP , 31 administrator, 20, 23 alarm out , 19 Alarm Sensor Extension Box, 18 Android, 89, 90, 91, 92, 93, 95, 96, 97.
115 | Pa g e Zoom, 95, 107.
116 | Pa g e Limited 2 Y e ar W arran ty This warranty gives the origina l purchaser specific legal rights and you may also have other rights, which may var y from state to state.
117 | Pa g e M E M O.
An important point after buying a device Clover Electronics HDV045 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clover Electronics HDV045 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clover Electronics HDV045 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clover Electronics HDV045 you will learn all the available features of the product, as well as information on its operation. The information that you get Clover Electronics HDV045 will certainly help you make a decision on the purchase.
If you already are a holder of Clover Electronics HDV045, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clover Electronics HDV045.
However, one of the most important roles played by the user manual is to help in solving problems with Clover Electronics HDV045. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clover Electronics HDV045 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
